Composites
Photo
Ineos Composites is a leading global manufacturer of unsaturated polyester resins, vinyl ester resins and gelcoats used in the production of plastic composites for a wide range of applications across large global end-markets including building materials, recreation, transportation and wind energy, among others. Ineos Composites sells a broad range of resins that allow customers to optimize certain characteristics of their products, including corrosion resistance, fire retardance, ultraviolet resistance, water and chemical resistance, thermal and electrical insulation, impact and scratch resistance, and high strength-to-weight ratios.
About KPS Capital Partners, LP
KPS, through its affiliated management entities, is the manager of the KPS Special Situations Funds, a family of investment funds with approximately $21.4 billion of assets under management (as of September 30, 2024). For over three decades, the Partners of KPS have worked exclusively to realize significant capital appreciation by making controlling equity investments in manufacturing and industrial companies across a diverse array of industries, including basic materials, branded consumer, healthcare and luxury products, automotive parts, capital equipment, and general manufacturing. KPS creates value for its investors by working constructively with talented management teams to make businesses better and generates investment returns by structurally improving the strategic position, competitiveness, and profitability of its portfolio companies, rather than primarily relying on financial leverage. The KPS Funds’ portfolio companies currently generate aggregate annual revenues of approximately $23.7 billion, operate 251 manufacturing facilities in 30 countries, and have approximately 65,000 employees, directly and through joint ventures worldwide (as of September 30, 2024, pro forma for recent acquisitions).
About Ineos Enterprises
Ineos Enterprises comprises a portfolio of businesses manufacturing chemical products in Northern Europe, the USA and Canada, with sales of €2.7bn around the world. The business is focused on the developing needs of its customers and rapid growth through investment in new products and manufacturing facilities or by acquisition. It employs c. 3,100 people across sites in the UK, Germany, Sweden, Switzerland, Canada and the USA. INEOS Enterprises is not part of the INEOS Group Holdings bank group.
#composites #Ineos #KPSCapitalPartners
> source
About KPS Capital Partners, LP
KPS, through its affiliated management entities, is the manager of the KPS Special Situations Funds, a family of investment funds with approximately $21.4 billion of assets under management (as of September 30, 2024). For over three decades, the Partners of KPS have worked exclusively to realize significant capital appreciation by making controlling equity investments in manufacturing and industrial companies across a diverse array of industries, including basic materials, branded consumer, healthcare and luxury products, automotive parts, capital equipment, and general manufacturing. KPS creates value for its investors by working constructively with talented management teams to make businesses better and generates investment returns by structurally improving the strategic position, competitiveness, and profitability of its portfolio companies, rather than primarily relying on financial leverage. The KPS Funds’ portfolio companies currently generate aggregate annual revenues of approximately $23.7 billion, operate 251 manufacturing facilities in 30 countries, and have approximately 65,000 employees, directly and through joint ventures worldwide (as of September 30, 2024, pro forma for recent acquisitions).
About Ineos Enterprises
Ineos Enterprises comprises a portfolio of businesses manufacturing chemical products in Northern Europe, the USA and Canada, with sales of €2.7bn around the world. The business is focused on the developing needs of its customers and rapid growth through investment in new products and manufacturing facilities or by acquisition. It employs c. 3,100 people across sites in the UK, Germany, Sweden, Switzerland, Canada and the USA. INEOS Enterprises is not part of the INEOS Group Holdings bank group.
#composites #Ineos #KPSCapitalPartners
> source
Dear colleagues!
⚡️ We inform you about the start of booking stands in the new pavilion 8 (hall 2) of the Expocentre Fairgrounds (Moscow, Russia) for the Composite Expo exhibition.
We remind you that in 2025, the 17th international exhibition Composite Expo together with the 16th exhibition Polyurethanex will occupy three pavilions of the Expocentre Fairgrounds: 1, 5 and 8 (hall 2).
🔸 Book a stand at the exhibition
🎞 We also inform you that for your convenience, we have launched a channel on the RUTUBE video service.
Now you can watch the video report on Composite Expo 2024 there.
