🚨 CVE-2025-21958
In the Linux kernel, the following vulnerability has been resolved:

Revert "openvswitch: switch to per-action label counting in conntrack"

Currently, ovs_ct_set_labels() is only called for confirmed conntrack
entries (ct) within ovs_ct_commit(). However, if the conntrack entry
does not have the labels_ext extension, attempting to allocate it in
ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in
nf_ct_ext_add():

WARN_ON(nf_ct_is_confirmed(ct));

This happens when the conntrack entry is created externally before OVS
increments net->ct.labels_used. The issue has become more likely since
commit fcb1aa5163b1 ("openvswitch: switch to per-action label counting
in conntrack"), which changed to use per-action label counting and
increment net->ct.labels_used when a flow with ct action is added.

Since there’s no straightforward way to fully resolve this issue at the
moment, this reverts the commit to avoid breaking existing use cases.

🎖@cveNotify

🚨 CVE-2025-22079
In the Linux kernel, the following vulnerability has been resolved:

ocfs2: validate l_tree_depth to avoid out-of-bounds access

The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.

Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1].

🎖@cveNotify

🚨 CVE-2025-22082
In the Linux kernel, the following vulnerability has been resolved:

iio: backend: make sure to NULL terminate stack buffer

Make sure to NULL terminate the buffer in
iio_backend_debugfs_write_reg() before passing it to sscanf(). It is a
stack variable so we should not assume it will 0 initialized.

🎖@cveNotify

🚨 CVE-2025-22083
In the Linux kernel, the following vulnerability has been resolved:

vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint

If vhost_scsi_set_endpoint is called multiple times without a
vhost_scsi_clear_endpoint between them, we can hit multiple bugs
found by Haoran Zhang:

1. Use-after-free when no tpgs are found:

This fixes a use after free that occurs when vhost_scsi_set_endpoint is
called more than once and calls after the first call do not find any
tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds
tpgs to add to the vs_tpg array match=true, so we will do:

vhost_vq_set_backend(vq, vs_tpg);
...

kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;

If vhost_scsi_set_endpoint is called again and no tpgs are found
match=false so we skip the vhost_vq_set_backend call leaving the
pointer to the vs_tpg we then free via:

kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;

If a scsi request is then sent we do:

vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend

which sees the vs_tpg we just did a kfree on.

2. Tpg dir removal hang:

This patch fixes an issue where we cannot remove a LIO/target layer
tpg (and structs above it like the target) dir due to the refcount
dropping to -1.

The problem is that if vhost_scsi_set_endpoint detects a tpg is already
in the vs->vs_tpg array or if the tpg has been removed so
target_depend_item fails, the undepend goto handler will do
target_undepend_item on all tpgs in the vs_tpg array dropping their
refcount to 0. At this time vs_tpg contains both the tpgs we have added
in the current vhost_scsi_set_endpoint call as well as tpgs we added in
previous calls which are also in vs->vs_tpg.

Later, when vhost_scsi_clear_endpoint runs it will do
target_undepend_item on all the tpgs in the vs->vs_tpg which will drop
their refcount to -1. Userspace will then not be able to remove the tpg
and will hang when it tries to do rmdir on the tpg dir.

3. Tpg leak:

This fixes a bug where we can leak tpgs and cause them to be
un-removable because the target name is overwritten when
vhost_scsi_set_endpoint is called multiple times but with different
target names.

The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup
a vhost-scsi device to target/tpg mapping, then calls
VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we
haven't seen before (target1 has tpg1 but target2 has tpg2). When this
happens we don't teardown the old target tpg mapping and just overwrite
the target name and the vs->vs_tpg array. Later when we do
vhost_scsi_clear_endpoint, we are passed in either target1 or target2's
name and we will only match that target's tpgs when we loop over the
vs->vs_tpg. We will then return from the function without doing
target_undepend_item on the tpgs.

Because of all these bugs, it looks like being able to call
vhost_scsi_set_endpoint multiple times was never supported. The major
user, QEMU, already has checks to prevent this use case. So to fix the
issues, this patch prevents vhost_scsi_set_endpoint from being called
if it's already successfully added tpgs. To add, remove or change the
tpg config or target name, you must do a vhost_scsi_clear_endpoint
first.

