Composites
Photo
Mikrosam filament production line supports Amargo tank production
Mikrosam system features will support the production of Amargo’s chemically resistant pressure vessels or hydrogen storage in industrial plants.
Consulting and production company Amargo (Koprki, Poland) is now home to Mikrosam’s (Prilep, Macedonia) newest, floor-based, state-of-the-art filament production line for chemically resistant tanks or hydrogen storage in industrial plants. Using wet-impregnated fibers, this machine can produce composite tanks in a diameter range of 200-4,300 millimeters and a length range up to 12,000 millimeters with mandrel shafts.
Amargo covers many applications through concept, project, production, delivery and full service during the whole lifetime of the tank. In addition, the company has teamed up with two technical universities — Warsaw and Wroclaw — and is working on a 3-year project entitled “Development of an intelligent construction for a composite pressure vessel with a big hinged bottom,” that will enable the company to design and produce even complex tanks using the filament method winding process.
“Amargo has been supporting many industries for over 18 years by providing chemical-resistant tanks with complete installations and the necessary additional equipment and controls,” Szczepan Gorbacz, president of the management board of Amargo, says. “When the operating conditions of the tank, including the corrosive environment, temperature and pressure, are very demanding, solutions based on materials from the thermoplastic group, e.g.. polyethylene PE100 and polypropylene PP-H, are no longer sufficient. It is then necessary to use resin tank structures and glass fiber reinforcement, preferably with the use of continuous fiber.”
Amargo chose Mikrosam for its experience, expertise, engineering support, and flexibility in equipment design and integration.
Mikrosam’s system features a filament winding machine, an impregnating bath system for deep impregnation, a fiber creel, a fiber delivery system, software for programming and a quality inspection system. It has a single spindle, four axes of interpolation and a carriage floor-based configuration. Normally, the machine uses glass fiber, but it can be converted to carbon fiber, which the company says is important, especially for high-pressure tanks and hydrogen storage tanks. A fiber delivery system guides and transports fibers up to the resin bath and mandrels with minimal fiber damage. The ceramic eyelets minimize friction between the fibers as they are guided in a precise order until they reach the resin bath. Designed for high production speed, the deep immersion bath has 32 tows (fibers) for optimal impregnation quality.
The machine is also equipped with WindingExpert software, which can generate mandrels and patterns, simulate parts, produce parts and export FEA data (e.g., Nastran, Abaqus), among other features. For advanced control, the system offers a quality control system with SCADA integration. By using this manufacturing historian, the customer monitors and controls critical filament winding parameters. This includes precise tension control of the continuous fibers, accurate resin flow control and maintaining consistent winding angles. This ensures that Amargo can guarantee high-quality, well-balanced and reliable tanks.
Along with this new installation, Amargo and technical university engineers are working to prepare special detection systems — sensors that can measure elastic waves excited by piezoelectric transmitters, installed on the outer glass fiber-reinforced polymer (GFRP) layer of the tank. As aggressive chemical agents stored under elevated pressure can cause significant damage to both people and the environment, it is essential to develop systems for early damage detection and structural integrity monitoring of such vessels. These sensors also help to reduce maintenance costs and unforeseen operational breaks.
Additionally, as part of a complete solution, Amargo is incorporating the use of digital twin solutions.
Mikrosam system features will support the production of Amargo’s chemically resistant pressure vessels or hydrogen storage in industrial plants.
Consulting and production company Amargo (Koprki, Poland) is now home to Mikrosam’s (Prilep, Macedonia) newest, floor-based, state-of-the-art filament production line for chemically resistant tanks or hydrogen storage in industrial plants. Using wet-impregnated fibers, this machine can produce composite tanks in a diameter range of 200-4,300 millimeters and a length range up to 12,000 millimeters with mandrel shafts.
Amargo covers many applications through concept, project, production, delivery and full service during the whole lifetime of the tank. In addition, the company has teamed up with two technical universities — Warsaw and Wroclaw — and is working on a 3-year project entitled “Development of an intelligent construction for a composite pressure vessel with a big hinged bottom,” that will enable the company to design and produce even complex tanks using the filament method winding process.