⚡️ We inform you about the start of booking stands in the new pavilion 8 (hall 2) of the Expocentre Fairgrounds (Moscow, Russia) for the Composite Expo exhibition.
We remind you that in 2025, the 17th international exhibition Composite Expo together with the 16th exhibition Polyurethanex will occupy three pavilions of the Expocentre Fairgrounds: 1, 5 and 8 (hall 2).
🔸 Book a stand at the exhibition
🎞 We also inform you that for your convenience, we have launched a channel on the RUTUBE video service.
Now you can watch the video report on Composite Expo 2024 there.
Composites
Photo
Metyx celebrates dual achievements: R&D centre certification and a new CFM product introduction
Metyx, a global leader in composite materials and technical textiles, announces two landmark achievements that underscore its commitment to innovation and sustainability in the composites industry. The company’s Research & Development (R&D) Center in Manisa, Turkey, has been officially licensed, highlighting its role as a key player in advancing composite technologies. Simultaneously, Metyx has unveiled its latest product innovation, the Continuous Filament Mat (CFM), designed to enhance performance and efficiency across industries.
Metyx R&D Center: a new era of innovation
The licensing of the Metyx R&D Center is a testament to the company’s dedication to
advancing technology and delivering sustainable solutions. This recognition places Metyx among an exclusive group of companies in Turkey, with only 1,331 certified R&D centres as of December, 2024. The rigorous licensing process underscores the center’s compliance with the highest standards in research and development.
Introducing Continuous Filament Mat (CFM)
Complementing this achievement is the launch of the advanced Continuous Filament Mat (CFM). Designed to deliver superior tensile strength and structural integrity, the CFM is engineered for a wide range of applications in industries such as construction, automotive, and infrastructure.
What sets Metyx’s CFM apart is its ability to optimize production efficiency. By streamlining workflows, it reduces labor requirements and production costs while improving overall shop efficiency. The product is also compatible with general-purpose and corrosion-resistant polyester, vinyl ester, and epoxy resin systems, making it a versatile solution for manufacturers.
“These two milestones represent METYX’s dual commitment to innovation and sustainability,” said Uğur Üstünel. “Our R&D Center enables us to lead the way in technological advancements, while the launch of CFM addresses immediate market needs by enhancing efficiency and reducing environmental impact. Together, these developments solidify METYX’s position as a trusted partner in the composites industry.”
Key features and benefits of Metyx CFM
• Enhanced Performance: Offers exceptional tensile strength and durability.
• Process Optimization: Saves labor and improves shop efficiency.
• Sustainability Focused: Minimizes waste while supporting streamlined production.
• Cost Efficiency: Reduces production costs with simplified workflows.
• Versatility: Compatible with multiple resin systems for diverse applications.
#composites #Metyx #CFM
> source
Metyx, a global leader in composite materials and technical textiles, announces two landmark achievements that underscore its commitment to innovation and sustainability in the composites industry. The company’s Research & Development (R&D) Center in Manisa, Turkey, has been officially licensed, highlighting its role as a key player in advancing composite technologies. Simultaneously, Metyx has unveiled its latest product innovation, the Continuous Filament Mat (CFM), designed to enhance performance and efficiency across industries.
Metyx R&D Center: a new era of innovation
The licensing of the Metyx R&D Center is a testament to the company’s dedication to
advancing technology and delivering sustainable solutions. This recognition places Metyx among an exclusive group of companies in Turkey, with only 1,331 certified R&D centres as of December, 2024. The rigorous licensing process underscores the center’s compliance with the highest standards in research and development.
Introducing Continuous Filament Mat (CFM)
Complementing this achievement is the launch of the advanced Continuous Filament Mat (CFM). Designed to deliver superior tensile strength and structural integrity, the CFM is engineered for a wide range of applications in industries such as construction, automotive, and infrastructure.
What sets Metyx’s CFM apart is its ability to optimize production efficiency. By streamlining workflows, it reduces labor requirements and production costs while improving overall shop efficiency. The product is also compatible with general-purpose and corrosion-resistant polyester, vinyl ester, and epoxy resin systems, making it a versatile solution for manufacturers.
