🚨 CVE-2018-17204
An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6, affecting parse_group_prop_ntr_selection_method in lib/ofp-util.c. When decoding a group mod, it validates the group type and command after the whole group mod has been decoded. The OF1.5 decoder, however, tries to use the type and command earlier, when it might still be invalid. This causes an assertion failure (via OVS_NOT_REACHED). ovs-vswitchd does not enable support for OpenFlow 1.5 by default.
🎖@cveNotify
An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6, affecting parse_group_prop_ntr_selection_method in lib/ofp-util.c. When decoding a group mod, it validates the group type and command after the whole group mod has been decoded. The OF1.5 decoder, however, tries to use the type and command earlier, when it might still be invalid. This causes an assertion failure (via OVS_NOT_REACHED). ovs-vswitchd does not enable support for OpenFlow 1.5 by default.
🎖@cveNotify
🚨 CVE-2015-8011
Buffer overflow in the lldp_decode function in daemon/protocols/lldp.c in lldpd before 0.8.0 allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via vectors involving large management addresses and TLV boundaries.
🎖@cveNotify
Buffer overflow in the lldp_decode function in daemon/protocols/lldp.c in lldpd before 0.8.0 allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via vectors involving large management addresses and TLV boundaries.
🎖@cveNotify
🚨 CVE-2017-9214
In Open vSwitch (OvS) 2.7.0, while parsing an OFPT_QUEUE_GET_CONFIG_REPLY type OFP 1.0 message, there is a buffer over-read that is caused by an unsigned integer underflow in the function `ofputil_pull_queue_get_config_reply10` in `lib/ofp-util.c`.
🎖@cveNotify
In Open vSwitch (OvS) 2.7.0, while parsing an OFPT_QUEUE_GET_CONFIG_REPLY type OFP 1.0 message, there is a buffer over-read that is caused by an unsigned integer underflow in the function `ofputil_pull_queue_get_config_reply10` in `lib/ofp-util.c`.
🎖@cveNotify
🚨 CVE-2020-35498
A vulnerability was found in openvswitch. A limitation in the implementation of userspace packet parsing can allow a malicious user to send a specially crafted packet causing the resulting megaflow in the kernel to be too wide, potentially causing a denial of service. The highest threat from this vulnerability is to system availability.
🎖@cveNotify
A vulnerability was found in openvswitch. A limitation in the implementation of userspace packet parsing can allow a malicious user to send a specially crafted packet causing the resulting megaflow in the kernel to be too wide, potentially causing a denial of service. The highest threat from this vulnerability is to system availability.
🎖@cveNotify
🚨 CVE-2020-7680
docsify prior to 4.11.4 is susceptible to Cross-site Scripting (XSS). Docsify.js uses fragment identifiers (parameters after # sign) to load resources from server-side .md files. Due to lack of validation here, it is possible to provide external URLs after the /#/ (domain.com/#//attacker.com) and render arbitrary JavaScript/HTML inside docsify page.
🎖@cveNotify
docsify prior to 4.11.4 is susceptible to Cross-site Scripting (XSS). Docsify.js uses fragment identifiers (parameters after # sign) to load resources from server-side .md files. Due to lack of validation here, it is possible to provide external URLs after the /#/ (domain.com/#//attacker.com) and render arbitrary JavaScript/HTML inside docsify page.
🎖@cveNotify
Packetstormsecurity
Docsify.js 4.11.4 Cross Site Scripting ≈ Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories and Whitepapers
🚨 CVE-2021-3177
Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.
🎖@cveNotify
Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.
🎖@cveNotify
🚨 CVE-2020-27218
In Eclipse Jetty version 9.4.0.RC0 to 9.4.34.v20201102, 10.0.0.alpha0 to 10.0.0.beta2, and 11.0.0.alpha0 to 11.0.0.beta2, if GZIP request body inflation is enabled and requests from different clients are multiplexed onto a single connection, and if an attacker can send a request with a body that is received entirely but not consumed by the application, then a subsequent request on the same connection will see that body prepended to its body. The attacker will not see any data but may inject data into the body of the subsequent request.
