🚨 CVE-2025-50952
openjpeg v 2.5.0 was discovered to contain a NULL pointer dereference via the component /openjp2/dwt.c.
🎖@cveNotify
openjpeg v 2.5.0 was discovered to contain a NULL pointer dereference via the component /openjp2/dwt.c.
🎖@cveNotify
GitHub
Exist a null pointer dereference issue in file src/lib/openjp2/dwt.c:2124 · Issue #1505 · uclouvain/openjpeg
Expected behavior and actual behavior. Hi, I found a runtime error: applying zero offset to null pointer in current master, and I also reproduced it on latest released version 2.5.0. Steps to repro...
🚨 CVE-2024-56339
IBM WebSphere Application Server 9.0 and WebSphere Application Server Liberty 17.0.0.3 through 25.0.0.7 could allow a remote attacker to bypass security restrictions caused by a failure to honor security configuration.
🎖@cveNotify
IBM WebSphere Application Server 9.0 and WebSphere Application Server Liberty 17.0.0.3 through 25.0.0.7 could allow a remote attacker to bypass security restrictions caused by a failure to honor security configuration.
🎖@cveNotify
Ibm
Security Bulletin: IBM WebSphere Application Server and WebSphere Application Server Liberty are affected by a security bypass…
IBM WebSphere Application Server and Webphere Application Server Liberty are affected by a security bypass caused by a failure to honor security configuration.
🚨 CVE-2025-44779
An issue in Ollama v0.1.33 allows attackers to delete arbitrary files via sending a crafted packet to the endpoint /api/pull.
🎖@cveNotify
An issue in Ollama v0.1.33 allows attackers to delete arbitrary files via sending a crafted packet to the endpoint /api/pull.
🎖@cveNotify
🚨 CVE-2025-7054
Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers.
An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5.
🎖@cveNotify
Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers.
An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5.
🎖@cveNotify
GitHub
Infinite loop triggered by connection ID retirement
## Impact
Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection ident...
Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection ident...
🚨 CVE-2025-8964
A vulnerability was identified in code-projects Hostel Management System 1.0. This affects an unknown part of the file hostel_manage.exe of the component Login. The manipulation leads to improper authentication. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
A vulnerability was identified in code-projects Hostel Management System 1.0. This affects an unknown part of the file hostel_manage.exe of the component Login. The manipulation leads to improper authentication. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
🚨 CVE-2025-54389
AIDE is an advanced intrusion detection environment. Prior to version 0.19.2, there is an improper output neutralization vulnerability in AIDE. An attacker can craft a malicious filename by including terminal escape sequences to hide the addition or removal of the file from the report and/or tamper with the log output. A local user might exploit this to bypass the AIDE detection of malicious files. Additionally the output of extended attribute key names and symbolic links targets are also not properly neutralized. This issue has been patched in version 0.19.2. A workaround involves configuring AIDE to write the report output to a regular file, redirecting stdout to a regular file, or redirecting the log output written to stderr to a regular file.
🎖@cveNotify
AIDE is an advanced intrusion detection environment. Prior to version 0.19.2, there is an improper output neutralization vulnerability in AIDE. An attacker can craft a malicious filename by including terminal escape sequences to hide the addition or removal of the file from the report and/or tamper with the log output. A local user might exploit this to bypass the AIDE detection of malicious files. Additionally the output of extended attribute key names and symbolic links targets are also not properly neutralized. This issue has been patched in version 0.19.2. A workaround involves configuring AIDE to write the report output to a regular file, redirecting stdout to a regular file, or redirecting the log output written to stderr to a regular file.
🎖@cveNotify
GitHub
Escape control characters in report and log output · aide/aide@64c8f32
* this addresses CVE-2025-54389
* thanks to Rajesh Pangare for reporting this issue
* thanks to Rajesh Pangare for reporting this issue
🚨 CVE-2025-6485
A vulnerability was found in TOTOLINK A3002R 1.1.1-B20200824.0128. It has been classified as critical. This affects the function formWlSiteSurvey of the file /boafrm/formWlSiteSurvey. The manipulation of the argument wlanif leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
A vulnerability was found in TOTOLINK A3002R 1.1.1-B20200824.0128. It has been classified as critical. This affects the function formWlSiteSurvey of the file /boafrm/formWlSiteSurvey. The manipulation of the argument wlanif leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
GitHub
my_vuln/totolink3/vuln_34/34.md at main · wudipjq/my_vuln
Contribute to wudipjq/my_vuln development by creating an account on GitHub.
🚨 CVE-2025-49321
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Arraytics Eventin allows Reflected XSS. This issue affects Eventin: from n/a through 4.0.28.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Arraytics Eventin allows Reflected XSS. This issue affects Eventin: from n/a through 4.0.28.