“These two milestones represent METYX’s dual commitment to innovation and sustainability,” said Uğur Üstünel. “Our R&D Center enables us to lead the way in technological advancements, while the launch of CFM addresses immediate market needs by enhancing efficiency and reducing environmental impact. Together, these developments solidify METYX’s position as a trusted partner in the composites industry.”
Key features and benefits of Metyx CFM
• Enhanced Performance: Offers exceptional tensile strength and durability.
• Process Optimization: Saves labor and improves shop efficiency.
• Sustainability Focused: Minimizes waste while supporting streamlined production.
• Cost Efficiency: Reduces production costs with simplified workflows.
• Versatility: Compatible with multiple resin systems for diverse applications.
#composites #Metyx #CFM
> source
Composites
Photo
“Our material combines stones with a negative carbon footprint and biosourced carbon fibres”, says Kolja Kuse, CEO at TechnoCarbon Technologies
TechnoCarbon Technologies has developed a new solution designed to reduce the carbon footprint of buildings. Winner of a JEC Innovation Award, the Daccuss enclosure wall (for Direct Air Carbon Capture, Utilisation and Safe Storage) combines the effects of different materials to promote energy efficiency and CO2-negativity, while guaranteeing access to accessible and flexible resources. We spoke to Kolja Kuse, CEO at TechnoCarbon Technologies.
How does CarbonFibreStone (CFS) work?
Our system is based on a compression-stable core of stone, to the surface of which a glue-bonded fibre material is applied on one side, both sides or the entire surface. This technology makes possible the production of ‘stone slabs’ from 20mm thickness down to 1.2 mm. The gravity of the stone is only a bit more than of aluminum. If they are between 1 and 2 mm thin, they will be even lighter.
The surface coating gives the composite pre-stressing. Thanks to the carbon fibre, the stone acquires tensile stability and becomes a construction material with a specific weight much less than that of steel at same performance.
Slabs and other stone geometries can be bent within adjustable limits, while being returned to their original position under lighter loads without any fatigue. This feature distinguishes the material from the metal. The elastic limits of the CarbonFibreStone (CFS) are higher than those of metal, and the material remains elastic until it breaks. The damping properties are superior to those of metals and pure carbon fibre materials. Stone slabs can be produced with 2m x 3m in size.
How do you explain the CO2 function?
CFS is a material that combines stones with a negative carbon footprint and biosourced carbon fibres. We use CO2-absorbing igneous stone (one of the three main types of rock resulting from the solidification of magma in the deep layers of the Earth’s crust or in the upper layer of the mantle), such as basalt, granite or gabbro, combined with carbon fibre, developed by the DITF – Deutsche Institute für Textil- und Faserforschung Denkendorf, which is also designed to be CO2 negative. Carbon fibres are produced either from lignin from the wood industry (biomass) or from algae oil or vegetable oil.
Natural stone is particularly interesting in this composite, as it can be extracted with low energy consumption and has a high degree of homogeneity from a mechanical point of view. It is also capable of absorbing high pressure and shear force without damage, since it has with about 60PGa a comparable low Young’s modulus of elasticity, in many cases even lower than aluminum.
Compared with concrete, natural stone has the advantage of being at least twice as stable under pressure and four times as stable under tension, and does not age within the timescales relevant to construction. Certainly, the Young’s modulus depends on the type of stone we are using. The catalogue of granite types records more than 6000 different stones. This is one of the interesting things about CFS, that there is a wide range of technical specifications we can meet. Many of these granites are literally limitless available. CFS replaces reinforced concrete, a major C02 emitter due to the use of fossil lime stone, in house walls. Each square metre of CFS wall captures 59 kg of CO2, whereas traditional cement walls emit 98 kg. Stone slabs reinforced with polyacrylonitrile (PAN) carbon fibres made from algae oil, for example, create highly carbon-negative walls. The material is also twice as light and two to three times stronger than cement. We need to get rid of all fossil material, not only in the energy sector, but in buildings as well: cement today is based by 100% on fossil-based material.