“Amargo has been supporting many industries for over 18 years by providing chemical-resistant tanks with complete installations and the necessary additional equipment and controls,” Szczepan Gorbacz, president of the management board of Amargo, says. “When the operating conditions of the tank, including the corrosive environment, temperature and pressure, are very demanding, solutions based on materials from the thermoplastic group, e.g.. polyethylene PE100 and polypropylene PP-H, are no longer sufficient. It is then necessary to use resin tank structures and glass fiber reinforcement, preferably with the use of continuous fiber.”
Amargo chose Mikrosam for its experience, expertise, engineering support, and flexibility in equipment design and integration.
Mikrosam’s system features a filament winding machine, an impregnating bath system for deep impregnation, a fiber creel, a fiber delivery system, software for programming and a quality inspection system. It has a single spindle, four axes of interpolation and a carriage floor-based configuration. Normally, the machine uses glass fiber, but it can be converted to carbon fiber, which the company says is important, especially for high-pressure tanks and hydrogen storage tanks. A fiber delivery system guides and transports fibers up to the resin bath and mandrels with minimal fiber damage. The ceramic eyelets minimize friction between the fibers as they are guided in a precise order until they reach the resin bath. Designed for high production speed, the deep immersion bath has 32 tows (fibers) for optimal impregnation quality.
The machine is also equipped with WindingExpert software, which can generate mandrels and patterns, simulate parts, produce parts and export FEA data (e.g., Nastran, Abaqus), among other features. For advanced control, the system offers a quality control system with SCADA integration. By using this manufacturing historian, the customer monitors and controls critical filament winding parameters. This includes precise tension control of the continuous fibers, accurate resin flow control and maintaining consistent winding angles. This ensures that Amargo can guarantee high-quality, well-balanced and reliable tanks.
Along with this new installation, Amargo and technical university engineers are working to prepare special detection systems — sensors that can measure elastic waves excited by piezoelectric transmitters, installed on the outer glass fiber-reinforced polymer (GFRP) layer of the tank. As aggressive chemical agents stored under elevated pressure can cause significant damage to both people and the environment, it is essential to develop systems for early damage detection and structural integrity monitoring of such vessels. These sensors also help to reduce maintenance costs and unforeseen operational breaks.
Additionally, as part of a complete solution, Amargo is incorporating the use of digital twin solutions.
Composites
Photo
Sicomin epoxy resins power construction of new zero-emission foiling passenger shuttle at Candela Boats
Sicomin announces its latest partnership with Candela, the renowned Swedish electric foiling boat manufacturer. Sicomin will supply a complete package of epoxy resins and adhesives for Candela’s latest ground-breaking project, the new P-12 foiling passenger shuttle.
Candela’s innovative approach to sustainable boating has generated massive international attention, and its latest vessel, the Candela P-12, is no exception. The new, zero emission, 12 metre passenger shuttle has been conceived to enable higher journey frequencies and increase utilization across urban water transit networks.
A full carbon fibre and epoxy construction results in a low vessel weight that allows Candela to provide operators with capacity for 30 passengers and a range of up to 60 nautical miles at 25 knots. Intended to replace larger, slower, fossil-fuelled ships, the P-12 uses 80% less energy than a conventional ferry whilst producing no local emissions and removing the risk of fuel or oil spillages.
The P-12 has been developed using the same lightweight, infused composite, foiling DNA for Candela’s earlier C-7 and C-8 leisure craft and is built using the same high-performance DNV-GL type approved Sicomin resins and adhesives as the previous models. Sicomin’s SR1710 epoxy infusion resin produces extremely high laminate mechanical properties and delivers excellent performance in hot and wet conditions, critical for such a lightweight foiling craft.
Sicomin’s premium epoxy adhesive, Isobond SR7200HTG is also used extensively in the P12 construction for bonding of the carbon fibre hull’s internal structure and final assembly of the vessel’s composite components. Suitable for both thick and thin bond lines, SR7200HTG provides superior bonding performance and is particularly resistant to micro-cracking in long term fatigue.
“Sicomin epoxies have helped us create the lightweight structures that give Candela vessels their game changing performance,” said Karl Fägersten, Chief Procurement Officer at Candela. “Thanks to this, we can provide fast and cost effective, more comfortable, zero emission journeys on our waterways.”
#сomposites #CompositeMaterials #Sicomin #EpoxyResin #boat
> source
Sicomin announces its latest partnership with Candela, the renowned Swedish electric foiling boat manufacturer. Sicomin will supply a complete package of epoxy resins and adhesives for Candela’s latest ground-breaking project, the new P-12 foiling passenger shuttle.
