This media is not supported in your browser
VIEW IN TELEGRAM
Hey everyone! @Bambu
It's time to save the princess! Who's with me to take down that pesky Piranha Plant? Let's go! 💦
Model: Piranha Plant Switch Dock
Designer: hires2k
Model file from MakerWorld.
#bambulab #3dprintinglife #3dprinter #nintendoswitch #gamingsetup
It's time to save the princess! Who's with me to take down that pesky Piranha Plant? Let's go! 💦
Model: Piranha Plant Switch Dock
Designer: hires2k
Model file from MakerWorld.
#bambulab #3dprintinglife #3dprinter #nintendoswitch #gamingsetup
❤5👍5🔥3
🔹 Winners Announced!🎊
Congratulations to BuildyBryce for winning the Best-looking Award in the CMF Phone 1 by Nothing MakerWorld Contest!
🎉 ”This was a tough one to judge. However, the one that stood out, and the one I would definitely be rocking, is the brick case concept. Not only does it look cool, but it also offers endless customization possibilities.
This perfectly captures the essence of the modular design behind the CMF Phone 1. A head-turner to say the least!”—— Akis Evangelidis, Co-Founder, NothingExplore more surprises at MakerWorld： https://share.bambulab.com/Brickcase
Congratulations to BuildyBryce for winning the Best-looking Award in the CMF Phone 1 by Nothing MakerWorld Contest!
🎉 ”This was a tough one to judge. However, the one that stood out, and the one I would definitely be rocking, is the brick case concept. Not only does it look cool, but it also offers endless customization possibilities.
This perfectly captures the essence of the modular design behind the CMF Phone 1. A head-turner to say the least!”—— Akis Evangelidis, Co-Founder, NothingExplore more surprises at MakerWorld： https://share.bambulab.com/Brickcase
Makerworld
Brick Case for CMF Phone 1 by BuildyBryce
An experimental case for the CMF Phone 1 that's compatible with your favourite toy building bricks! My other CMF Phone 1 models:Brick CaseFidget ClickerWireless Charger Please note: 🔵 You will need glue to attach the 2 sides together. 🔵 You will need to provide…
1❤8👍1
🔹 Call all pet lovers!🐈 🐕 🐦
Who can't have a fondness for these furry little guys?
Golden Clans British Cattery is a big favor, what about yours? Come over to create and share your lil MONSTER's beloved pet supplies, and watch their adorable faces.
Check this link: share.bambulab.com/petsupplies
Who can't have a fondness for these furry little guys?
Golden Clans British Cattery is a big favor, what about yours? Come over to create and share your lil MONSTER's beloved pet supplies, and watch their adorable faces.
Check this link: share.bambulab.com/petsupplies
Makerworld
Pet Supplies - MakerWorld
Pet Supplies Pet Supplies For this contest, we are inviting designers to come up with pet supply models that enhances the daily life of pets and their owners. Think creatively and consider functionality, aesthetics, and sustainability. There are several aspects…
🔹 @Bambu Winner announced！🎊
Congratulations to guysread for winning the Unexpected Award in the CMF Phone 1 by Nothing MakerWorld Contest! 🎉
”I chose this fly swatter accessory as the winner for the "most unexpected" design because it perfectly embodies the quirky, outside-the-box thinking I was looking for. In a world where most smartphone accessories focus on tech enhancements or sleek aesthetics, this design takes a hilariously practical approach. The idea of attaching a fly swatter to your phone is both absurd and genius—it's so unexpected that it made me laugh, but then I realized it’s actually useful too! It turns an everyday annoyance, like swatting flies, into a conversation starter and a bit of fun. The blend of humor, originality, and sheer unpredictability is exactly what made this design stand out as the clear winner”
——Matty AKA /Unnecessary InventionsExplore more surprises at MakerWorld
Congratulations to guysread for winning the Unexpected Award in the CMF Phone 1 by Nothing MakerWorld Contest! 🎉
”I chose this fly swatter accessory as the winner for the "most unexpected" design because it perfectly embodies the quirky, outside-the-box thinking I was looking for. In a world where most smartphone accessories focus on tech enhancements or sleek aesthetics, this design takes a hilariously practical approach. The idea of attaching a fly swatter to your phone is both absurd and genius—it's so unexpected that it made me laugh, but then I realized it’s actually useful too! It turns an everyday annoyance, like swatting flies, into a conversation starter and a bit of fun. The blend of humor, originality, and sheer unpredictability is exactly what made this design stand out as the clear winner”
——Matty AKA /Unnecessary InventionsExplore more surprises at MakerWorld
Makerworld
Fly Swatter Accessory for CMF Phone 1 - Free 3D Print Model - MakerWorld
Download this free 3D print file designed by guysread. Fly Swatter Accessory for CMF Phone 1Are you tired of flies buzzing around or that one mosquito that keeps biting you?Here's a simple solution that you'll always have on you!Requires 2 “M2x5 Screws”It…
1👍5🤡3❤2🔥1
Filament Tape Issue
Based on user feedback and the tickets received by our Customer Support team, we have conducted an internal analysis to determine the filament tape issue reported by our customers. We would like to explain the situation better and inform our customers about why we chose to use tape for the filament end, and how this helps improve the user experience. We also want to share more information about a faulty batch which is causing some trouble.
In the past, we identified a problem that might occur where the end of the filament could clog the AMS feeder or the extruder. When the filament spool was depleted, the small section of the filament was not straight, leading to issues during the feeding process. If the filament has absorbed moisture, the small piece of filament could break inside the AMS feeder or extruder, leading to a clog or to feeding issues.
To solve this problem, Bambu Lab Filament has implemented tape to hold the beginning strand of filament attached to the spool. This design ensures that the end of the filament is straight and minimizes the chances of a clog.