What are DACCUSS bricks?
TechnoCarbon Technologies has developed a new solution designed to reduce the carbon footprint of buildings. Winner of a JEC Innovation Award, the Daccuss enclosure wall (for Direct Air Carbon Capture, Utilisation and Safe Storage) combines the effects of different materials to promote energy efficiency and CO2-negativity, while guaranteeing access to accessible and flexible resources. We spoke to Kolja Kuse, CEO at TechnoCarbon Technologies.
How does CarbonFibreStone (CFS) work?
Our system is based on a compression-stable core of stone, to the surface of which a glue-bonded fibre material is applied on one side, both sides or the entire surface. This technology makes possible the production of ‘stone slabs’ from 20mm thickness down to 1.2 mm. The gravity of the stone is only a bit more than of aluminum. If they are between 1 and 2 mm thin, they will be even lighter.
The surface coating gives the composite pre-stressing. Thanks to the carbon fibre, the stone acquires tensile stability and becomes a construction material with a specific weight much less than that of steel at same performance.
Slabs and other stone geometries can be bent within adjustable limits, while being returned to their original position under lighter loads without any fatigue. This feature distinguishes the material from the metal. The elastic limits of the CarbonFibreStone (CFS) are higher than those of metal, and the material remains elastic until it breaks. The damping properties are superior to those of metals and pure carbon fibre materials. Stone slabs can be produced with 2m x 3m in size.
How do you explain the CO2 function?
CFS is a material that combines stones with a negative carbon footprint and biosourced carbon fibres. We use CO2-absorbing igneous stone (one of the three main types of rock resulting from the solidification of magma in the deep layers of the Earth’s crust or in the upper layer of the mantle), such as basalt, granite or gabbro, combined with carbon fibre, developed by the DITF – Deutsche Institute für Textil- und Faserforschung Denkendorf, which is also designed to be CO2 negative. Carbon fibres are produced either from lignin from the wood industry (biomass) or from algae oil or vegetable oil.
Natural stone is particularly interesting in this composite, as it can be extracted with low energy consumption and has a high degree of homogeneity from a mechanical point of view. It is also capable of absorbing high pressure and shear force without damage, since it has with about 60PGa a comparable low Young’s modulus of elasticity, in many cases even lower than aluminum.
Compared with concrete, natural stone has the advantage of being at least twice as stable under pressure and four times as stable under tension, and does not age within the timescales relevant to construction. Certainly, the Young’s modulus depends on the type of stone we are using. The catalogue of granite types records more than 6000 different stones. This is one of the interesting things about CFS, that there is a wide range of technical specifications we can meet. Many of these granites are literally limitless available. CFS replaces reinforced concrete, a major C02 emitter due to the use of fossil lime stone, in house walls. Each square metre of CFS wall captures 59 kg of CO2, whereas traditional cement walls emit 98 kg. Stone slabs reinforced with polyacrylonitrile (PAN) carbon fibres made from algae oil, for example, create highly carbon-negative walls. The material is also twice as light and two to three times stronger than cement. We need to get rid of all fossil material, not only in the energy sector, but in buildings as well: cement today is based by 100% on fossil-based material.
What are DACCUSS bricks?
Composites
Photo
DACCUSS (Direct Air Carbon Capture, Utilisation and Safe Storage) building blocks enclosure walls (and eventually ceilings in the future) are based on CFS technology, with the effect amplified by the use of an insulating filling of carbon-negative charcoal or biochar granules. Biochar can be produced from any plant material, heated without oxygen to between 300°C and 700°C. This biomass pyrolysis residue generated green energy and is typically used already in agriculture to regenerate soils depleted by intensive farming, retain water and trap CO2 and avoid artificial fertilisation of soil.The material can be easily reused by peeling off the fibre on one side and the stone on the other. Our material requires a very small amount of carbon fibre and the stone residues, recovered in powder form when sliced for example, are used as fertiliser to absorb atmospheric CO2 by natural weathering processes. In case we would replace all concrete worldwide, we could eventally capture 4Gt of CO2 per year and avoid6 GT of CO2 of fossil origin. In a nutshell, we promote the replacement of fossil stone treatment to produce artificial stone like concrete by ultimate available igneous rock. Our project was supported by the German Goverment, Ministry of Research and Education, as part of the CDRterra project, and included Life Cycle Assessment (LCA) and Techno Economical Analysis (TEA) as part of the projects milestones. The results are encouraging because, as building blocks are produced in large quantities, their costs are slightly below that of a comparable wall of concrete. First collaborations with other countries and local start-ups have already been established.
