π¨ CVE-2020-1938
When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
π@cveNotify
When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
π@cveNotify
π¨ CVE-2020-9497
Apache Guacamole 1.1.0 and older do not properly validate datareceived from RDP servers via static virtual channels. If a userconnects to a malicious or compromised RDP server, specially-craftedPDUs could result in disclosure of information within the memory ofthe guacd process handling the connection.
π@cveNotify
Apache Guacamole 1.1.0 and older do not properly validate datareceived from RDP servers via static virtual channels. If a userconnects to a malicious or compromised RDP server, specially-craftedPDUs could result in disclosure of information within the memory ofthe guacd process handling the connection.
π@cveNotify
π¨ CVE-2020-9498
Apache Guacamole 1.1.0 and older may mishandle pointers involved inprocessing data received via RDP static virtual channels. If a userconnects to a malicious or compromised RDP server, a series ofspecially-crafted PDUs could result in memory corruption, possiblyallowing arbitrary code to be executed with the privileges of therunning guacd process.
π@cveNotify
Apache Guacamole 1.1.0 and older may mishandle pointers involved inprocessing data received via RDP static virtual channels. If a userconnects to a malicious or compromised RDP server, a series ofspecially-crafted PDUs could result in memory corruption, possiblyallowing arbitrary code to be executed with the privileges of therunning guacd process.
π@cveNotify
π¨ CVE-2017-5638
The Jakarta Multipart parser in Apache Struts 2 2.3.x before 2.3.32 and 2.5.x before 2.5.10.1 has incorrect exception handling and error-message generation during file-upload attempts, which allows remote attackers to execute arbitrary commands via a crafted Content-Type, Content-Disposition, or Content-Length HTTP header, as exploited in the wild in March 2017 with a Content-Type header containing a #cmd= string.
π@cveNotify
The Jakarta Multipart parser in Apache Struts 2 2.3.x before 2.3.32 and 2.5.x before 2.5.10.1 has incorrect exception handling and error-message generation during file-upload attempts, which allows remote attackers to execute arbitrary commands via a crafted Content-Type, Content-Disposition, or Content-Length HTTP header, as exploited in the wild in March 2017 with a Content-Type header containing a #cmd= string.
π@cveNotify
Cisco Talos
Content-Type: Malicious - New Apache Struts2 0-day Under Attack
UPDATE: It was recently disclosed that in addition to Content-Type being vulnerable, both Content-Disposition and Content-Length can be manipulated to trigger this particular vulnerability. No new CVE was listed, however details of the vulnerability and remediationβ¦
π¨ CVE-2020-25649
A flaw was found in FasterXML Jackson Databind, where it did not have entity expansion secured properly. This flaw allows vulnerability to XML external entity (XXE) attacks. The highest threat from this vulnerability is data integrity.
π@cveNotify
A flaw was found in FasterXML Jackson Databind, where it did not have entity expansion secured properly. This flaw allows vulnerability to XML external entity (XXE) attacks. The highest threat from this vulnerability is data integrity.
π@cveNotify
π¨ CVE-2020-11974
In DolphinScheduler 1.2.0 and 1.2.1, with mysql connectorj a remote code execution vulnerability exists when choosing mysql as database.
π@cveNotify
In DolphinScheduler 1.2.0 and 1.2.1, with mysql connectorj a remote code execution vulnerability exists when choosing mysql as database.
π@cveNotify
π¨ CVE-2020-17518
Apache Flink 1.5.1 introduced a REST handler that allows you to write an uploaded file to an arbitrary location on the local file system, through a maliciously modified HTTP HEADER. The files can be written to any location accessible by Flink 1.5.1. All users should upgrade to Flink 1.11.3 or 1.12.0 if their Flink instance(s) are exposed. The issue was fixed in commit a5264a6f41524afe8ceadf1d8ddc8c80f323ebc4 from apache/flink:master.
π@cveNotify
Apache Flink 1.5.1 introduced a REST handler that allows you to write an uploaded file to an arbitrary location on the local file system, through a maliciously modified HTTP HEADER. The files can be written to any location accessible by Flink 1.5.1. All users should upgrade to Flink 1.11.3 or 1.12.0 if their Flink instance(s) are exposed. The issue was fixed in commit a5264a6f41524afe8ceadf1d8ddc8c80f323ebc4 from apache/flink:master.
π@cveNotify
π¨ CVE-2020-17519
A change introduced in Apache Flink 1.11.0 (and released in 1.11.1 and 1.11.2 as well) allows attackers to read any file on the local filesystem of the JobManager through the REST interface of the JobManager process. Access is restricted to files accessible by the JobManager process. All users should upgrade to Flink 1.11.3 or 1.12.0 if their Flink instance(s) are exposed. The issue was fixed in commit b561010b0ee741543c3953306037f00d7a9f0801 from apache/flink:master.
