ChangeLogs:
- Was been fixed compatibilityData.
- Passcode Remove Screen restriction working again.
This service also works to clean your bypassed phone so you can resell it, although obviously it wouldn't have a signal.
1. If your device has a screen lock password, try turning off the screen lock password by: Settings > General Settings > Transfer or Reset iPhone > Reset > Reset all settings
2. If device have screen time passcode > click "Remove Restriction" > The device will restart. As soon as the screen turns on, if device can't turn off screen passcode you must quickly enter the screen passcode. After Remove Screentime Passcode Device will back to screen settup > Make sure to select "Continue with Partial Setup > Customize Seting > Don't restore app and data". After finish you must do Reset all settings: Settings > General Settings > Transfer or Reset iPhone > Reset > Reset all settings.
3. Click "Start" for delete iCloud account (This not FMI OFF so Do NOT RESTORE OR FACTORY RESET DEVICE)
4. Once the tool has removed the iCloud account from the device, Block Reset is Added automatic
Download: https://www.mediafire.com/file/vpoxqtlcatmgosp/AldazA12-OM.pkg/file
Dhru connection https://t.me/ihackglobal
Please open Telegram to view this post
VIEW IN TELEGRAM
MediaFire
AldazA12-OM
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
โค10๐ฅ2
Bypass in version 26.2 is not supported at the moment (only beta 1, although I never recommend using betas). bookassetd and itunesstored have been patched, and shouldhactivate as well (as far as I can see).
There are no tools available that support the RC version. If someone tells you "hey, my tool supports it," run!
Only the developers will know that bookassetd has been patched. I'm waiting for the official version to see how much has changed, although with the RC, I can already imagine what it's like.
And if it's just a matter of waiting, if there's a fix, I'll try to bring it as soon as possible, but as it stands, it's just a matter of waiting.
There are no tools available that support the RC version. If someone tells you "hey, my tool supports it," run!
Only the developers will know that bookassetd has been patched. I'm waiting for the official version to see how much has changed, although with the RC, I can already imagine what it's like.
And if it's just a matter of waiting, if there's a fix, I'll try to bring it as soon as possible, but as it stands, it's just a matter of waiting.
โค25๐4๐ฅ4๐คฏ1
Aldaz Channel ๐ pinned ยซBypass in version 26.2 is not supported at the moment (only beta 1, although I never recommend using betas). bookassetd and itunesstored have been patched, and shouldhactivate as well (as far as I can see). There are no tools available that support the RCโฆยป
For CH-A systems, if you're using Windows, restore using Apple Configurator and an MDM account. If it still doesn't work, repeat the step, but this time try connecting to Wi-Fi after the first reboot.
I recommend MacBooks for CH/A systems. If you're already technicians, try to get at least a 2016 MacBook; the best support will always be there. I'm not being elitist; I know some of you don't have the means to own a MacBook, but a Hackintosh or virtual machine works wonderfully.
for account mdm contact with resellers !
I recommend MacBooks for CH/A systems. If you're already technicians, try to get at least a 2016 MacBook; the best support will always be there. I'm not being elitist; I know some of you don't have the means to own a MacBook, but a Hackintosh or virtual machine works wonderfully.
for account mdm contact with resellers !
๐ฅ2
AldazActivator A12+ Steps Error and Solution
1. Connect device to wifi.
2. Click in Activate
if u have issue like:
- There was an error, the timeout has exceeded\nis the device still connected?
Solution: check your USB Cable, and check if device is reboot, if not close 3u and try again
-[REQ] Timeout โ connect your device to Wi-Fi and try again
your device cant download info from server, this problem is easy fix
how fix for chinnese device or jp/a:
1. Go to your MacBook Settings.
2. Navigate to Sharing.
3. You will find that Internet Sharing is disable. Please enable it.
4. Configure, select USB iPhone
5. Check if the iPhone is actually receiving internet via USB. Restart the iPhone and go to Activation Lock. The Wi-Fi icon shouldn't appear, but it should still be receiving Wi-Fi via USB.
6. Then go back to your bypass software, and you will notice that the process works perfectly without any interruptions.
- [DOWNLOAD CONNECTION WIFI PT2] Timeout โ connect device to Wi-Fi and try again.
- Init Client Failed from session!
Solution: There might be a corrupted or invalid AFC file in the bypass.
Open 3utools, go to the Files section, and delete Downloads, Books, and all the folders there.
Unable to Activate Device, please try again or contact with admin!
solution: try again, if not work contact with admin, need send picture with info from device, ProductType, iOS version and serialNumber
1. Connect device to wifi.
2. Click in Activate
if u have issue like:
- There was an error, the timeout has exceeded\nis the device still connected?
Solution: check your USB Cable, and check if device is reboot, if not close 3u and try again
-[REQ] Timeout โ connect your device to Wi-Fi and try again
your device cant download info from server, this problem is easy fix
how fix for chinnese device or jp/a:
1. Go to your MacBook Settings.
2. Navigate to Sharing.
3. You will find that Internet Sharing is disable. Please enable it.
4. Configure, select USB iPhone
5. Check if the iPhone is actually receiving internet via USB. Restart the iPhone and go to Activation Lock. The Wi-Fi icon shouldn't appear, but it should still be receiving Wi-Fi via USB.