#composites #TechnoCarbon #CarbonFibreStone
> source
#composites #TechnoCarbon #CarbonFibreStone
> source
Composites
Photo
Owens Corning to sell glass reinforcements business to Praana Group
Owens Corning, a residential and commercial building products leader, and Praana Group, an India-based holding group that operates a diverse portfolio of companies primarily serving the industrial sector, announced today that they have signed a definitive agreement for the sale of Owens Corning’s glass reinforcements business to Praana Group (through its subsidiaries) at an enterprise value of $755,000,000. This sale is a part of Owens Corning’s strategic plan to reshape the company to focus on residential and commercial building products in North America and Europe.
Owens Corning’s glass reinforcements business, part of the company’s Composites segment, manufactures, fabricates and sells glass fibre reinforcements for a wide variety of applications in wind energy, infrastructure, industrial, transportation and consumer markets. The business generated revenue of approximately $1.1 billion in 2024 and has approximately 4,000 employees across a global footprint that includes 18 operations in 12 countries.
Brian Chambers, Owens Corning Chair and Chief Executive Officer, stated, “After a comprehensive review of strategic alternatives, the Owens Corning Board concluded that a sale of the business to the Praana Group supports the company’s strategic plan and results in the greatest overall value to its shareholders. I want to thank the glass reinforcements team for their continued focus on operating safely, delivering high-quality products, and helping customers win and grow in the market.
“This transaction strengthens Owens Corning as a focused, more capital-efficient building products leader in North America and Europe. The combination of today’s announcement, along with the strategic initiatives and investments we have made over the past several years, positions us to drive profitable growth and deliver strong cash generation to maximise long-term shareholder value,” concluded Chambers.
Vishal Goenka, Vice Chairman of Praana Group, and Anuj Goenka, Executive Board Member of Praana Group, said, “The glass fibre reinforcement business is highly competitive and is poised for growth in the medium to long run, especially on account of the global push towards adoption of clean energy, reduction of carbon footprint and material substitution. This strategic acquisition will grow our footprint in glass reinforcements with new geographies, broaden the scope of our operations, and enhance our ability to deliver solutions that contribute to global efforts for a more sustainable and efficient future. It will also strengthen Praana Group’s competitiveness and operational efficiencies in glass fibre reinforcements for composites for the industrial sector.”
Vishal Shah, Executive Director and Global Head of M&A for Praana Group, added, “Praana has a long track record of acquiring carve-outs and establishing them as thriving, independent companies. We are highly enthusiastic about the acquisition of Owens Corning’s glass reinforcements business and believe it represents a great opportunity to implement our transformational growth strategy.”
The sale will complete Owens Corning’s review of strategic alternatives for the business announced in early 2024. The transaction is expected to close in 2025 and is subject to customary regulatory approvals and other conditions.
Owens Corning will retain the other businesses within its Composites segment. These include the company’s vertically integrated glass nonwovens business that supports its Roofing segment and other building products customers, along with its structural lumber business. Going forward, these businesses will operate within Owens Corning’s Roofing segment. Owens Corning’s 2 glass melting plants in the U.S., which provide glass fibres to make nonwovens products, will operate and be integrated within its Insulation segment.