π@cveNotify
A change introduced in Apache Flink 1.11.0 (and released in 1.11.1 and 1.11.2 as well) allows attackers to read any file on the local filesystem of the JobManager through the REST interface of the JobManager process. Access is restricted to files accessible by the JobManager process. All users should upgrade to Flink 1.11.3 or 1.12.0 if their Flink instance(s) are exposed. The issue was fixed in commit b561010b0ee741543c3953306037f00d7a9f0801 from apache/flink:master.
π@cveNotify
packetstorm.news
Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories, and Whitepapers
π¨ CVE-2021-22978
On BIG-IP version 16.0.x before 16.0.1, 15.1.x before 15.1.1, 14.1.x before 14.1.3.1, 13.1.x before 13.1.3.5, and all 12.1.x and 11.6.x versions, undisclosed endpoints in iControl REST allow for a reflected XSS attack, which could lead to a complete compromise of BIG-IP if the victim user is granted the admin role. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
π@cveNotify
On BIG-IP version 16.0.x before 16.0.1, 15.1.x before 15.1.1, 14.1.x before 14.1.3.1, 13.1.x before 13.1.3.5, and all 12.1.x and 11.6.x versions, undisclosed endpoints in iControl REST allow for a reflected XSS attack, which could lead to a complete compromise of BIG-IP if the victim user is granted the admin role. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
π@cveNotify
π¨ CVE-2021-22985
On BIG-IP APM version 16.0.x before 16.0.1.1, under certain conditions, when processing VPN traffic with APM, TMM consumes excessive memory. A malicious, authenticated VPN user may abuse this to perform a DoS attack against the APM. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
π@cveNotify
On BIG-IP APM version 16.0.x before 16.0.1.1, under certain conditions, when processing VPN traffic with APM, TMM consumes excessive memory. A malicious, authenticated VPN user may abuse this to perform a DoS attack against the APM. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
π@cveNotify
π¨ CVE-2021-1412
Multiple vulnerabilities in the Admin portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information. These vulnerabilities are due to improper enforcement of administrator privilege levels for sensitive data. An attacker with read-only administrator access to the Admin portal could exploit these vulnerabilities by browsing to one of the pages that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system. For more information about these vulnerabilities, see the Details section of this advisory.
π@cveNotify
Multiple vulnerabilities in the Admin portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information. These vulnerabilities are due to improper enforcement of administrator privilege levels for sensitive data. An attacker with read-only administrator access to the Admin portal could exploit these vulnerabilities by browsing to one of the pages that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system. For more information about these vulnerabilities, see the Details section of this advisory.
π@cveNotify
Cisco
Cisco Security Advisory: Cisco Identity Services Engine Sensitive Information Disclosure Vulnerabilities
Multiple vulnerabilities in the Admin portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information.
These vulnerabilities are due to improper enforcement of administrator privilege levels forβ¦
These vulnerabilities are due to improper enforcement of administrator privilege levels forβ¦
π¨ CVE-2020-25682
A flaw was found in dnsmasq before 2.83. A buffer overflow vulnerability was discovered in the way dnsmasq extract names from DNS packets before validating them with DNSSEC data. An attacker on the network, who can create valid DNS replies, could use this flaw to cause an overflow with arbitrary data in a heap-allocated memory, possibly executing code on the machine. The flaw is in the rfc1035.c:extract_name() function, which writes data to the memory pointed by name assuming MAXDNAME*2 bytes are available in the buffer. However, in some code execution paths, it is possible extract_name() gets passed an offset from the base buffer, thus reducing, in practice, the number of available bytes that can be written in the buffer. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
π@cveNotify
A flaw was found in dnsmasq before 2.83. A buffer overflow vulnerability was discovered in the way dnsmasq extract names from DNS packets before validating them with DNSSEC data. An attacker on the network, who can create valid DNS replies, could use this flaw to cause an overflow with arbitrary data in a heap-allocated memory, possibly executing code on the machine. The flaw is in the rfc1035.c:extract_name() function, which writes data to the memory pointed by name assuming MAXDNAME*2 bytes are available in the buffer. However, in some code execution paths, it is possible extract_name() gets passed an offset from the base buffer, thus reducing, in practice, the number of available bytes that can be written in the buffer. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
π@cveNotify
π¨ CVE-2020-36245
GramAddict through 1.2.3 allows remote attackers to execute arbitrary code because of use of UIAutomator2 and ATX-Agent. The attacker must be able to reach TCP port 7912, e.g., by being on the same Wi-Fi network.
π@cveNotify
GramAddict through 1.2.3 allows remote attackers to execute arbitrary code because of use of UIAutomator2 and ATX-Agent. The attacker must be able to reach TCP port 7912, e.g., by being on the same Wi-Fi network.
π@cveNotify
GitHub
UIAutomator2 lets anyone on the network control/view your device! Β· Issue #134 Β· GramAddict/bot
I discovered something very concerning just now. When using uiautomator2, which is what GramAddict is based around, it silently installs the application ATX-Agent on your device, which opens a webs...