The design was tested multiple times to ensure the filament is able to escape from the tape and cardboard roll when the spool is depleted.
Recently, we have discovered an issue where the tape was incorrectly applied on a very small batch of filament during production. The tape covering the end of the filament strand was incorrectly applied.
In rare cases, the tape could disconnect from the cardboard spool and be pulled by the filament as shown in the image.
We also suspect that the tape could become loose and remain attached to the filament strand, not working as expected, when the filament was used directly from the drier. The hotter air could assist in disconnecting the tape from the cardboard roll but also keeping it attached to the filament end.
In order to solve this problem, the jig used for the filament tape application was updated to ensure a better application. With the new application method of the new black tape, the filament end is secured and will allow the filament to safely detach once it is depleted, while the tape remains attached to the cardboard roll.
We apologize for this issue, and we recommend customers that encounter issues with the filament to contact our customer support team using the General Inquiry request for assistance, by providing the Serial Number of the filament spool and pictures of the issue that has occurred.
Thank you for your understanding in this matter. If you have any questions, feel free to contact us at Bambu Support: https://share.bambulab.com/Support
P.S.: The Live Chat feature is now available for immediate assistance from our support agents.
Based on user feedback and the tickets received by our Customer Support team, we have conducted an internal analysis to determine the filament tape issue reported by our customers. We would like to explain the situation better and inform our customers about why we chose to use tape for the filament end, and how this helps improve the user experience. We also want to share more information about a faulty batch which is causing some trouble.
In the past, we identified a problem that might occur where the end of the filament could clog the AMS feeder or the extruder. When the filament spool was depleted, the small section of the filament was not straight, leading to issues during the feeding process. If the filament has absorbed moisture, the small piece of filament could break inside the AMS feeder or extruder, leading to a clog or to feeding issues.
To solve this problem, Bambu Lab Filament has implemented tape to hold the beginning strand of filament attached to the spool. This design ensures that the end of the filament is straight and minimizes the chances of a clog.
The design was tested multiple times to ensure the filament is able to escape from the tape and cardboard roll when the spool is depleted.
Recently, we have discovered an issue where the tape was incorrectly applied on a very small batch of filament during production. The tape covering the end of the filament strand was incorrectly applied.
In rare cases, the tape could disconnect from the cardboard spool and be pulled by the filament as shown in the image.
We also suspect that the tape could become loose and remain attached to the filament strand, not working as expected, when the filament was used directly from the drier. The hotter air could assist in disconnecting the tape from the cardboard roll but also keeping it attached to the filament end.
In order to solve this problem, the jig used for the filament tape application was updated to ensure a better application. With the new application method of the new black tape, the filament end is secured and will allow the filament to safely detach once it is depleted, while the tape remains attached to the cardboard roll.
We apologize for this issue, and we recommend customers that encounter issues with the filament to contact our customer support team using the General Inquiry request for assistance, by providing the Serial Number of the filament spool and pictures of the issue that has occurred.
Thank you for your understanding in this matter. If you have any questions, feel free to contact us at Bambu Support: https://share.bambulab.com/Support
P.S.: The Live Chat feature is now available for immediate assistance from our support agents.
👍20🔥4❤3👎2
This media is not supported in your browser
VIEW IN TELEGRAM
A cute 3D Printed Piano Music Box Model: Piano Music Box Designer: SheepMe! Model file from MakerWorld. #bambulab #3Dprinting #3Dprinter #musicbox #piano
👍6🔥2
New step in ecosystem collaboration with E3D and DiamondBack! 🎉
We are thrilled to introduce this new hotend—DiamondBack Bambu Lab HotEnd. This premium upgrade offers unmatched wear resistance, enabling you to print with any filament, including engineering-grade metals and ceramic-filled materials.
Explore more here 🔗
@Bambu
We are thrilled to introduce this new hotend—DiamondBack Bambu Lab HotEnd. This premium upgrade offers unmatched wear resistance, enabling you to print with any filament, including engineering-grade metals and ceramic-filled materials.
Explore more here 🔗
@Bambu
🔥12👍4❤1
This media is not supported in your browser
VIEW IN TELEGRAM
Relive the Arcade Classics: Turn Your Apple Watch into a Retro Gaming Console with Our 3D Printed Model Model: Smart Watch Arcade Charger Desiger: Hollandje Model file from MakerWorld. #bambulab #3dprintinglife #3Dprinter #arcade #applewatch
❤4👍4
This media is not supported in your browser
VIEW IN TELEGRAM
This sure would help!! Models: Switch Single Joy-Con Grip 2024/ Joy-Con Grip 2024 Designed by Manabun Lab Model files from MakerWorld. #bambulab #3dprintinglife #nintendoswitch #3dprinter #gaming
❤9
Level Up Your 3D Printing with Mako™ Hotend for Bambu Lab🚀
A new collaboration has been formed between Bambu Lab and Slice Engineering🔥
The result is the Mako™ Hotend for Bambu Lab X and P series printers. Experience effortless nozzle changes, optimized high-flow performance, superior thermal stability, and a durable, rugged printing experience.
↪️ Discover more here
We've also prepared 5 Mako™ Hotends to give away🎉 If you're interested in getting one and sharing your insights, please fill out the questionnaire below.
https://share.bambulab.com/TesterRecruitment
A new collaboration has been formed between Bambu Lab and Slice Engineering🔥
The result is the Mako™ Hotend for Bambu Lab X and P series printers. Experience effortless nozzle changes, optimized high-flow performance, superior thermal stability, and a durable, rugged printing experience.
↪️ Discover more here
We've also prepared 5 Mako™ Hotends to give away🎉 If you're interested in getting one and sharing your insights, please fill out the questionnaire below.
https://share.bambulab.com/TesterRecruitment
❤3👍2