About Owens Corning
Owens Corning, a residential and commercial building products leader, and Praana Group, an India-based holding group that operates a diverse portfolio of companies primarily serving the industrial sector, announced today that they have signed a definitive agreement for the sale of Owens Corning’s glass reinforcements business to Praana Group (through its subsidiaries) at an enterprise value of $755,000,000. This sale is a part of Owens Corning’s strategic plan to reshape the company to focus on residential and commercial building products in North America and Europe.
Owens Corning’s glass reinforcements business, part of the company’s Composites segment, manufactures, fabricates and sells glass fibre reinforcements for a wide variety of applications in wind energy, infrastructure, industrial, transportation and consumer markets. The business generated revenue of approximately $1.1 billion in 2024 and has approximately 4,000 employees across a global footprint that includes 18 operations in 12 countries.
Brian Chambers, Owens Corning Chair and Chief Executive Officer, stated, “After a comprehensive review of strategic alternatives, the Owens Corning Board concluded that a sale of the business to the Praana Group supports the company’s strategic plan and results in the greatest overall value to its shareholders. I want to thank the glass reinforcements team for their continued focus on operating safely, delivering high-quality products, and helping customers win and grow in the market.
“This transaction strengthens Owens Corning as a focused, more capital-efficient building products leader in North America and Europe. The combination of today’s announcement, along with the strategic initiatives and investments we have made over the past several years, positions us to drive profitable growth and deliver strong cash generation to maximise long-term shareholder value,” concluded Chambers.
Vishal Goenka, Vice Chairman of Praana Group, and Anuj Goenka, Executive Board Member of Praana Group, said, “The glass fibre reinforcement business is highly competitive and is poised for growth in the medium to long run, especially on account of the global push towards adoption of clean energy, reduction of carbon footprint and material substitution. This strategic acquisition will grow our footprint in glass reinforcements with new geographies, broaden the scope of our operations, and enhance our ability to deliver solutions that contribute to global efforts for a more sustainable and efficient future. It will also strengthen Praana Group’s competitiveness and operational efficiencies in glass fibre reinforcements for composites for the industrial sector.”
Vishal Shah, Executive Director and Global Head of M&A for Praana Group, added, “Praana has a long track record of acquiring carve-outs and establishing them as thriving, independent companies. We are highly enthusiastic about the acquisition of Owens Corning’s glass reinforcements business and believe it represents a great opportunity to implement our transformational growth strategy.”
The sale will complete Owens Corning’s review of strategic alternatives for the business announced in early 2024. The transaction is expected to close in 2025 and is subject to customary regulatory approvals and other conditions.
Owens Corning will retain the other businesses within its Composites segment. These include the company’s vertically integrated glass nonwovens business that supports its Roofing segment and other building products customers, along with its structural lumber business. Going forward, these businesses will operate within Owens Corning’s Roofing segment. Owens Corning’s 2 glass melting plants in the U.S., which provide glass fibres to make nonwovens products, will operate and be integrated within its Insulation segment.
About Owens Corning
Composites
Photo
Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Their products provide durable, sustainable, energy-efficient solutions that leverage their unique capabilities and market-leading positions to help their customers win and grow. They are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for their customers and shareholders and making a difference in the communities where they work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2023 sales of $9.7 billion.
About Praana Group
Established in 1956, Praana Group is an India-based multinational engaged in operating a global portfolio of manufacturing facilities in the fields of specialty chemicals (Sterling Specialty Chemicals, Galata Chemicals, Artek Surfin Chemicals) and glass fibre & composite materials (3B Fibreglass). Their innovative solutions and high-quality products cater to a wide range of industries like construction, textiles, automotive, home & personal care, energy and industrial markets. Their philosophy revolves around a growth mindset, sufficient capitalization for contingencies and a relentless commitment to sustainability standards.
#composites #OwensCorning #PraanaGroup
> source
About Praana Group
Established in 1956, Praana Group is an India-based multinational engaged in operating a global portfolio of manufacturing facilities in the fields of specialty chemicals (Sterling Specialty Chemicals, Galata Chemicals, Artek Surfin Chemicals) and glass fibre & composite materials (3B Fibreglass). Their innovative solutions and high-quality products cater to a wide range of industries like construction, textiles, automotive, home & personal care, energy and industrial markets. Their philosophy revolves around a growth mindset, sufficient capitalization for contingencies and a relentless commitment to sustainability standards.
