๐ข FAQ for MakerWorld Boost System
Our Boost System has been operational for a few days, and weโre actively gathering feedback to continually improve it and address any concerns. Below are some of the most common questions users have asked about our boost system, and weโll provide clear answers to each.
Q1: What is the difference between 'Boost Received' and the 'Boost Tokens' in our accounts?
* The 'Boost Token' you get is intended for you to boost models according to your preference. (labeled in blue)
* The 'Boosts Received' are the boosts you received from other users (labeled in red).
You can redeem your received boosts and convert them into points. 1 boost can be converted into 11 points, which is equivalent to \~1$ gift card pre-tax.
Q2: Will Boosts expire?
* 'Boosts Received' will not expire.
* 'Boost Tokens' will expire in 14 days from the date of receipt.
We've introduced this expiration date to encourage users to thoughtfully select models for boosting and to use their tokens promptly.
To accommodate the distribution of boost tokens, we have adjusted the incentive level of the previous download-based system. However, our intention was not to decrease the overall budget. The current decrease in incentives is primarily due to a small fraction of users using their boost tokens. So if you have boost tokens left in your account, show your appreciation by boosting your favorite designs!
We anticipate a transition period as users familiarize themselves with the boost system and begin actively supporting designers. Weโll closely monitor the impact on overall incentives and adjust accordingly to ensure a fair and sustainable system for all users.
Q3: Are only BambuLab printer users given Boost Tokens?
No. You can be given Boost Tokens even if you don't have a BambuLab printer.
To mitigate risks, initially, accounts associated with BambuLab printers will have a higher likelihood of receiving Boost Tokens. We'll further develop our Boost Token Delivery system to accurately allocate tokens to active users, minimizing the chance of distribution to potential bots or spam accounts.
Q4: Is it true that 1 boost = 1 dollar gift card?
The conversion rate given is pre-tax, so the actual amounts might differ depending on your local tax regulations. Our intention is to align the value of our boost to approximately $1. Upon receiving a boost, you can convert it for 11 MakerWorld points.
Hopefully, our responses are able to address some of your concerns, and we encourage more of you to use your boosts to reward your favorite models and designs! Please feel free to let us know if you have any further questions or encounter any issues regarding our Boost System in the comments below. Weโll do our best to address them as promptly as possible.
Thanks for your continued support!
The MakerWorld Team
Our Boost System has been operational for a few days, and weโre actively gathering feedback to continually improve it and address any concerns. Below are some of the most common questions users have asked about our boost system, and weโll provide clear answers to each.
Q1: What is the difference between 'Boost Received' and the 'Boost Tokens' in our accounts?
* The 'Boost Token' you get is intended for you to boost models according to your preference. (labeled in blue)
* The 'Boosts Received' are the boosts you received from other users (labeled in red).
You can redeem your received boosts and convert them into points. 1 boost can be converted into 11 points, which is equivalent to \~1$ gift card pre-tax.
Q2: Will Boosts expire?
* 'Boosts Received' will not expire.
* 'Boost Tokens' will expire in 14 days from the date of receipt.
We've introduced this expiration date to encourage users to thoughtfully select models for boosting and to use their tokens promptly.
To accommodate the distribution of boost tokens, we have adjusted the incentive level of the previous download-based system. However, our intention was not to decrease the overall budget. The current decrease in incentives is primarily due to a small fraction of users using their boost tokens. So if you have boost tokens left in your account, show your appreciation by boosting your favorite designs!
We anticipate a transition period as users familiarize themselves with the boost system and begin actively supporting designers. Weโll closely monitor the impact on overall incentives and adjust accordingly to ensure a fair and sustainable system for all users.
Q3: Are only BambuLab printer users given Boost Tokens?
No. You can be given Boost Tokens even if you don't have a BambuLab printer.
To mitigate risks, initially, accounts associated with BambuLab printers will have a higher likelihood of receiving Boost Tokens. We'll further develop our Boost Token Delivery system to accurately allocate tokens to active users, minimizing the chance of distribution to potential bots or spam accounts.
Q4: Is it true that 1 boost = 1 dollar gift card?
The conversion rate given is pre-tax, so the actual amounts might differ depending on your local tax regulations. Our intention is to align the value of our boost to approximately $1. Upon receiving a boost, you can convert it for 11 MakerWorld points.
Hopefully, our responses are able to address some of your concerns, and we encourage more of you to use your boosts to reward your favorite models and designs! Please feel free to let us know if you have any further questions or encounter any issues regarding our Boost System in the comments below. Weโll do our best to address them as promptly as possible.
Thanks for your continued support!