Candela’s innovative approach to sustainable boating has generated massive international attention, and its latest vessel, the Candela P-12, is no exception. The new, zero emission, 12 metre passenger shuttle has been conceived to enable higher journey frequencies and increase utilization across urban water transit networks.
A full carbon fibre and epoxy construction results in a low vessel weight that allows Candela to provide operators with capacity for 30 passengers and a range of up to 60 nautical miles at 25 knots. Intended to replace larger, slower, fossil-fuelled ships, the P-12 uses 80% less energy than a conventional ferry whilst producing no local emissions and removing the risk of fuel or oil spillages.
The P-12 has been developed using the same lightweight, infused composite, foiling DNA for Candela’s earlier C-7 and C-8 leisure craft and is built using the same high-performance DNV-GL type approved Sicomin resins and adhesives as the previous models. Sicomin’s SR1710 epoxy infusion resin produces extremely high laminate mechanical properties and delivers excellent performance in hot and wet conditions, critical for such a lightweight foiling craft.
Sicomin’s premium epoxy adhesive, Isobond SR7200HTG is also used extensively in the P12 construction for bonding of the carbon fibre hull’s internal structure and final assembly of the vessel’s composite components. Suitable for both thick and thin bond lines, SR7200HTG provides superior bonding performance and is particularly resistant to micro-cracking in long term fatigue.
“Sicomin epoxies have helped us create the lightweight structures that give Candela vessels their game changing performance,” said Karl Fägersten, Chief Procurement Officer at Candela. “Thanks to this, we can provide fast and cost effective, more comfortable, zero emission journeys on our waterways.”
#сomposites #CompositeMaterials #Sicomin #EpoxyResin #boat
> source
COMPOSITE-EXPO Exhibition is expanding!
On March 26 – 28, 2024, the main event of the composite industry - the 16th international specialized exhibition of composite materials, equipment and technologies COMPOSITE-EXPO 2024 - will take place at the Expocentre Fairgrounds in Moscow.
At the moment, the exhibition area has grown by 20%, and the number of Russian and foreign exhibitors is several times ahead of last year's figures.
❗️ Since there are no vacant spaces left in Pavilion No. 1, the exhibition will increase via Pavilion No. 5.
COMPOSITE-EXPO will feature a three-day free-to-attend exhibition with 100 exhibiting companies and 7,000 attendees from industrial end-user markets including automotive, aerospace, marine, construction, consumer appliances, furniture, oil & gas and transportation sectors.
Exhibitors confirmed on the show floor include 3D Solutions NPO, Attika, BauTex, BMP Technology, Carbon Studio, CNBM International Corporation, CS Composites LLC, Dugalak, Electroizolit, EPITAL, F2 innovations, Glasstex, Hydromania Ltd, Jiangsu Maysta Chemical Co., Ltd, ITECMA, Kombinat Kamensky FSOE, Melytec, Neva Technology, Polypark, Rusatom Steklovolokno JSC, Tatneft-Presscomposite LLC, Slantsy-Him TK, Shelangersky Chemical Plant SAIVER, Sibur, Vitrulan Tekstilglas, UTS group, VIST COMPOSITE and more!
🔸 Exhibition plan
🔸 Exhibitors list
🔸 Booking a booth at COMPOSITE-EXPO 2024 (online application)
🔸 Visit the event and business program
You can find results press release of COMPOSITE-EXPO 2023 (statistic. photos, videos etc.) at the website
COMPOSITE-EXPO will be co-located with POLYURETHANEX 2024 trade show, the 15th annual exhibition for the PU materials & equipment industry. The coalition of these two events will create a synergy of processes and solutions for all visitors that register for this unmissable gathering of an astounding 10,000 attendees expected over the three days.
On March 26 – 28, 2024, the main event of the composite industry - the 16th international specialized exhibition of composite materials, equipment and technologies COMPOSITE-EXPO 2024 - will take place at the Expocentre Fairgrounds in Moscow.
At the moment, the exhibition area has grown by 20%, and the number of Russian and foreign exhibitors is several times ahead of last year's figures.
❗️ Since there are no vacant spaces left in Pavilion No. 1, the exhibition will increase via Pavilion No. 5.
COMPOSITE-EXPO will feature a three-day free-to-attend exhibition with 100 exhibiting companies and 7,000 attendees from industrial end-user markets including automotive, aerospace, marine, construction, consumer appliances, furniture, oil & gas and transportation sectors.