π¨ CVE-2020-12702
Weak encryption in the Quick Pairing mode in the eWeLink mobile application (Android application V4.9.2 and earlier, iOS application V4.9.1 and earlier) allows physically proximate attackers to eavesdrop on Wi-Fi credentials and other sensitive information by monitoring the Wi-Fi spectrum during the pairing process.
π@cveNotify
Weak encryption in the Quick Pairing mode in the eWeLink mobile application (Android application V4.9.2 and earlier, iOS application V4.9.1 and earlier) allows physically proximate attackers to eavesdrop on Wi-Fi credentials and other sensitive information by monitoring the Wi-Fi spectrum during the pairing process.
π@cveNotify
π¨ CVE-2021-27375
Traefik before 2.4.5 allows the loading of IFRAME elements from other domains.
π@cveNotify
Traefik before 2.4.5 allows the loading of IFRAME elements from other domains.
π@cveNotify
GitHub
Only allow iframes to be loaded from our domain by SantoDE Β· Pull Request #7904 Β· traefik/traefik
What does this PR do?
Only allows iframes to be loaded from our domain
Motivation
Be more secure :)
More
Added/updated tests
Added/updated documentation
Additional Notes
Only allows iframes to be loaded from our domain
Motivation
Be more secure :)
More
Added/updated tests
Added/updated documentation
Additional Notes
π¨ CVE-2020-12878
Digi ConnectPort X2e before 3.2.30.6 allows an attacker to escalate privileges from the python user to root via a symlink attack that uses chown, related to /etc/init.d/S50dropbear.sh and the /WEB/python/.ssh directory.
π@cveNotify
Digi ConnectPort X2e before 3.2.30.6 allows an attacker to escalate privileges from the python user to root via a symlink attack that uses chown, related to /etc/init.d/S50dropbear.sh and the /WEB/python/.ssh directory.
π@cveNotify
GitHub
GitHub - mandiant/Vulnerability-Disclosures
Contribute to mandiant/Vulnerability-Disclosures development by creating an account on GitHub.
π¨ CVE-2021-3271
PressBooks 5.17.3 contains a cross-site scripting (XSS). Stored XSS can be submitted via the Book Info's Long Description Body, and all actions to open or preview the books page will result in the triggering the stored XSS.
π@cveNotify
PressBooks 5.17.3 contains a cross-site scripting (XSS). Stored XSS can be submitted via the Book Info's Long Description Body, and all actions to open or preview the books page will result in the triggering the stored XSS.
π@cveNotify
GitHub
GitHub - pressbooks/pressbooks: Open publishing. Open web. Open source.
Open publishing. Open web. Open source. Contribute to pressbooks/pressbooks development by creating an account on GitHub.
π¨ CVE-2021-27124
SQL injection in the expertise parameter in search_result.php in Doctor Appointment System v1.0 allows an authenticated patient user to dump the database credentials via a SQL injection attack.
π@cveNotify
SQL injection in the expertise parameter in search_result.php in Doctor Appointment System v1.0 allows an authenticated patient user to dump the database credentials via a SQL injection attack.
π@cveNotify
Packetstormsecurity
Doctor Appointment System 1.0 SQL Injection β Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories and Whitepapers
π¨ CVE-2021-27379
An issue was discovered in Xen through 4.11.x, allowing x86 Intel HVM guest OS users to achieve unintended read/write DMA access, and possibly cause a denial of service (host OS crash) or gain privileges. This occurs because a backport missed a flush, and thus IOMMU updates were not always correct. NOTE: this issue exists because of an incomplete fix for CVE-2020-15565.
π@cveNotify
An issue was discovered in Xen through 4.11.x, allowing x86 Intel HVM guest OS users to achieve unintended read/write DMA access, and possibly cause a denial of service (host OS crash) or gain privileges. This occurs because a backport missed a flush, and thus IOMMU updates were not always correct. NOTE: this issue exists because of an incomplete fix for CVE-2020-15565.
π@cveNotify
π¨ CVE-2021-27645
The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.
π@cveNotify
The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.
π@cveNotify
π¨ CVE-2021-3355
A stored-self XSS exists in LightCMS v1.3.4, allowing an attacker to execute HTML or JavaScript code in a vulnerable Title field to /admin/SensitiveWords.
π@cveNotify
A stored-self XSS exists in LightCMS v1.3.4, allowing an attacker to execute HTML or JavaScript code in a vulnerable Title field to /admin/SensitiveWords.
π@cveNotify
GitHub
Stored XSS in "exclusive" field - SensitiveWords Β· Issue #18 Β· eddy8/LightCMS
Description - There's no escape being done before printing out the value of nounγverbγexclusive in the SensitiveWords page. LightCMS version - v1.3.4 Steps to reproduce - Navigate to http:/...