🎖@cveNotify
In Eclipse Jetty version 9.4.0.RC0 to 9.4.34.v20201102, 10.0.0.alpha0 to 10.0.0.beta2, and 11.0.0.alpha0 to 11.0.0.beta2, if GZIP request body inflation is enabled and requests from different clients are multiplexed onto a single connection, and if an attacker can send a request with a body that is received entirely but not consumed by the application, then a subsequent request on the same connection will see that body prepended to its body. The attacker will not see any data but may inject data into the body of the subsequent request.
🎖@cveNotify
🚨 CVE-2020-27216
In Eclipse Jetty versions 1.0 thru 9.4.32.v20200930, 10.0.0.alpha1 thru 10.0.0.beta2, and 11.0.0.alpha1 thru 11.0.0.beta2O, on Unix like systems, the system's temporary directory is shared between all users on that system. A collocated user can observe the process of creating a temporary sub directory in the shared temporary directory and race to complete the creation of the temporary subdirectory. If the attacker wins the race then they will have read and write permission to the subdirectory used to unpack web applications, including their WEB-INF/lib jar files and JSP files. If any code is ever executed out of this temporary directory, this can lead to a local privilege escalation vulnerability.
🎖@cveNotify
In Eclipse Jetty versions 1.0 thru 9.4.32.v20200930, 10.0.0.alpha1 thru 10.0.0.beta2, and 11.0.0.alpha1 thru 11.0.0.beta2O, on Unix like systems, the system's temporary directory is shared between all users on that system. A collocated user can observe the process of creating a temporary sub directory in the shared temporary directory and race to complete the creation of the temporary subdirectory. If the attacker wins the race then they will have read and write permission to the subdirectory used to unpack web applications, including their WEB-INF/lib jar files and JSP files. If any code is ever executed out of this temporary directory, this can lead to a local privilege escalation vulnerability.
🎖@cveNotify
🚨 CVE-2020-8625
BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch
🎖@cveNotify
BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch
🎖@cveNotify
🚨 CVE-2021-26544
Livy server version 0.7.0-incubating (only) is vulnerable to a cross site scripting issue in the session name. A malicious user could use this flaw to access logs and results of other users' sessions and run jobs with their privileges. This issue is fixed in Livy 0.7.1-incubating.
🎖@cveNotify
Livy server version 0.7.0-incubating (only) is vulnerable to a cross site scripting issue in the session name. A malicious user could use this flaw to access logs and results of other users' sessions and run jobs with their privileges. This issue is fixed in Livy 0.7.1-incubating.
🎖@cveNotify
🚨 CVE-2020-27216
In Eclipse Jetty versions 1.0 thru 9.4.32.v20200930, 10.0.0.alpha1 thru 10.0.0.beta2, and 11.0.0.alpha1 thru 11.0.0.beta2O, on Unix like systems, the system's temporary directory is shared between all users on that system. A collocated user can observe the process of creating a temporary sub directory in the shared temporary directory and race to complete the creation of the temporary subdirectory. If the attacker wins the race then they will have read and write permission to the subdirectory used to unpack web applications, including their WEB-INF/lib jar files and JSP files. If any code is ever executed out of this temporary directory, this can lead to a local privilege escalation vulnerability.
🎖@cveNotify
In Eclipse Jetty versions 1.0 thru 9.4.32.v20200930, 10.0.0.alpha1 thru 10.0.0.beta2, and 11.0.0.alpha1 thru 11.0.0.beta2O, on Unix like systems, the system's temporary directory is shared between all users on that system. A collocated user can observe the process of creating a temporary sub directory in the shared temporary directory and race to complete the creation of the temporary subdirectory. If the attacker wins the race then they will have read and write permission to the subdirectory used to unpack web applications, including their WEB-INF/lib jar files and JSP files. If any code is ever executed out of this temporary directory, this can lead to a local privilege escalation vulnerability.
🎖@cveNotify
🚨 CVE-2021-21148
Heap buffer overflow in V8 in Google Chrome prior to 88.0.4324.150 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.
🎖@cveNotify
Heap buffer overflow in V8 in Google Chrome prior to 88.0.4324.150 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.
🎖@cveNotify
Chrome Releases
Stable Channel Update for Desktop
The Stable channel has been updated to 88.0.4324.150 for Windows, Mac and Linux which will roll out over the coming days/weeks. A full list ...