Exhibitors confirmed on the show floor include 3D Solutions NPO, Attika, BauTex, BMP Technology, Carbon Studio, CNBM International Corporation, CS Composites LLC, Dugalak, Electroizolit, EPITAL, F2 innovations, Glasstex, Hydromania Ltd, Jiangsu Maysta Chemical Co., Ltd, ITECMA, Kombinat Kamensky FSOE, Melytec, Neva Technology, Polypark, Rusatom Steklovolokno JSC, Tatneft-Presscomposite LLC, Slantsy-Him TK, Shelangersky Chemical Plant SAIVER, Sibur, Vitrulan Tekstilglas, UTS group, VIST COMPOSITE and more!
🔸 Exhibition plan
🔸 Exhibitors list
🔸 Booking a booth at COMPOSITE-EXPO 2024 (online application)
🔸 Visit the event and business program
You can find results press release of COMPOSITE-EXPO 2023 (statistic. photos, videos etc.) at the website
COMPOSITE-EXPO will be co-located with POLYURETHANEX 2024 trade show, the 15th annual exhibition for the PU materials & equipment industry. The coalition of these two events will create a synergy of processes and solutions for all visitors that register for this unmissable gathering of an astounding 10,000 attendees expected over the three days.
Dear exhibitors of the Composite-Expo 2024 exhibition!
Documents are posted on the official website of the event, which must be filled out and sent to the directorate no later than the date specified therein. Timely completion of documents will ensure your comfortable arrival at the event during the construction days of the exposition.
We also draw your attention to the current participant manual.
Documents are posted on the official website of the event, which must be filled out and sent to the directorate no later than the date specified therein. Timely completion of documents will ensure your comfortable arrival at the event during the construction days of the exposition.
We also draw your attention to the current participant manual.
Composites
Photo
Dear participants and visitors of the international exhibition Composite-Expo 2024!
At the moment, the exhibition area and the number of Russian and foreign exhibitors have increased by 40% compared to last year.
Since there is no free space left on the ground floor of Pavilion No. 1 and Pavilion No. 5 of the Expocentre Fairgrounds, the exhibition exposure will increase due to the second floor of Pavilion No. 1.
> Floor plan of the 1st floor of Pavilion 1
> Floor plan of the 2nd floor of Pavilion 1
> Floor plan of pavilion 5
The following companies have already confirmed their participation at the Composite-Expo exhibition and will present their materials, equipment and new developments:
3D Solutions NPO, Attica, Vist Composite, VitaReaktiv, BauTex, BMP Technology, Vitrulan Textileglass, Glasstex, Dugalak, ETS SP, ITECMA, Carbon Studio, Kamensky FKP Plant, Composite Group, Krastsvetmet, MegaPlast, Melitek, Neva Technology, Peleng, Polimerprom, Polypark, Polotsk-Steklovolokno, Rusatom Steklovolokno JSC, Siberian Analytical Systems, Slantsy-Chem, Sibur, Tatneft-Presscomposite, Terra Composite, F2 Innovations, Formula Carbon, HimSnab Composite, Shelangersky Chemical Plant Sayver, Epital ENPC, Yumatex JSC and many others.
> Composite-Expo 2024 exhibitors list
Within the framework of the exhibition, an expanded Business program is planned, which includes
• 5th scientific and practical conference “Practical aspects of the use of composite materials in various industries”,
as well as specialized conferences and presentations by companies in the composite industry:
• New materials for construction
• Capacitive equipment and pipes made of composite materials
• Composite materials based on organosilicon compounds
• Composite and polyurethane materials for the mining industry
• Composites and polyurethanes for shipbuilding
• Thermal insulation materials
• Recycling and recycling of composites and polyurethanes
• Additive technologies for composite and polyurethane materials
• Instrumental methods for studying polymer composite materials
The business program events will take place from March 26 to March 28, 2024 in Conference Halls No. 1 and No. 2 on the second floor of Pavilion No. 1 of the Expocentre Fairgrounds, between towers “B” and “C”.
> Join the leading manufacturers and suppliers in the composite industry. Book your stand now!
> Visit the exhibition and business program events
> Venue of the exhibition
In parallel with Composite-Expo, from March 26 to 28, 2024, the 15th International Specialized Exhibition Polyurethanex 2024 will be held in pavilions 1 (1st and 2nd floors) and 5 of the Expocentre Fairgrounds.
