🚨 CVE-2025-10750
The PowerBI Embed Reports plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 1.2.0. This is due to missing capability checks and authentication verification on the 'testUser' endpoint accessible via the mo_epbr_admin_observer() function hooked on 'init'. This makes it possible for unauthenticated attackers to access sensitive Azure AD user information including personal identifiable information (PII) such as displayName, mail, phones, department, or detailed OAuth error data including Azure AD Application/Client IDs, error codes, trace IDs, and correlation IDs.

🎖@cveNotify

🚨 CVE-2025-11256
The Kognetiks Chatbot plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on several functions in all versions up to, and including, 2.3.5. This makes it possible for unauthenticated attackers to upload limited safe files and erase conversations.

🎖@cveNotify

🚨 CVE-2025-40001
In the Linux kernel, the following vulnerability has been resolved:

scsi: mvsas: Fix use-after-free bugs in mvs_work_queue

During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.

A typical race condition is illustrated below:

CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF

Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.

This bug was found by static analysis.

🎖@cveNotify

🚨 CVE-2025-40002
In the Linux kernel, the following vulnerability has been resolved:

thunderbolt: Fix use-after-free in tb_dp_dprx_work

The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(),
which does not ensure that the delayed work item tunnel->dprx_work has
fully completed if it was already running. This leads to use-after-free
scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while
tunnel->dprx_work remains active and attempts to dereference tb_tunnel
in tb_dp_dprx_work().

A typical race condition is illustrated below:

CPU 0 | CPU 1
tb_dp_tunnel_active() |
tb_deactivate_and_free_tunnel()| tb_dp_dprx_start()
tb_tunnel_deactivate() | queue_delayed_work()
tb_dp_activate() |
tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker
cancel_delayed_work() |
tb_tunnel_put(tunnel); |
| tunnel = container_of(...); //UAF
| tunnel-> //UAF

Replacing cancel_delayed_work() with cancel_delayed_work_sync() is
not feasible as it would introduce a deadlock: both tb_dp_dprx_work()
and the cleanup path acquire tb->lock, and cancel_delayed_work_sync()
would wait indefinitely for the work item that cannot proceed.

Instead, implement proper reference counting:
- If cancel_delayed_work() returns true (work is pending), we release
the reference in the stop function.
- If it returns false (work is executing or already completed), the
reference is released in delayed work function itself.

This ensures the tb_tunnel remains valid during work item execution
while preventing memory leaks.

This bug was found by static analysis.

🎖@cveNotify

🚨 CVE-2025-9890
The Theme Editor plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.0. This is due to missing or incorrect nonce validation on the 'theme_editor_theme' page. This makes it possible for unauthenticated attackers to achieve remote code execution via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

🎖@cveNotify

🚨 CVE-2025-11926
The Related Posts Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

🎖@cveNotify

🚨 CVE-2025-47410
Apache Geode is vulnerable to CSRF attacks through GET requests to the Management and Monitoring REST API that could allow an attacker who has tricked a user into giving up their Geode session credentials to submit malicious commands on the target system on behalf of the authenticated user.


This issue affects Apache Geode: versions 1.10 through 1.15.1

Users are recommended to upgrade to version 1.15.2, which fixes the issue.

🎖@cveNotify

🚨 CVE-2025-11647
A flaw has been found in Tomofun Furbo 360 and Furbo Mini. This issue affects some unknown processing of the component GATT Service. This manipulation of the argument DeviceToken causes information disclosure. The attack is only possible within the local network. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-62672
rplay through 3.3.2 allows attackers to cause a denial of service (SIGSEGV and daemon crash) or possibly have unspecified other impact. This occurs in memcpy in the RPLAY_DATA case in rplay_unpack in librplay/rplay.c, potentially reachable via packet data with no authentication.

🎖@cveNotify

🚨 CVE-2025-62672
rplay through 3.3.2 allows attackers to cause a denial of service (SIGSEGV and daemon crash) or possibly have unspecified other impact. This occurs in memcpy in the RPLAY_DATA case in rplay_unpack in librplay/rplay.c, potentially reachable via packet data with no authentication.

🎖@cveNotify

🚨 CVE-2025-11938
A vulnerability was found in ChurchCRM up to 5.18.0. This vulnerability affects unknown code of the file setup/routes/setup.php. Performing manipulation of the argument DB_PASSWORD/ROOT_PATH/URL results in deserialization. The attack may be initiated remotely. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11939
A vulnerability was determined in ChurchCRM up to 5.18.0. This issue affects some unknown processing of the file src/ChurchCRM/Backup/RestoreJob.php of the component Backup Restore Handler. Executing manipulation of the argument restoreFile can lead to path traversal. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11940
A security vulnerability has been detected in LibreWolf up to 143.0.4-1 on Windows. This affects an unknown function of the file assets/setup.nsi of the component Installer. Such manipulation leads to uncontrolled search path. The attack must be carried out locally. Attacks of this nature are highly complex. The exploitability is reported as difficult. Upgrading to version 144.0-1 mitigates this issue. The name of the patch is dd10e31dd873e9cb309fad8aed921d45bf905a55. It is suggested to upgrade the affected component.

🎖@cveNotify

🚨 CVE-2024-36890
In the Linux kernel, the following vulnerability has been resolved:

mm/slab: make __free(kfree) accept error pointers

Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().

171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }

The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this.

🎖@cveNotify

🚨 CVE-2024-43877
In the Linux kernel, the following vulnerability has been resolved:

media: pci: ivtv: Add check for DMA map result

In case DMA fails, 'dma->SG_length' is 0. This value is later used to
access 'dma->SGarray[dma->SG_length - 1]', which will cause out of
bounds access.

Add check to return early on invalid value. Adjust warnings accordingly.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

🎖@cveNotify

🚨 CVE-2024-58011
In the Linux kernel, the following vulnerability has been resolved:

platform/x86: int3472: Check for adev == NULL

Not all devices have an ACPI companion fwnode, so adev might be NULL. This
can e.g. (theoretically) happen when a user manually binds one of
the int3472 drivers to another i2c/platform device through sysfs.

Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().

🎖@cveNotify

🚨 CVE-2025-11941
A vulnerability was detected in e107 CMS up to 2.3.3. This impacts an unknown function of the file /e107_admin/image.php?mode=main&action=avatar of the component Avatar Handler. Performing manipulation of the argument multiaction[] results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11942
A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11943
A vulnerability has been found in 70mai X200 up to 20251010. Affected by this vulnerability is an unknown functionality of the component HTTP Web Server. The manipulation leads to use of default credentials. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11944
A vulnerability was determined in givanz Vvveb up to 1.0.7.3. This affects the function Import of the file admin/controller/tools/import.php of the component Raw SQL Handler. This manipulation causes sql injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: 52204b4a106b2fb02d16eee06a88a1f2697f9b35. It is recommended to apply a patch to fix this issue.

🎖@cveNotify

🚨 CVE-2025-11945
A vulnerability was identified in toeverything AFFiNE up to 0.24.1. This vulnerability affects unknown code of the component Avatar Upload Image Endpoint. Such manipulation leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify