🚨 CVE-2024-41033
In the Linux kernel, the following vulnerability has been resolved:

cachestat: do not flush stats in recency check

syzbot detects that cachestat() is flushing stats, which can sleep, in its
RCU read section (see [1]). This is done in the workingset_test_recent()
step (which checks if the folio's eviction is recent).

Move the stat flushing step to before the RCU read section of cachestat,
and skip stat flushing during the recency check.

[1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/

🎖@cveNotify

🚨 CVE-2023-52888
In the Linux kernel, the following vulnerability has been resolved:

media: mediatek: vcodec: Only free buffer VA that is not NULL

In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly
called only when the buffer to free exists, there are some instances
that didn't do the check and triggered warnings in practice.

We believe those checks were forgotten unintentionally. Add the checks
back to fix the warnings.

🎖@cveNotify

🚨 CVE-2022-49043
xmlXIncludeAddNode in xinclude.c in libxml2 before 2.11.0 has a use-after-free.

🎖@cveNotify

🚨 CVE-2024-41027
In the Linux kernel, the following vulnerability has been resolved:

Fix userfaultfd_api to return EINVAL as expected

Currently if we request a feature that is not set in the Kernel config we
fail silently and return all the available features. However, the man
page indicates we should return an EINVAL.

We need to fix this issue since we can end up with a Kernel warning should
a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with
the config not set with this feature.

[ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660
[ 200.820738] Modules linked in:
[ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8
[ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022
[ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660

🎖@cveNotify

🚨 CVE-2024-41032
In the Linux kernel, the following vulnerability has been resolved:

mm: vmalloc: check if a hash-index is in cpu_possible_mask

The problem is that there are systems where cpu_possible_mask has gaps
between set CPUs, for example SPARC. In this scenario addr_to_vb_xa()
hash function can return an index which accesses to not-possible and not
setup CPU area using per_cpu() macro. This results in an oops on SPARC.

A per-cpu vmap_block_queue is also used as hash table, incorrectly
assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index
to a next possible CPU.

🎖@cveNotify

🚨 CVE-2024-41034
In the Linux kernel, the following vulnerability has been resolved:

nilfs2: fix kernel bug on rename operation of broken directory

Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.

This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.

Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot().

🎖@cveNotify

🚨 CVE-2024-41035
In the Linux kernel, the following vulnerability has been resolved:

USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor

Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0. As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number. This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).

To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".) This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates.

🎖@cveNotify

🚨 CVE-2024-42084
In the Linux kernel, the following vulnerability has been resolved:

ftruncate: pass a signed offset

The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.

Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.

The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake.

🎖@cveNotify

🚨 CVE-2024-42087
In the Linux kernel, the following vulnerability has been resolved:

drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep

The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue.

🎖@cveNotify

🚨 CVE-2024-42091
In the Linux kernel, the following vulnerability has been resolved:

drm/xe: Check pat.ops before dumping PAT settings

We may leave pat.ops unset when running on brand new platform or
when running as a VF. While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.

It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant.

🎖@cveNotify

🚨 CVE-2024-42095
In the Linux kernel, the following vulnerability has been resolved:

serial: 8250_omap: Implementation of Errata i2310

As per Errata i2310[0], Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts, therefore apply Errata i2310 solution.

[0] https://www.ti.com/lit/pdf/sprz536 page 23

🎖@cveNotify

🚨 CVE-2024-42097
In the Linux kernel, the following vulnerability has been resolved:

ALSA: emux: improve patch ioctl data validation

In load_data(), make the validation of and skipping over the main info
block match that in load_guspatch().

In load_guspatch(), add checking that the specified patch length matches
the actually supplied data, like load_data() already did.

🎖@cveNotify

🚨 CVE-2024-42098
In the Linux kernel, the following vulnerability has been resolved:

crypto: ecdh - explicitly zeroize private_key

private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.

Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails.

🎖@cveNotify

🚨 CVE-2024-5642
CPython 3.9 and earlier doesn't disallow configuring an empty list ("[]") for SSLContext.set_npn_protocols() which is an invalid value for the underlying OpenSSL API. This results in a buffer over-read when NPN is used (see CVE-2024-5535 for OpenSSL). This vulnerability is of low severity due to NPN being not widely used and specifying an empty list likely being uncommon in-practice (typically a protocol name would be configured).

🎖@cveNotify

🚨 CVE-2024-42120
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Check pipe offset before setting vblank

pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.

This fixes an OVERRUN issue reported by Coverity.

🎖@cveNotify

🚨 CVE-2024-56591
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: hci_conn: Use disable_delayed_work_sync

This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed.

🎖@cveNotify

🚨 CVE-2025-56161
YOSHOP 2.0 allows unauthenticated information disclosure via comment-list API endpoints in the Goods module. The Comment model eagerly loads the related User model without field filtering; because User.php defines no $hidden or $visible attributes, sensitive fields (bcrypt password hash, mobile number, pay_money, expend_money.) are exposed in JSON responses. Route names vary per deployment (e.g. /api/goods.pinglun/list), but all call the same vulnerable model logic.

🎖@cveNotify

🚨 CVE-2025-56162
YOSHOP 2.0 suffers from an unauthenticated SQL injection in the goodsIds parameter of the /api/goods/listByIds endpoint. The getListByIds function concatenates user input into orderRaw('field(goods_id, ...)'), allowing attackers to: (a) enumerate or modify database data, including dumping admin password hashes; (b) write web-shell files or invoke xp_cmdshell, leading to remote code execution on servers configured with sufficient DB privileges.

🎖@cveNotify

🚨 CVE-2025-60660
Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the mac parameter in the fromAdvSetMacMtuWan function.

🎖@cveNotify

🚨 CVE-2025-60662
Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the wanSpeed parameter in the fromAdvSetMacMtuWan function.

🎖@cveNotify

🚨 CVE-2025-60661
Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the cloneType parameter in the fromAdvSetMacMtuWan function.

🎖@cveNotify