🚨 CVE-2024-56564
In the Linux kernel, the following vulnerability has been resolved:
ceph: pass cred pointer to ceph_mds_auth_match()
This eliminates a redundant get_current_cred() call, because
ceph_mds_check_access() has already obtained this pointer.
As a side effect, this also fixes a reference leak in
ceph_mds_auth_match(): by omitting the get_current_cred() call, no
additional cred reference is taken.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ceph: pass cred pointer to ceph_mds_auth_match()
This eliminates a redundant get_current_cred() call, because
ceph_mds_check_access() has already obtained this pointer.
As a side effect, this also fixes a reference leak in
ceph_mds_auth_match(): by omitting the get_current_cred() call, no
additional cred reference is taken.
🎖@cveNotify
🚨 CVE-2024-56565
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to drop all discards after creating snapshot on lvm device
Piergiorgio reported a bug in bugzilla as below:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 969 at fs/f2fs/segment.c:1330
RIP: 0010:__submit_discard_cmd+0x27d/0x400 [f2fs]
Call Trace:
__issue_discard_cmd+0x1ca/0x350 [f2fs]
issue_discard_thread+0x191/0x480 [f2fs]
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
w/ below testcase, it can reproduce this bug quickly:
- pvcreate /dev/vdb
- vgcreate myvg1 /dev/vdb
- lvcreate -L 1024m -n mylv1 myvg1
- mount /dev/myvg1/mylv1 /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=20
- sync
- rm /mnt/f2fs/file
- sync
- lvcreate -L 1024m -s -n mylv1-snapshot /dev/myvg1/mylv1
- umount /mnt/f2fs
The root cause is: it will update discard_max_bytes of mounted lvm
device to zero after creating snapshot on this lvm device, then,
__submit_discard_cmd() will pass parameter @nr_sects w/ zero value
to __blkdev_issue_discard(), it returns a NULL bio pointer, result
in panic.
This patch changes as below for fixing:
1. Let's drop all remained discards in f2fs_unfreeze() if snapshot
of lvm device is created.
2. Checking discard_max_bytes before submitting discard during
__submit_discard_cmd().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to drop all discards after creating snapshot on lvm device
Piergiorgio reported a bug in bugzilla as below:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 969 at fs/f2fs/segment.c:1330
RIP: 0010:__submit_discard_cmd+0x27d/0x400 [f2fs]
Call Trace:
__issue_discard_cmd+0x1ca/0x350 [f2fs]
issue_discard_thread+0x191/0x480 [f2fs]
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
w/ below testcase, it can reproduce this bug quickly:
- pvcreate /dev/vdb
- vgcreate myvg1 /dev/vdb
- lvcreate -L 1024m -n mylv1 myvg1
- mount /dev/myvg1/mylv1 /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=20
- sync
- rm /mnt/f2fs/file
- sync
- lvcreate -L 1024m -s -n mylv1-snapshot /dev/myvg1/mylv1
- umount /mnt/f2fs
The root cause is: it will update discard_max_bytes of mounted lvm
device to zero after creating snapshot on this lvm device, then,
__submit_discard_cmd() will pass parameter @nr_sects w/ zero value
to __blkdev_issue_discard(), it returns a NULL bio pointer, result
in panic.
This patch changes as below for fixing:
1. Let's drop all remained discards in f2fs_unfreeze() if snapshot
of lvm device is created.
2. Checking discard_max_bytes before submitting discard during
__submit_discard_cmd().
🎖@cveNotify
🚨 CVE-2024-56570
In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
🎖@cveNotify
🚨 CVE-2025-11027
A vulnerability was identified in givanz Vvveb up to 1.0.7.2. Affected by this issue is some unknown functionality of the component SVG File Handler. Such manipulation leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."
🎖@cveNotify
A vulnerability was identified in givanz Vvveb up to 1.0.7.2. Affected by this issue is some unknown functionality of the component SVG File Handler. Such manipulation leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."
🎖@cveNotify
Gist
Vvveb-02-File_Upload_Bypass_To_RCE.md
GitHub Gist: instantly share code, notes, and snippets.
🚨 CVE-2025-11028
A security flaw has been discovered in givanz Vvveb up to 1.0.7.2. This affects an unknown part of the component Image Handler. Performing manipulation results in information disclosure. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."
🎖@cveNotify
A security flaw has been discovered in givanz Vvveb up to 1.0.7.2. This affects an unknown part of the component Image Handler. Performing manipulation results in information disclosure. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."
🎖@cveNotify
Gist
Vvveb-01-Image_Metadata_Leak.md
GitHub Gist: instantly share code, notes, and snippets.
🚨 CVE-2025-56463
Mercusys MW305R 3.30 and below is has a Transport Layer Security (TLS) certificate private key disclosure.
🎖@cveNotify
Mercusys MW305R 3.30 and below is has a Transport Layer Security (TLS) certificate private key disclosure.
🎖@cveNotify
GitHub
CVEs/CVE-2025-56463 at main · MatJosephs/CVEs
Contribute to MatJosephs/CVEs development by creating an account on GitHub.
🚨 CVE-2023-23313
Certain Draytek products are vulnerable to Cross Site Scripting (XSS) via the wlogin.cgi script and user_login.cgi script of the router's web application management portal. This affects Vigor3910, Vigor1000B, Vigor2962 v4.3.2.1; Vigor2865 and Vigor2866 v4.4.1.0; Vigor2927 v4.4.2.2; and Vigor2915, Vigor2765, Vigor2766, Vigor2135 v4.4.2.0; Vigor2763 v4.4.2.1; Vigor2862 and Vigor2926 v3.9.9.0; Vigor2925 v3.9.3; Vigor2952 and Vigor3220 v3.9.7.3; Vigor2133 and Vigor2762 v3.9.6.4; and Vigor2832 v3.9.6.2.
🎖@cveNotify
Certain Draytek products are vulnerable to Cross Site Scripting (XSS) via the wlogin.cgi script and user_login.cgi script of the router's web application management portal. This affects Vigor3910, Vigor1000B, Vigor2962 v4.3.2.1; Vigor2865 and Vigor2866 v4.4.1.0; Vigor2927 v4.4.2.2; and Vigor2915, Vigor2765, Vigor2766, Vigor2135 v4.4.2.0; Vigor2763 v4.4.2.1; Vigor2862 and Vigor2926 v3.9.9.0; Vigor2925 v3.9.3; Vigor2952 and Vigor3220 v3.9.7.3; Vigor2133 and Vigor2762 v3.9.6.4; and Vigor2832 v3.9.6.2.
🎖@cveNotify
Draytek
Cross-Site Scripting vulnerability (CVE-2023-23313)
🚨 CVE-2024-41015
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add bounds checking to ocfs2_check_dir_entry()
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add bounds checking to ocfs2_check_dir_entry()
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
🎖@cveNotify
🚨 CVE-2024-41016
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()
xattr in ocfs2 maybe 'non-indexed', which saved with additional space
requested. It's better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()
xattr in ocfs2 maybe 'non-indexed', which saved with additional space
requested. It's better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images.
🎖@cveNotify
🚨 CVE-2024-41017
In the Linux kernel, the following vulnerability has been resolved:
jfs: don't walk off the end of ealist
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
jfs: don't walk off the end of ealist
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
🎖@cveNotify
🚨 CVE-2024-8088
There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected.
🎖@cveNotify
There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected.
🎖@cveNotify
GitHub
[3.10] gh-123270: Replaced SanitizedNames with a more surgical fix. (… · python/cpython@0aa1ee2
…GH-123354) (#123426)
Applies changes from zipp 3.20.1 and jaraco/zippGH-124
(cherry picked from commit 2231286d78d328c2f575e0b05b16fe447d1656d6)
(cherry picked from commit 17b77bb)
Co-author...
Applies changes from zipp 3.20.1 and jaraco/zippGH-124
(cherry picked from commit 2231286d78d328c2f575e0b05b16fe447d1656d6)
(cherry picked from commit 17b77bb)
Co-author...
🚨 CVE-2024-56625
In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_set_termination(): allow sleeping GPIOs
In commit 6e86a1543c37 ("can: dev: provide optional GPIO based
termination support") GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the
GPIO. This leads to the following warning, if the systems uses a
sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c
| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the
use of sleeping GPIOs.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_set_termination(): allow sleeping GPIOs
In commit 6e86a1543c37 ("can: dev: provide optional GPIO based
termination support") GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the
GPIO. This leads to the following warning, if the systems uses a
sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c
| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the
use of sleeping GPIOs.
🎖@cveNotify
🚨 CVE-2024-41008
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: change vm->task_info handling
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: change vm->task_info handling
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting
🎖@cveNotify
🚨 CVE-2022-48819
In the Linux kernel, the following vulnerability has been resolved:
tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case
syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()
WARN_ON(sk_forward_alloc_get(sk));
While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.