#composites #OwensCorning #PraanaGroup
> source
Dear participants and visitors of the «Composite Expo 2025» exhibition!
📋 The preliminary program of the Sixth scientific and practical conference "Practical aspects of using composite materials in various industries" is posted on the event website.
Date: March 26, 2025.
Venue: Moscow, Expocentre Fairgrounds, Pavilion 1, Conference-Hall D2, Entrance D, 3rd floor.
Organizers: Mir-Expo Exhibition Company, Composite World Magazine.
There are still a few time slots left for presentations. You can book them in the corresponding section of the website.
Attendance at the conference is free for listeners, subject to prior registration on the website.
📋 The preliminary program of the Sixth scientific and practical conference "Practical aspects of using composite materials in various industries" is posted on the event website.
Date: March 26, 2025.
Venue: Moscow, Expocentre Fairgrounds, Pavilion 1, Conference-Hall D2, Entrance D, 3rd floor.
Organizers: Mir-Expo Exhibition Company, Composite World Magazine.
There are still a few time slots left for presentations. You can book them in the corresponding section of the website.
Attendance at the conference is free for listeners, subject to prior registration on the website.
Dear visitors of the exhibition "Composite-Expo 2025"!
The layouts of the exhibition in pavilions 1, 5 and 8 (hall 2) of the Expocentre Fairgrounds have been posted on the website.
You can see them in large format in the corresponding section of the website.
The layouts of the exhibition in pavilions 1, 5 and 8 (hall 2) of the Expocentre Fairgrounds have been posted on the website.
You can see them in large format in the corresponding section of the website.
Dear Exhibitors!
❗️ On the website of "Composite-Expo" in the "Documents" section, a guide for participants of the event has been posted.
Please read this information carefully and strictly follow the recommendations provided in it. This will simplify and significantly reduce the time it takes to get to and from the exhibition after the work is completed.
Sincerely, the organizing committee of the "Composite-Expo" exhibition.
❗️ On the website of "Composite-Expo" in the "Documents" section, a guide for participants of the event has been posted.
Please read this information carefully and strictly follow the recommendations provided in it. This will simplify and significantly reduce the time it takes to get to and from the exhibition after the work is completed.
Sincerely, the organizing committee of the "Composite-Expo" exhibition.
Dear visitors!
At the Composite Expo 2025 exhibition, more than 150 companies from Russia, the Republic of Belarus, China, Turkey and the Islamic Republic of Iran will present their components, technologies and equipment for the production of composite materials.
📄 The electronic catalogue of exhibitors is available on the official website of the event.
🔶 Registration to receive a free invitation ticket for the exhibition and business program.
March 25 - 27, Expocentre Fairgrounds, pavilions 1, 5, 8 (hall 2), Moscow, Russia.
At the Composite Expo 2025 exhibition, more than 150 companies from Russia, the Republic of Belarus, China, Turkey and the Islamic Republic of Iran will present their components, technologies and equipment for the production of composite materials.
📄 The electronic catalogue of exhibitors is available on the official website of the event.
🔶 Registration to receive a free invitation ticket for the exhibition and business program.
March 25 - 27, Expocentre Fairgrounds, pavilions 1, 5, 8 (hall 2), Moscow, Russia.
Dear friends!
Tomorrow Composite Expo Exhibition 2025 starts In Moscow!
More than 150 exhibitors from Russia, the Republic of Belarus, China, Turkey and the Islamic Republic of Iran will be located in pavilions 1, 5 and 8 (hall 2) of the Expocentre Fairgrounds, Moscow, Russia.
Visitors will have three days of active communication at the stands and business program events.
🕒 Exhibition opening hours:
March 25 and 26: 10:00 - 18:00
March 27: 10:00 - 16:00
🔸 Get an invitation
🔸 Venue
‼️ Attention to visitors:
due to technical reasons, the Western Entrance of the Expocentre Fairgrounds will be closed on March 25 and 26. We ask you to use the Southern Entrance and allow extra time to enter the Fairgrounds.