6. Then go back to your bypass software, and you will notice that the process works perfectly without any interruptions.
- [DOWNLOAD CONNECTION WIFI PT2] Timeout โ connect device to Wi-Fi and try again.
- Init Client Failed from session!
Solution: There might be a corrupted or invalid AFC file in the bypass.
Open 3utools, go to the Files section, and delete Downloads, Books, and all the folders there.
Unable to Activate Device, please try again or contact with admin!
solution: try again, if not work contact with admin, need send picture with info from device, ProductType, iOS version and serialNumber
โค13
You can now download and use our new tool designed to Bypass Device โ (from the Phone 6s to the X all checkm8 no Signal), all in one place, with direct support and automatic updates.
Compatible with macOS 10/26
๐ฅ Download it now: https://www.mediafire.com/file/ioufptjgltq9mhv/AldazActivator+CHECKM8.pkg/file
https://t.me/aldazdev
Please open Telegram to view this post
VIEW IN TELEGRAM
๐ฅ3
AldazT2RActivator Tool
๐ Now Supporting 9.1-10.1!
Stay tuned for exclusive updates and new features!
Why choose AldazT2?
โ Instant Activation โ Lightning-fast result.
โ Reboot Friendly โ No interruptions, seamless process.
โ Untethered โ No limits.
โ OTA Update โ Stay up to date with ease.
โ Force Restart โ Full control whenever you need it.
Download HEREโญ๏ธ
Tutorial from web
https://ialdaz-activator.com/Tools/Tutorial/t2_helloโ๏ธ
Stay tuned for exclusive updates and new features!
Why choose AldazT2?
โ Instant Activation โ Lightning-fast result.
โ Reboot Friendly โ No interruptions, seamless process.
โ Untethered โ No limits.
โ OTA Update โ Stay up to date with ease.
โ Force Restart โ Full control whenever you need it.
Download HERE
Tutorial from web
https://ialdaz-activator.com/Tools/Tutorial/t2_hello
Please open Telegram to view this post
VIEW IN TELEGRAM
๐ฅ2โค1
Includes exclusive tool prices:
โขโ โ
โขโ โ
โขโ โ
โขโ โ
โขโ โ โ
Top up 100 USDT
We assign you the Christmas Package
Enjoy special prices on selected tools
Please open Telegram to view this post
VIEW IN TELEGRAM
โค6๐1๐1๐1
We've said it many times already.
Official group: https://t.me/AldazOfficial
Official channel: https://t.me/aldazdev
The others are not officially from me.
Most of them might be trying to scam you. I'm not aware of all the groups that exist, but I'm the only one responsible for the links I just provided. I'm not responsible for anything else.
Official group: https://t.me/AldazOfficial
Official channel: https://t.me/aldazdev
The others are not officially from me.
Most of them might be trying to scam you. I'm not aware of all the groups that exist, but I'm the only one responsible for the links I just provided. I'm not responsible for anything else.
โค12๐1
New services soon ๐
Please open Telegram to view this post
VIEW IN TELEGRAM
โค31๐ค9๐8๐ฅฐ3๐ฅ1๐คฏ1
You can now download and use our new tool designed to Bypass Device โ (from the Phone 4s to the 5c NO Signal Hello and Signal Passcode.), all in one place, with direct support and automatic updates.
now you can bypass device factory in mode hello or BypassPasscode A6 without arduino only in dfu!
A5 device BypassPasscode will be need arduino yes o yes
Compatible with macOS 10/26
Compatible Device:
NEED ARDUINO = Y.N.D
iPhone 4s (Y.N.D)
iPhone 5/5c
iPad mini 1 (Y.N.D)
iPad 2 (Y.N.D)
iPad 2 (Mid 2012) (Y.N.D)
iPad 3 (Y.N.D)
iPad 4
This tool allows you to bypass the passcode on A5 and A6 devices with Calls, All iservices, iCloud Login, FaceTime & iMessage.
It also allows you to bypass the Hello Screen on A6 with All iservices, iCloud Login, FaceTime & iMessage
๐ฅ Download it now: https://www.mediafire.com/file/6rijhirg1nqdcsh/iAldazA6RamDisk.pkg/file
https://t.me/aldazdev
Please open Telegram to view this post
VIEW IN TELEGRAM
โค18๐ฅ4๐2๐1
Others services will be cooming soon, only wait updates and services news
โค4๐ฅ3๐3
๐พ Get it here:
โ ๏ธ Make sure your device is ready before installation!
Please open Telegram to view this post
VIEW IN TELEGRAM
โค8
End Game OS 26.1 and 10.1
Remember this tool support 17-26.1 and iOS 15-16 support by Anydesk.
Remember this tool support 17-26.1 and iOS 15-16 support by Anydesk.
โค12๐3
AldazActivator v3.2.0 A12+ released
-Added support iOS 15-26.1
enjoy !
-Added support iOS 15-26.1
enjoy !
โค7