🎖@cveNotify

🚨 CVE-2025-22084
In the Linux kernel, the following vulnerability has been resolved:

w1: fix NULL pointer dereference in probe

The w1_uart_probe() function calls w1_uart_serdev_open() (which includes
devm_serdev_device_open()) before setting the client ops via
serdev_device_set_client_ops(). This ordering can trigger a NULL pointer
dereference in the serdev controller's receive_buf handler, as it assumes
serdev->ops is valid when SERPORT_ACTIVE is set.

This is similar to the issue fixed in commit 5e700b384ec1
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.

Fix the race by ensuring client ops are set before enabling the port via
w1_uart_serdev_open().

🎖@cveNotify

🚨 CVE-2024-1212
Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.

🎖@cveNotify

🚨 CVE-2024-6670
In WhatsUp Gold versions released before 2024.0.0, a SQL Injection vulnerability allows an unauthenticated attacker to retrieve the users encrypted password.

🎖@cveNotify

🚨 CVE-2024-11680
ProjectSend versions prior to r1720 are affected by an improper authentication vulnerability. Remote, unauthenticated attackers can exploit this flaw by sending crafted HTTP requests to options.php, enabling unauthorized modification of the application's configuration. Successful exploitation allows attackers to create accounts, upload webshells, and embed malicious JavaScript.

🎖@cveNotify

🚨 CVE-2025-31324
SAP NetWeaver Visual Composer Metadata Uploader is not protected with a proper authorization, allowing unauthenticated agent to upload potentially malicious executable binaries that could severely harm the host system. This could significantly affect the confidentiality, integrity, and availability of the targeted system.

🎖@cveNotify

🚨 CVE-2018-2380
SAP CRM, 7.01, 7.02,7.30, 7.31, 7.33, 7.54, allows an attacker to exploit insufficient validation of path information provided by users, thus characters representing "traverse to parent directory" are passed through to the file APIs.

🎖@cveNotify

🚨 CVE-2018-7600
Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.

🎖@cveNotify

🚨 CVE-2018-20250
In WinRAR versions prior to and including 5.61, There is path traversal vulnerability when crafting the filename field of the ACE format (in UNACEV2.dll). When the filename field is manipulated with specific patterns, the destination (extraction) folder is ignored, thus treating the filename as an absolute path.

🎖@cveNotify

🚨 CVE-2019-0344
Due to unsafe deserialization used in SAP Commerce Cloud (virtualjdbc extension), versions 6.4, 6.5, 6.6, 6.7, 1808, 1811, 1905, it is possible to execute arbitrary code on a target machine with 'Hybris' user rights, resulting in Code Injection.

🎖@cveNotify

🚨 CVE-2020-6207
SAP Solution Manager (User Experience Monitoring), version- 7.2, due to Missing Authentication Check does not perform any authentication for a service resulting in complete compromise of all SMDAgents connected to the Solution Manager.

🎖@cveNotify

🚨 CVE-2020-5847
Unraid through 6.8.0 allows Remote Code Execution.

🎖@cveNotify

🚨 CVE-2020-5849
Unraid 6.8.0 allows authentication bypass.

🎖@cveNotify

🚨 CVE-2020-5722
The HTTP interface of the Grandstream UCM6200 series is vulnerable to an unauthenticated remote SQL injection via crafted HTTP request. An attacker can use this vulnerability to execute shell commands as root on versions before 1.0.19.20 or inject HTML in password recovery emails in versions before 1.0.20.17.

🎖@cveNotify

🚨 CVE-2020-5735
Amcrest cameras and NVR are vulnerable to a stack-based buffer overflow over port 37777. An authenticated remote attacker can abuse this issue to crash the device and possibly execute arbitrary code.

🎖@cveNotify

🚨 CVE-2020-5741
Deserialization of Untrusted Data in Plex Media Server on Windows allows a remote, authenticated attacker to execute arbitrary Python code.

🎖@cveNotify

🚨 CVE-2020-6287
SAP NetWeaver AS JAVA (LM Configuration Wizard), versions - 7.30, 7.31, 7.40, 7.50, does not perform an authentication check which allows an attacker without prior authentication to execute configuration tasks to perform critical actions against the SAP Java system, including the ability to create an administrative user, and therefore compromising Confidentiality, Integrity and Availability of the system, leading to Missing Authentication Check.

🎖@cveNotify

🚨 CVE-2023-35078
An authentication bypass vulnerability in Ivanti EPMM allows unauthorized users to access restricted functionality or resources of the application without proper authentication.

🎖@cveNotify