Some of the participants: Aviation paint and varnish technologies, BelStekloPlast, BMP Technology, Vist Composite, Volna, Glasstex, Dugalak, Eurokhim-1 Functional Additives, ETS SP, Intelligent Robot Systems, ITEKMA, Carbon Studio, Carbontex, MegaPlast, Melitek, Neva Technology, NEO Chemical, Niagara, Nortex, Peleng, Polimerprom, Polotsk-Steklovolokno, ROSATOM, Siberian analytical systems, Sibur, Tatneft-Presscomposit, F2 Innovations, Formula Carbon, KhimSnab Composite, Shelanger chemical plant Sayver, Epital ENPC, Yumateks JSC and many others.
🔸 Exhibitor Catalogue
🔸 Floor plan
Within the exhibition business program:
A Round Table "Advanced Composite Materials for Various Industries: Present and Future" will be held on March 25. Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall D2, Entrance D, 3rd floor. Opening hours: 11:00.
The 6th Scientific and Practical Conference "Practical Aspects of Composite Materials Application in Various Industries" will be held on March 26. Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall D2, Entrance D, 3rd floor. Opening hours: 10:20.
🔸 Business program
The 16th International Specialized Exhibition POLYURETHANEX 2025 will be held in parallel with COMPOSITE-EXPO from March 25 to 27 in pavilions 1, 5 and 8 of the Expocentre Fairgrounds, Moscow, Russia.
See you at the exhibitions and events of the business program!
#CompositeExpo2025 #CompositeExpo #CompositeExpoExhibition #composites #compositematerials
Tomorrow Composite Expo Exhibition 2025 starts In Moscow!
More than 150 exhibitors from Russia, the Republic of Belarus, China, Turkey and the Islamic Republic of Iran will be located in pavilions 1, 5 and 8 (hall 2) of the Expocentre Fairgrounds, Moscow, Russia.
Visitors will have three days of active communication at the stands and business program events.
🕒 Exhibition opening hours:
March 25 and 26: 10:00 - 18:00
March 27: 10:00 - 16:00
🔸 Get an invitation
🔸 Venue
‼️ Attention to visitors:
due to technical reasons, the Western Entrance of the Expocentre Fairgrounds will be closed on March 25 and 26. We ask you to use the Southern Entrance and allow extra time to enter the Fairgrounds.
Some of the participants: Aviation paint and varnish technologies, BelStekloPlast, BMP Technology, Vist Composite, Volna, Glasstex, Dugalak, Eurokhim-1 Functional Additives, ETS SP, Intelligent Robot Systems, ITEKMA, Carbon Studio, Carbontex, MegaPlast, Melitek, Neva Technology, NEO Chemical, Niagara, Nortex, Peleng, Polimerprom, Polotsk-Steklovolokno, ROSATOM, Siberian analytical systems, Sibur, Tatneft-Presscomposit, F2 Innovations, Formula Carbon, KhimSnab Composite, Shelanger chemical plant Sayver, Epital ENPC, Yumateks JSC and many others.
🔸 Exhibitor Catalogue
🔸 Floor plan
Within the exhibition business program:
A Round Table "Advanced Composite Materials for Various Industries: Present and Future" will be held on March 25. Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall D2, Entrance D, 3rd floor. Opening hours: 11:00.
The 6th Scientific and Practical Conference "Practical Aspects of Composite Materials Application in Various Industries" will be held on March 26. Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall D2, Entrance D, 3rd floor. Opening hours: 10:20.
🔸 Business program
The 16th International Specialized Exhibition POLYURETHANEX 2025 will be held in parallel with COMPOSITE-EXPO from March 25 to 27 in pavilions 1, 5 and 8 of the Expocentre Fairgrounds, Moscow, Russia.
See you at the exhibitions and events of the business program!
#CompositeExpo2025 #CompositeExpo #CompositeExpoExhibition #composites #compositematerials