We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.
Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case
syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()
WARN_ON(sk_forward_alloc_get(sk));
While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.
We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.
Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.
🎖@cveNotify
🚨 CVE-2024-41018
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add a check for attr_names and oatbl
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add a check for attr_names and oatbl
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
🎖@cveNotify
🚨 CVE-2024-41019
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate ff offset
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate ff offset
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read.
🎖@cveNotify
🚨 CVE-2024-41022
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
The "instance" variable needs to be signed for the error handling to work.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
The "instance" variable needs to be signed for the error handling to work.
🎖@cveNotify
🚨 CVE-2024-56609
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb
When removing kernel modules by:
rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core
Driver uses skb_queue_purge() to purge TX skb, but not report tx status
causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue()
to correct this.
Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing
between TX work and purge TX queue, flush and destroy TX work in advance.
wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local
choice (Reason: 3=DEAUTH_LEAVING)
------------[ cut here ]------------
Have pending ack frames!
WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
CPU: 3 PID: 9232 Comm: rmmod Tainted: G C
6.10.1-200.fc40.aarch64 #1
Hardware name: pine64 Pine64 PinePhone Braveheart
(1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
sp : ffff80008c1b37b0
x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0
x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff
x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000
x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000
x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964
x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0
x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000
Call trace:
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
idr_for_each+0x74/0x110
ieee80211_free_hw+0x44/0xe8 [mac80211]
rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio]
sdio_bus_remove+0x44/0x180
device_remove+0x54/0x90
device_release_driver_internal+0x1d4/0x238
driver_detach+0x54/0xc0
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x78
sdio_unregister_driver+0x2c/0x40
rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs]
__do_sys_delete_module.isra.0+0x190/0x338
__arm64_sys_delete_module+0x1c/0x30
invoke_syscall+0x74/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
---[ end trace 0000000000000000 ]---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb
When removing kernel modules by:
rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core
Driver uses skb_queue_purge() to purge TX skb, but not report tx status
causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue()
to correct this.
Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing
between TX work and purge TX queue, flush and destroy TX work in advance.
wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local
choice (Reason: 3=DEAUTH_LEAVING)
------------[ cut here ]------------
Have pending ack frames!
WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
CPU: 3 PID: 9232 Comm: rmmod Tainted: G C
6.10.1-200.fc40.aarch64 #1
Hardware name: pine64 Pine64 PinePhone Braveheart
(1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
sp : ffff80008c1b37b0
x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0
x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff
x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000
x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000
x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964
x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0
x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000
Call trace:
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
idr_for_each+0x74/0x110
ieee80211_free_hw+0x44/0xe8 [mac80211]
rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio]
sdio_bus_remove+0x44/0x180
device_remove+0x54/0x90
device_release_driver_internal+0x1d4/0x238
driver_detach+0x54/0xc0
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x78
sdio_unregister_driver+0x2c/0x40
rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs]
__do_sys_delete_module.isra.0+0x190/0x338
__arm64_sys_delete_module+0x1c/0x30
invoke_syscall+0x74/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
---[ end trace 0000000000000000 ]---
🎖@cveNotify
🔥1
🚨 CVE-2024-37629
SummerNote v0.9.1 is vulnerable to Cross Site Scripting (XSS) via the Code View Function.
🎖@cveNotify
SummerNote v0.9.1 is vulnerable to Cross Site Scripting (XSS) via the Code View Function.
🎖@cveNotify
GitHub
XSS Discovered in The Code View Function - Version 0.8.18+ · Issue #4642 · summernote/summernote
Checklist I've looked at the documentation to make sure the behavior isn't documented and expected. I'm sure this is an issue with Summernote, not with my app or other dependencies (Ang...
🚨 CVE-2024-40992
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder length checking for UD request packets
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder length checking for UD request packets
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
🎖@cveNotify
🚨 CVE-2024-40999
In the Linux kernel, the following vulnerability has been resolved:
net: ena: Add validation for completion descriptors consistency
Validate that `first` flag is set only for the first
descriptor in multi-buffer packets.
In case of an invalid descriptor, a reset will occur.
A new reset reason for RX data corruption has been added.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: ena: Add validation for completion descriptors consistency
Validate that `first` flag is set only for the first
descriptor in multi-buffer packets.
In case of an invalid descriptor, a reset will occur.
A new reset reason for RX data corruption has been added.
🎖@cveNotify