The MakerWorld Team
BambuLab pinned ยซ๐ข FAQ for MakerWorld Boost System Our Boost System has been operational for a few days, and weโre actively gathering feedback to continually improve it and address any concerns. Below are some of the most common questions users have asked about our boostโฆยป
๐น @Bambu Studio 1.9.1 Public Beta 4 is now available! ๐ช ๐ฏ ๐จ
We're happy to let everyone know that the Bambu Studio 1.9.1 Public Beta 4 is now available, bringing highly requested features like Multi-Device Management, Staggered Print Start, Color .obj Importing and a new CrossHatch infill that speeds up print speed.
It can be downloaded from our GitHub page:
https://github.com/bambulab/BambuStudio/releases/tag/v01.09.01.56
๐น New Features
1. Support Multi-device Management
2. Imported .obj File with Color Function
3. New CrossHatch Infill Pattern
๐น Improvements
1. Added binding method for pin code
2. Error code pop-up using new UI
3. Optimized PA calibration for P-series and A-series printers
4. Added more fonts. This improvement is inspired by PrusaSlicer.
5. Added an assembly tool for creating assembly relationships between objects. Currently, face-to-face and point-to-point assemblies have been achieved.
6. Add "filament long retraction when cut" for P1P and P1S. The P series firmware that supports this feature will be updated soon.
7. Some translations improvement.
8. Add local levelling for A1 series
๐น BugFixes
1. Fixed a issue of AMS mapping when printing with gcode.3mf
2. Fixed a wrong print sequence issue caused by narrow parts in internal bridge.
3. Fixed a Linux building issue.
We would love to get some feedback about it so we can further refine the main release.
Please let us know if you find bugs by opening an issue on GitHub
We're happy to let everyone know that the Bambu Studio 1.9.1 Public Beta 4 is now available, bringing highly requested features like Multi-Device Management, Staggered Print Start, Color .obj Importing and a new CrossHatch infill that speeds up print speed.
It can be downloaded from our GitHub page:
https://github.com/bambulab/BambuStudio/releases/tag/v01.09.01.56
๐น New Features
1. Support Multi-device Management
2. Imported .obj File with Color Function
3. New CrossHatch Infill Pattern
๐น Improvements
1. Added binding method for pin code
2. Error code pop-up using new UI
3. Optimized PA calibration for P-series and A-series printers
4. Added more fonts. This improvement is inspired by PrusaSlicer.
5. Added an assembly tool for creating assembly relationships between objects. Currently, face-to-face and point-to-point assemblies have been achieved.
6. Add "filament long retraction when cut" for P1P and P1S. The P series firmware that supports this feature will be updated soon.
7. Some translations improvement.
8. Add local levelling for A1 series
๐น BugFixes
1. Fixed a issue of AMS mapping when printing with gcode.3mf
2. Fixed a wrong print sequence issue caused by narrow parts in internal bridge.
3. Fixed a Linux building issue.
We would love to get some feedback about it so we can further refine the main release.
Please let us know if you find bugs by opening an issue on GitHub
GitHub
Release v01.09.01.56 ยท bambulab/BambuStudio
๐น We are writing to let you know that as of April 24th, 2024, we have updated our Terms of Use.
These changes won't affect the way you use our services. We are making these updates to support our evolving business and should help you to clearly understand what you will receive.
๐ We have primarily updated sections 7.1 to 7.4 in the Terms of Use.
7.4. Your Bambu Lab product will automatically search for and download new update packages to provide you with timely update services. These updates are designed to resolve cyber security loopholes and prevent new threats, and it is important to accept and install security related system updates in a timely manner. Due to the importance of these updates, your product may block new print job before the updates is installed, and will immediately provide update notifications to help you understand the related information.
@Bambu
These changes won't affect the way you use our services. We are making these updates to support our evolving business and should help you to clearly understand what you will receive.
7.4. Your Bambu Lab product will automatically search for and download new update packages to provide you with timely update services. These updates are designed to resolve cyber security loopholes and prevent new threats, and it is important to accept and install security related system updates in a timely manner. Due to the importance of these updates, your product may block new print job before the updates is installed, and will immediately provide update notifications to help you understand the related information.
@Bambu
Please open Telegram to view this post
VIEW IN TELEGRAM
๐น Software Update Window - Reviewed @Bambu
A1 Mini
Feature updates until September 20, 2028
Security updates until September 20, 2030
A1
Feature updates until December 14, 2028
Security updates until December 14, 2030
P1P / P1S
Feature updates until July 13, 2028
Security updates until July 13, 2030
X1C
Feature updates until May 31, 2027
Security updates until May 31, 2029
A1 Mini
Feature updates until September 20, 2028
Security updates until September 20, 2030
A1
Feature updates until December 14, 2028
Security updates until December 14, 2030
P1P / P1S
Feature updates until July 13, 2028
Security updates until July 13, 2030
X1C
Feature updates until May 31, 2027
Security updates until May 31, 2029
This media is not supported in your browser
VIEW IN TELEGRAM
Craft for your Mom a gift she'll love this Mother's Day!๐
Get 20% OFF select Bambu filaments and create something special together.
