🚨 CVE-2024-26670
In the Linux kernel, the following vulnerability has been resolved:

arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD

Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.

The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:

* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en

In both cases the workaround is described as:

| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.

The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".

Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:

| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]

This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.

The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:

| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret

The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:

| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.

... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".

🎖@cveNotify

🚨 CVE-2022-48908
In the Linux kernel, the following vulnerability has been resolved:

net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()

During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.

The following log reveals it:

[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370

Fix this by checking whether the 'ci' is a null pointer first.

🎖@cveNotify

🚨 CVE-2024-46465
By default, dedicated folders of CRYHOD for Windows up to 2024.3 can be accessed by other users to misuse technical files and make them perform tasks with higher privileges. Configuration of CRYHOD has to be modified to prevent this vulnerability.

🎖@cveNotify

🚨 CVE-2024-52507
Nextcloud Tables allows users to to create tables with individual columns. The information which Table (numeric ID) is shared with which groups and users and the respective permissions was not limited to affected users. It is recommended that the Nextcloud Tables app is upgraded to 0.8.1.

🎖@cveNotify

🚨 CVE-2024-52508
Nextcloud Mail is the mail app for Nextcloud, a self-hosted productivity platform. When a user is trying to set up a mail account with an email address like user@example.tld that does not support auto configuration, and an attacker managed to register autoconfig.tld, the used email details would be send to the server of the attacker. It is recommended that the Nextcloud Mail app is upgraded to 1.14.6, 1.15.4, 2.2.11, 3.6.3, 3.7.7 or 4.0.0.

🎖@cveNotify

🚨 CVE-2024-52511
Nextcloud Tables allows users to to create tables with individual columns. By directly specifying the ID of a table or view, a malicious user could blindly insert new rows into tables they have no access to. It is recommended that the Nextcloud Tables is upgraded to 0.8.0.

🎖@cveNotify

🚨 CVE-2024-52513
Nextcloud Server is a self hosted personal cloud system. After receiving a "Files drop" or "Password protected" share link a malicious user was able to download attachments that are referenced in Text files without providing the password. It is recommended that the Nextcloud Server is upgraded to 28.0.11, 29.0.8 or 30.0.1 and Nextcloud Enterprise Server is upgraded to 25.0.13.13, 26.0.13.9, 27.1.11.9, 28.0.11, 29.0.8 or 30.0.1.

🎖@cveNotify

🚨 CVE-2024-48536
Incorrect access control in eSoft Planner 3.24.08271-USA allow attackers to view all transactions performed by the company via supplying a crafted web request.

🎖@cveNotify

🚨 CVE-2024-5918
An improper certificate validation vulnerability in Palo Alto Networks PAN-OS software enables an authorized user with a specially crafted client certificate to connect to an impacted GlobalProtect portal or GlobalProtect gateway as a different legitimate user. This attack is possible only if you "Allow Authentication with User Credentials OR Client Certificate."

🎖@cveNotify

🚨 CVE-2024-10921
An authorized user may trigger crashes or receive the contents of buffer over-reads of Server memory by issuing specially crafted requests that construct malformed BSON in the MongoDB Server. This issue affects MongoDB Server v5.0 versions prior to 5.0.30 , MongoDB Server v6.0 versions prior to 6.0.19, MongoDB Server v7.0 versions prior to 7.0.15 and MongoDB Server v8.0 versions prior to and including 8.0.2.

🎖@cveNotify

🚨 CVE-2024-37285
A deserialization issue in Kibana can lead to arbitrary code execution when Kibana attempts to parse a YAML document containing a crafted payload. A successful attack requires a malicious user to have a combination of both specific Elasticsearch indices privileges https://www.elastic.co/guide/en/elasticsearch/reference/current/defining-roles.html#roles-indices-priv  and Kibana privileges https://www.elastic.co/guide/en/fleet/current/fleet-roles-and-privileges.html  assigned to them.