🎖@cveNotify
Patchstack
WordPress Eventin plugin <= 4.0.28 - Cross Site Scripting (XSS) Vulnerability - Patchstack
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2025-36582
Dell NetWorker, versions 19.12.0.1 and prior, contains a Selection of Less-Secure Algorithm During Negotiation ('Algorithm Downgrade') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.
🎖@cveNotify
Dell NetWorker, versions 19.12.0.1 and prior, contains a Selection of Less-Secure Algorithm During Negotiation ('Algorithm Downgrade') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.
🎖@cveNotify
🚨 CVE-2025-45872
zrlog v3.1.5 was discovered to contain a Server-Side Request Forgery (SSRF) via the downloadUrl parameter.
🎖@cveNotify
zrlog v3.1.5 was discovered to contain a Server-Side Request Forgery (SSRF) via the downloadUrl parameter.
🎖@cveNotify
GitHub
cve/ZrLog Blog System SSRF + File Overwrite Leading to RCE Vulnerability.md at main · dengxmenglihua/cve
Contribute to dengxmenglihua/cve development by creating an account on GitHub.
🚨 CVE-2025-53632
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. When decoding a scenario (i.e. a zip archive), the path of the file to write is not checked, potentially leading to zip slips. Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 47d188f and shipped in v0.1.4.
🎖@cveNotify
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. When decoding a scenario (i.e. a zip archive), the path of the file to write is not checked, potentially leading to zip slips. Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 47d188f and shipped in v0.1.4.
🎖@cveNotify
GitHub
fix: zip slip on scenario unzipping · ctfer-io/chall-manager@47d188f
See securego/gosec#324
🚨 CVE-2025-53633
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. When decoding a scenario (i.e. a zip archive), the size of the decoded content is not checked, potentially leading to zip bombs decompression. Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 14042aa and shipped in v0.1.4.
🎖@cveNotify
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. When decoding a scenario (i.e. a zip archive), the size of the decoded content is not checked, potentially leading to zip bombs decompression. Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 14042aa and shipped in v0.1.4.
🎖@cveNotify
GitHub
impr: handle archive size on unzip to avoid zip bombing (DoS) · ctfer-io/chall-manager@14042aa
Challenge Instances on Demand, anywhere at any time - impr: handle archive size on unzip to avoid zip bombing (DoS) · ctfer-io/chall-manager@14042aa
🚨 CVE-2025-53634
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. The HTTP Gateway processes headers, but with no timeout set. With a slow loris attack, an attacker could cause Denial of Service (DoS). Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 1385bd8 and shipped in v0.1.4.
🎖@cveNotify
Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. The HTTP Gateway processes headers, but with no timeout set. With a slow loris attack, an attacker could cause Denial of Service (DoS). Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 1385bd8 and shipped in v0.1.4.
🎖@cveNotify
GitHub
fix: potential slowloris attack on http server header reading · ctfer-io/chall-manager@1385bd8
Challenge Instances on Demand, anywhere at any time - fix: potential slowloris attack on http server header reading · ctfer-io/chall-manager@1385bd8
🚨 CVE-2025-53643
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.12.14, the Python parser is vulnerable to a request smuggling vulnerability due to not parsing trailer sections of an HTTP request. If a pure Python version of aiohttp is installed (i.e. without the usual C extensions) or AIOHTTP_NO_EXTENSIONS is enabled, then an attacker may be able to execute a request smuggling attack to bypass certain firewalls or proxy protections. Version 3.12.14 contains a patch for this issue.
🎖@cveNotify
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.12.14, the Python parser is vulnerable to a request smuggling vulnerability due to not parsing trailer sections of an HTTP request. If a pure Python version of aiohttp is installed (i.e. without the usual C extensions) or AIOHTTP_NO_EXTENSIONS is enabled, then an attacker may be able to execute a request smuggling attack to bypass certain firewalls or proxy protections. Version 3.12.14 contains a patch for this issue.
🎖@cveNotify
GitHub
Add trailer parsing logic (#11269) (#11287) · aio-libs/aiohttp@e8d774f
(cherry picked from commit 7dd4b5535e6bf9c2d2f05fde638517bff065ba74)
🚨 CVE-2025-53925
Emlog is an open source website building system. A cross-site scripting (XSS) vulnerability in emlog up to and including pro-2.5.17 allows authenticated remote attackers to inject arbitrary web script or HTML via the file upload functionality. As an authenticated user it is possible to upload an .svg file that contains JavaScript code that is later executed. As of time of publication, no known patched versions exist.