From April 25th to May 9th, take advantage of the promotion and print gifts made with love.๐
Explore more creative ideas at the @Bambu Store: https://bit.ly/4bfbzLW
Get 20% OFF select Bambu filaments and create something special together.
From April 25th to May 9th, take advantage of the promotion and print gifts made with love.๐
Explore more creative ideas at the @Bambu Store: https://bit.ly/4bfbzLW
10% OFF DISCOUNT COUPON @Bambu
โ
On any Printer, until July 1st:
RAMPAGEX96DUEP5ARVT9
Visit our store
Visit our store
Please open Telegram to view this post
VIEW IN TELEGRAM
๐น ๐ขCalling All Makers for the 'Image to Keychain' Beta Test!
Calling All Makers for the 'Image to Keychain' Beta Test! What is it? Transform any picture into a multicolored, 3D-printable keychain, bookmark, or other 2D art models.
How does it work? Simply pick an image, and Image to Keychain will prep it for 3D printing. Based on the vectorized image, match colors with the filaments available to you.
Plus, customize vector blocks by changing colors, adjusting thickness, or even hollowing out specific parts to create unique effects. Join our beta and be the first to try it out!
๐ To join, please fill out our quick questionnaire. Your feedback is crucial for our next step!
https://airtable.com/appbGlpFBNGusiCRG/shrjV9XyWD1y048l1
Stay tuned for updates. Let's make something creative together!
Calling All Makers for the 'Image to Keychain' Beta Test! What is it? Transform any picture into a multicolored, 3D-printable keychain, bookmark, or other 2D art models.
How does it work? Simply pick an image, and Image to Keychain will prep it for 3D printing. Based on the vectorized image, match colors with the filaments available to you.
Plus, customize vector blocks by changing colors, adjusting thickness, or even hollowing out specific parts to create unique effects. Join our beta and be the first to try it out!
๐ To join, please fill out our quick questionnaire. Your feedback is crucial for our next step!
https://airtable.com/appbGlpFBNGusiCRG/shrjV9XyWD1y048l1
Stay tuned for updates. Let's make something creative together!
Please open Telegram to view this post
VIEW IN TELEGRAM
๐น 10% Instant Savings or 24 mo. 0% APR on Printers purchased w/ Insider Card at MicroCenter
If you are a resident of the United States, you can take advantage of a 10% discount on our products by purchasing at any MicroCenter store.
If you are a resident of the United States, you can take advantage of a 10% discount on our products by purchasing at any MicroCenter store.
๐น ๐ขThe Parametric Model Maker is now integrated within the MakerWorld model page!
You can now seamlessly customize models uploaded with .scad files to create your own unique versions. This opens up endless possibilities for exploration!
Here are some good examples to start with:
https://makerworld.com/en/models/436888#profileId-342050
https://makerworld.com/en/models/55381#profileId-92304
https://makerworld.com/en/models/436893#profileId-342054
You can now seamlessly customize models uploaded with .scad files to create your own unique versions. This opens up endless possibilities for exploration!
Here are some good examples to start with:
https://makerworld.com/en/models/436888#profileId-342050
https://makerworld.com/en/models/55381#profileId-92304
https://makerworld.com/en/models/436893#profileId-342054
Makerworld
Chain of Letters (configurable) by Makkuro
๐ Please rate the print profiles and follow me - It would help tremendously. ๐ A keychain with your or your family/friends name, written in individual letters, which form a flexible chain after printing. The chain is fun to fidget with :-).Note that thisโฆ
โค1
10% OFF DISCOUNT COUPON @Bambu
โ
To prevent bots, certain discount codes will be shared as a photo.
๐ Be quick! The new coupons are 1-use only. There is no restriction by region.
Please open Telegram to view this post
VIEW IN TELEGRAM
10% OFF DISCOUNT COUPON @Bambu
โ
On any Printer, until July 1st:
Visit our store
RAMPAGE7KN8WH2QUU7SEVisit our store
Please open Telegram to view this post
VIEW IN TELEGRAM
Bambu Lab Asia Store
Bambu Lab A1 | Multi-color 3D Printer
Fully automated, Bambu Lab A1 with AMS lite shines as the best 3D printer for beginners, making multi-color 3d printing and multi-filament 3d printing accessible to EVERYONE!
๐น The new Bambu Studio Version 1.9.1 is ready for download! ๐คฉ
We poured in a lot of work to enhance the user experience in this version. The fully revamped error code pop-ups include clear illustrations and better descriptions for easier understanding. We also integrated MakerWorld directly into the Studio for convenient model browsing and printing.
https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-9-1
We poured in a lot of work to enhance the user experience in this version. The fully revamped error code pop-ups include clear illustrations and better descriptions for easier understanding. We also integrated MakerWorld directly into the Studio for convenient model browsing and printing.
https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-9-1