🚨 CVE-2021-0326
In p2p_copy_client_info of p2p.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution if the target device is performing a Wi-Fi Direct search, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-8.1 Android-9Android ID: A-172937525
🎖@cveNotify
In p2p_copy_client_info of p2p.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution if the target device is performing a Wi-Fi Direct search, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-8.1 Android-9Android ID: A-172937525
🎖@cveNotify
🚨 CVE-2021-27212
In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.
🎖@cveNotify
In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.
🎖@cveNotify
🚨 CVE-2021-26716
Modules/input/Views/schedule.php in Emoncms through 10.2.7 allows XSS via the node parameter.
🎖@cveNotify
Modules/input/Views/schedule.php in Emoncms through 10.2.7 allows XSS via the node parameter.
🎖@cveNotify
GitHub
XSS Vulnerability · Issue #1652 · emoncms/emoncms
Hi, I have found a XSS in vulnerability in: emoncms/Modules/input/Views/schedule.php using the parameter 'node' Proof of concept exploit: http://127.0.0.1:9000/Modules/input/Views/s...
🚨 CVE-2021-27516
URI.js (aka urijs) before 1.19.6 mishandles certain uses of backslash such as http:\/ and interprets the URI as a relative path.
🎖@cveNotify
URI.js (aka urijs) before 1.19.6 mishandles certain uses of backslash such as http:\/ and interprets the URI as a relative path.
🎖@cveNotify
GitHub
fix(parse): treat backslash as forwardslash in scheme delimiter · medialize/URI.js@a1ad8bc
make `https:/\attacker.com` like `https:\/attacker.com` result in `https://attacker.com/`
🚨 CVE-2021-27515
url-parse before 1.5.0 mishandles certain uses of backslash such as http:\/ and interprets the URI as a relative path.
🎖@cveNotify
url-parse before 1.5.0 mishandles certain uses of backslash such as http:\/ and interprets the URI as a relative path.
🎖@cveNotify
GitHub
[security] More backslash fixes (#197) · unshiftio/url-parse@d1e7e88
Small footprint URL parser that works seamlessly across Node.js and browser environments. - unshiftio/url-parse
🚨 CVE-2021-27514
EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).
🎖@cveNotify
EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).
🎖@cveNotify
GitHub
ArianeBlow/exploit-eyesofnetwork5.3.10
Contribute to ArianeBlow/exploit-eyesofnetwork5.3.10 development by creating an account on GitHub.
🚨 CVE-2021-27513
The module admin_ITSM in EyesOfNetwork 5.3-10 allows remote authenticated users to upload arbitrary .xml.php files because it relies on "le filtre userside."
🎖@cveNotify
The module admin_ITSM in EyesOfNetwork 5.3-10 allows remote authenticated users to upload arbitrary .xml.php files because it relies on "le filtre userside."
🎖@cveNotify
GitHub
ArianeBlow/exploit-eyesofnetwork5.3.10
Contribute to ArianeBlow/exploit-eyesofnetwork5.3.10 development by creating an account on GitHub.
🚨 CVE-2020-35499
A NULL pointer dereference flaw in Linux kernel versions prior to 5.11 may be seen if sco_sock_getsockopt function in net/bluetooth/sco.c do not have a sanity check for a socket connection, when using BT_SNDMTU/BT_RCVMTU for SCO sockets. This could allow a local attacker with a special user privilege to crash the system (DOS) or leak kernel internal information.
🎖@cveNotify
A NULL pointer dereference flaw in Linux kernel versions prior to 5.11 may be seen if sco_sock_getsockopt function in net/bluetooth/sco.c do not have a sanity check for a socket connection, when using BT_SNDMTU/BT_RCVMTU for SCO sockets. This could allow a local attacker with a special user privilege to crash the system (DOS) or leak kernel internal information.
🎖@cveNotify
🚨 CVE-2020-12283
Sourcegraph before 3.15.1 has a vulnerable authentication workflow because of improper validation in the SafeRedirectURL method in cmd/frontend/auth/redirect.go, such as for the //foo//example.com substring.
🎖@cveNotify
Sourcegraph before 3.15.1 has a vulnerable authentication workflow because of improper validation in the SafeRedirectURL method in cmd/frontend/auth/redirect.go, such as for the //foo//example.com substring.
🎖@cveNotify