🎖@cveNotify
Emlog is an open source website building system. A cross-site scripting (XSS) vulnerability in emlog up to and including pro-2.5.17 allows authenticated remote attackers to inject arbitrary web script or HTML via the file upload functionality. As an authenticated user it is possible to upload an .svg file that contains JavaScript code that is later executed. As of time of publication, no known patched versions exist.
🎖@cveNotify
GitHub
Stored XSS in file upload functionality in emlog CMS
### Summary
Cross-site scripting (XSS) vulnerability in emlog before the pro-2.5.17 allows authenticated remote attackers to inject arbitrary web script or HTML via the file upload functionality. ...
Cross-site scripting (XSS) vulnerability in emlog before the pro-2.5.17 allows authenticated remote attackers to inject arbitrary web script or HTML via the file upload functionality. ...
🚨 CVE-2025-53926
Emlog is an open source website building system. A cross-site scripting (XSS) vulnerability in emlog up to and including pro-2.5.17 allows remote attackers to inject arbitrary web script or HTML via the comment and comname parameters. Reflected XSS requires the victim to send POST requests, therefore the victim must be persuaded into clicking into sent URL. As of time of publication, no known patched versions exist.
🎖@cveNotify
Emlog is an open source website building system. A cross-site scripting (XSS) vulnerability in emlog up to and including pro-2.5.17 allows remote attackers to inject arbitrary web script or HTML via the comment and comname parameters. Reflected XSS requires the victim to send POST requests, therefore the victim must be persuaded into clicking into sent URL. As of time of publication, no known patched versions exist.
🎖@cveNotify
GitHub
Reflected XSS due to error in emlog CMS
### Summary
Cross-site scripting (XSS) vulnerability in emlog before the pro-2.5.17 allows remote attackers to inject arbitrary web script or HTML via the comment and comname parameters.
### D...
Cross-site scripting (XSS) vulnerability in emlog before the pro-2.5.17 allows remote attackers to inject arbitrary web script or HTML via the comment and comname parameters.
### D...
🚨 CVE-2025-52327
SQL Injection vulnerability in Restaurant Order System 1.0 allows a local attacker to obtain sensitive information via the payment.php file
🎖@cveNotify
SQL Injection vulnerability in Restaurant Order System 1.0 allows a local attacker to obtain sensitive information via the payment.php file
🎖@cveNotify
Restaurant
Browse The Best Restaurants & Deals Near Amsterdam
Discover the largest selection of restaurants and 185,000+ deals near amsterdam. Save big every time you dine with Restaurant.com!
🚨 CVE-2021-20087
Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution') in jquery-deparam 0.5.1 allows a malicious user to inject properties into Object.prototype.
🎖@cveNotify
Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution') in jquery-deparam 0.5.1 allows a malicious user to inject properties into Object.prototype.
🎖@cveNotify
GitHub
client-side-prototype-pollution/pp/jquery-deparam.md at master · BlackFan/client-side-prototype-pollution
Prototype Pollution and useful Script Gadgets. Contribute to BlackFan/client-side-prototype-pollution development by creating an account on GitHub.
🚨 CVE-2024-57329
HortusFox v3.9 contains a stored XSS vulnerability in the "Add Plant" function. The name input field does not sanitize or escape user inputs, allowing attackers to inject and execute arbitrary JavaScript payloads.
🎖@cveNotify
HortusFox v3.9 contains a stored XSS vulnerability in the "Add Plant" function. The name input field does not sanitize or escape user inputs, allowing attackers to inject and execute arbitrary JavaScript payloads.
🎖@cveNotify
GitHub
CVEs/CVE-2024-57329 at main · fatihtuzunn/CVEs
Contribute to fatihtuzunn/CVEs development by creating an account on GitHub.
🚨 CVE-2024-54951
Monica 4.1.2 is vulnerable to Cross Site Scripting (XSS). A malicious user can create a malformed contact and use that contact in the "HOW YOU MET" customization options to trigger the XSS.
🎖@cveNotify
Monica 4.1.2 is vulnerable to Cross Site Scripting (XSS). A malicious user can create a malformed contact and use that contact in the "HOW YOU MET" customization options to trigger the XSS.
🎖@cveNotify
GitHub
GitHub - Allevon412/CVE-2024-54951: I contacted the monica development team via email on 11/20/2024. I also contacted them via…
I contacted the monica development team via email on 11/20/2024. I also contacted them via LinkedIn, and other platforms in the weeks that followed. Publishing here since there was no response. - A...
🚨 CVE-2025-21756
In the Linux kernel, the following vulnerability has been resolved:
vsock: Keep the binding until socket destruction
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
vsock: Keep the binding until socket destruction
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
🎖@cveNotify