The following Elasticsearch indices permissions are required

* write privilege on the system indices .kibana_ingest*
* The allow_restricted_indices flag is set to true


Any of the following Kibana privileges are additionally required

* Under Fleet the All privilege is granted
* Under Integration the Read or All privilege is granted
* Access to the fleet-setup privilege is gained through the Fleet Server’s service account token

🎖@cveNotify

🚨 CVE-2024-52515
Nextcloud Server is a self hosted personal cloud system. After an admin enables the default-disabled SVG preview provider, a malicious user could upload a manipulated SVG file referencing paths. If the file would exist the preview of the SVG would preview the other file instead. It is recommended that the Nextcloud Server is upgraded to 27.1.10, 28.0.6 or 29.0.1 and Nextcloud Enterprise Server is upgraded to 24.0.12.15, 25.0.13.10, 26.0.13.4, 27.1.10, 28.0.6 or 29.0.1.

🎖@cveNotify

🚨 CVE-2024-52523
Nextcloud Server is a self hosted personal cloud system. After setting up a user or administrator defined external storage with fixed credentials, the API returns them and adds them into the frontend again, allowing to read them in plain text when an attacker already has access to an active session of a user. It is recommended that the Nextcloud Server is upgraded to 28.0.12, 29.0.9 or 30.0.2 and Nextcloud Enterprise Server is upgraded to 25.0.13.14, 26.0.13.10, 27.1.11.10, 28.0.12, 29.0.9 or 30.0.2.

🎖@cveNotify

🚨 CVE-2024-11837
Improper Neutralization of Special Elements used in an N1QL Command ('N1QL Injection') vulnerability in PlexTrac  allows N1QL Injection.This issue affects PlexTrac: from 1.61.3 before 2.8.1.

🎖@cveNotify

🚨 CVE-2024-26581
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nft_set_rbtree: skip end interval element from gc

rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.

🎖@cveNotify

🚨 CVE-2023-52442
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: validate session id and tree id in compound request

`smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session()
will always return the first request smb2 header in a compound request.
if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will
return 0, i.e. The tree id check is skipped.
This patch use ksmbd_req_buf_next() to get current command in compound.

🎖@cveNotify

🚨 CVE-2025-21966
In the Linux kernel, the following vulnerability has been resolved:

dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature

Fix memory corruption due to incorrect parameter being passed to bio_init

🎖@cveNotify

🚨 CVE-2025-21995
In the Linux kernel, the following vulnerability has been resolved:

drm/sched: Fix fence reference count leak

The last_scheduled fence leaks when an entity is being killed and adding
the cleanup callback fails.

Decrement the reference count of prev when dma_fence_add_callback()
fails, ensuring proper balance.

[phasta: add git tag info for stable kernel]

🎖@cveNotify

🚨 CVE-2025-21996
In the Linux kernel, the following vulnerability has been resolved:

drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()

On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.

Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

(cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)

🎖@cveNotify

🚨 CVE-2025-22011
In the Linux kernel, the following vulnerability has been resolved:

ARM: dts: bcm2711: Fix xHCI power-domain

During s2idle tests on the Raspberry CM4 the VPU firmware always crashes
on xHCI power-domain resume:

root@raspberrypi:/sys/power# echo freeze > state
[ 70.724347] xhci_suspend finished
[ 70.727730] xhci_plat_suspend finished
[ 70.755624] bcm2835-power bcm2835-power: Power grafx off
[ 70.761127] USB: Set power to 0

[ 74.653040] USB: Failed to set power to 1 (-110)

This seems to be caused because of the mixed usage of
raspberrypi-power and bcm2835-power at the same time. So avoid
the usage of the VPU firmware power-domain driver, which
prevents the VPU crash.

🎖@cveNotify

🚨 CVE-2025-43012
In JetBrains Toolbox App before 2.6 command injection in SSH plugin was possible

🎖@cveNotify