🚨 CVE-2025-11019
A vulnerability has been found in Total.js CMS up to 19.9.0. This impacts an unknown function of the component Files Menu. The manipulation leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

🎖@cveNotify

🚨 CVE-2025-11026
A vulnerability was determined in givanz Vvveb up to 1.0.7.2. Affected by this vulnerability is an unknown functionality of the component Configuration File Handler. This manipulation causes information disclosure. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Once again the project maintainer reacted very professional: "I accept the existence of these vulnerabilities. (...) I fixed the code to remove these vulnerabilities and will push the code to github and make a new release."

🎖@cveNotify

🚨 CVE-2025-36274
IBM Aspera HTTP Gateway 2.0.0 through 2.3.1 stores sensitive information in clear text in easily obtainable files which can be read by an unauthenticated user.

🎖@cveNotify

🚨 CVE-2025-36326
IBM Cognos Controller 11.0.0 through 11.0.1, and IBM Controller 11.1.0 through 11.1.1 could allow an attacker to obtain sensitive information due to the use of hardcoded cryptographic keys for signing session cookies.

🎖@cveNotify

🚨 CVE-2024-35810
In the Linux kernel, the following vulnerability has been resolved:

drm/vmwgfx: Fix the lifetime of the bo cursor memory

The cleanup can be dispatched while the atomic update is still active,
which means that the memory acquired in the atomic update needs to
not be invalidated by the cleanup. The buffer objects in vmw_plane_state
instead of using the builtin map_and_cache were trying to handle
the lifetime of the mapped memory themselves, leading to crashes.

Use the map_and_cache instead of trying to manage the lifetime of the
buffer objects held by the vmw_plane_state.

Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo.

🎖@cveNotify

🚨 CVE-2024-42105
In the Linux kernel, the following vulnerability has been resolved:

nilfs2: fix inode number range checks

Patch series "nilfs2: fix potential issues related to reserved inodes".

This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.


This patch (of 3):

In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.

As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.

In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.

Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.

Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.

🎖@cveNotify

🚨 CVE-2024-4308
SQL injection vulnerability in HubBank affecting version 1.0.2. This vulnerability could allow an attacker to send a specially crafted SQL query to the database through different endpoints (/admin/view_users.php?id=1,/admin/viewloan-trans.php?id=1,/admin/view-deposit.php?id=1,/admin/view-domtrans.php?id=1, /admin/delete_cards.php?id=1,/admin/view_cards.php?id=1 and /admin/view_users.php?id=1, id parameter) and retrieve the information stored in the database.

🎖@cveNotify

🚨 CVE-2024-27418
In the Linux kernel, the following vulnerability has been resolved:

net: mctp: take ownership of skb in mctp_local_output

Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.

Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.

🎖@cveNotify

🚨 CVE-2024-27432
In the Linux kernel, the following vulnerability has been resolved:

net: ethernet: mtk_eth_soc: fix PPE hanging issue

A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.

Without this patch, the PPE may experience a hang during the reboot test.

🎖@cveNotify

🚨 CVE-2024-27434
In the Linux kernel, the following vulnerability has been resolved:

wifi: iwlwifi: mvm: don't set the MFP flag for the GTK

The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.

🎖@cveNotify

🚨 CVE-2024-35787
In the Linux kernel, the following vulnerability has been resolved:

md/md-bitmap: fix incorrect usage for sb_index

Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the
bitmap file") removed page->index from bitmap code, but left wrong code
logic for clustered-md. current code never set slot offset for cluster
nodes, will sometimes cause crash in clustered env.

Call trace (partly):
md_bitmap_file_set_bit+0x110/0x1d8 [md_mod]
md_bitmap_startwrite+0x13c/0x240 [md_mod]
raid1_make_request+0x6b0/0x1c08 [raid1]
md_handle_request+0x1dc/0x368 [md_mod]
md_submit_bio+0x80/0xf8 [md_mod]
__submit_bio+0x178/0x300
submit_bio_noacct_nocheck+0x11c/0x338
submit_bio_noacct+0x134/0x614
submit_bio+0x28/0xdc
submit_bh_wbc+0x130/0x1cc
submit_bh+0x1c/0x28

🎖@cveNotify

🚨 CVE-2024-35793
In the Linux kernel, the following vulnerability has been resolved:

debugfs: fix wait/cancellation handling during remove

Ben Greear further reports deadlocks during concurrent debugfs
remove while files are being accessed, even though the code in
question now uses debugfs cancellations. Turns out that despite
all the review on the locking, we missed completely that the
logic is wrong: if the refcount hits zero we can finish (and
need not wait for the completion), but if it doesn't we have
to trigger all the cancellations. As written, we can _never_
get into the loop triggering the cancellations. Fix this, and
explain it better while at it.

🎖@cveNotify

🚨 CVE-2024-25100
Deserialization of Untrusted Data vulnerability in WP Swings Coupon Referral Program allows Object Injection.This issue affects Coupon Referral Program: from n/a before 1.8.4.

🎖@cveNotify

🚨 CVE-2023-52834
In the Linux kernel, the following vulnerability has been resolved:

atl1c: Work around the DMA RX overflow issue

This is based on alx driver commit 881d0327db37 ("net: alx: Work around
the DMA RX overflow issue").

The alx and atl1c drivers had RX overflow error which was why a custom
allocator was created to avoid certain addresses. The simpler workaround
then created for alx driver, but not for atl1c due to lack of tester.

Instead of using a custom allocator, check the allocated skb address and
use skb_reserve() to move away from problematic 0x...fc0 address.

Tested on AR8131 on Acer 4540.

🎖@cveNotify

🚨 CVE-2024-27411
In the Linux kernel, the following vulnerability has been resolved:

drm/nouveau: keep DMA buffers required for suspend/resume

Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.

This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init.

🎖@cveNotify

🚨 CVE-2024-27415
In the Linux kernel, the following vulnerability has been resolved:

netfilter: bridge: confirm multicast packets before passing them up the stack

conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.

Example:
macvlan0
|
br0
/ \
ethX ethY

ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.

1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
-> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
and schedules a work queue to send them out on the lower devices.

The clone skb->_nfct is not a copy, it is the same entry as the
original skb. The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.

The Macvlan broadcast worker and normal confirm path will race.

This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table). This works fine.

But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.

Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.

This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.

Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.

The downside is that this disables NAT and conntrack helpers.

Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:

-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5

For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.

Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.

🎖@cveNotify

🚨 CVE-2023-52791
In the Linux kernel, the following vulnerability has been resolved:

i2c: core: Run atomic i2c xfer when !preemptible

Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).

panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:

[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[ 12.676926] Voluntary context switch within RCU read-side critical section!
...
[ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114
[ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58
[ 13.001050] machine_restart from panic+0x2a8/0x32c

Use !preemptible() instead, which is basically the same check as
pre-v5.2.

🎖@cveNotify

🚨 CVE-2024-0446
A maliciously crafted STP, CATPART or MODEL file, when parsed in ASMKERN228A.dll and ASMdatax229A.dll through Autodesk AutoCAD, may force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2024-23120
A maliciously crafted STP and STEP file, when parsed in ASMIMPORT228A.dll and ASMIMPORT229A.dll through Autodesk AutoCAD, may force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2024-23121
A maliciously crafted MODEL file, when parsed in libodxdll.dll through Autodesk AutoCAD, may force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

🎖@cveNotify

🚨 CVE-2024-23122
A maliciously crafted 3DM file, when parsed in opennurbs.dll through Autodesk AutoCAD, may force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

🎖@cveNotify