See you at the exhibitions!
At the moment, the exhibition area and the number of Russian and foreign exhibitors have increased by 40% compared to last year.
Since there is no free space left on the ground floor of Pavilion No. 1 and Pavilion No. 5 of the Expocentre Fairgrounds, the exhibition exposure will increase due to the second floor of Pavilion No. 1.
> Floor plan of the 1st floor of Pavilion 1
> Floor plan of the 2nd floor of Pavilion 1
> Floor plan of pavilion 5
The following companies have already confirmed their participation at the Composite-Expo exhibition and will present their materials, equipment and new developments:
3D Solutions NPO, Attica, Vist Composite, VitaReaktiv, BauTex, BMP Technology, Vitrulan Textileglass, Glasstex, Dugalak, ETS SP, ITECMA, Carbon Studio, Kamensky FKP Plant, Composite Group, Krastsvetmet, MegaPlast, Melitek, Neva Technology, Peleng, Polimerprom, Polypark, Polotsk-Steklovolokno, Rusatom Steklovolokno JSC, Siberian Analytical Systems, Slantsy-Chem, Sibur, Tatneft-Presscomposite, Terra Composite, F2 Innovations, Formula Carbon, HimSnab Composite, Shelangersky Chemical Plant Sayver, Epital ENPC, Yumatex JSC and many others.
> Composite-Expo 2024 exhibitors list
Within the framework of the exhibition, an expanded Business program is planned, which includes
• 5th scientific and practical conference “Practical aspects of the use of composite materials in various industries”,
as well as specialized conferences and presentations by companies in the composite industry:
• New materials for construction
• Capacitive equipment and pipes made of composite materials
• Composite materials based on organosilicon compounds
• Composite and polyurethane materials for the mining industry
• Composites and polyurethanes for shipbuilding
• Thermal insulation materials
• Recycling and recycling of composites and polyurethanes
• Additive technologies for composite and polyurethane materials
• Instrumental methods for studying polymer composite materials
The business program events will take place from March 26 to March 28, 2024 in Conference Halls No. 1 and No. 2 on the second floor of Pavilion No. 1 of the Expocentre Fairgrounds, between towers “B” and “C”.
> Join the leading manufacturers and suppliers in the composite industry. Book your stand now!
> Visit the exhibition and business program events
> Venue of the exhibition
In parallel with Composite-Expo, from March 26 to 28, 2024, the 15th International Specialized Exhibition Polyurethanex 2024 will be held in pavilions 1 (1st and 2nd floors) and 5 of the Expocentre Fairgrounds.
See you at the exhibitions!
Dear Visitors and Exhibitors!
16th Composite-Expo Exhibition 2024 starts in a week!
International Trade Show for the entire composites supply chain bringing together composites manufacturers, raw chemical providers, equipment and service providers with thousands of buyers across the supply chain and technical end-user markets.
The exhibition area and the number of Russian and foreign exhibitors increased by 40% compared to last year. This year the exhibition occupied 2 pavilions: 1 (1st and 2nd floors) and 5.
🔸 Exhibition floor plan
COMPOSITE-EXPO will feature a three-day free-to-attend exhibition with 180 exhibiting companies and 9,000 attendees from industrial end-user markets including automotive, aerospace, marine, construction, consumer appliances, furniture, oil & gas and transportation sectors. Exhibitors confirmed on the show floor include Bang & Bonsomer, BauTex, Dugalak, Eskim Kimya Sanayi ve Ticaret A.S., Ece Boya Kimya, MIREA - Russian Technological University, P-D Tatneft-Alabuga Steklovolokno, SIBUR Holding JSC, BMP Technology, Melytec, and more!
🔸 Exhibitor list
Within the business program of COMPOSITE-EXPO 27 March 2024 there will be held:
Practical uses of composite materials in different industries (5th R&D Conference).
🔸 Conference program
🔶 Visit the event and business program
🔸 Venue
🕘 Exhibition opening hours:
March 26 and 27: 10.00 - 18.00
March 28: 10.00 - 16.00
COMPOSITE-EXPO will be co-located with POLYURETHANEX 2024 trade show, for the 15th annual exhibition for the PU materials & equipment industry. The coalition of these two events will create a synergy of processes and solutions for all visitors that register for this unmissable gathering of an astounding 15,000 attendees expected over the three days.
See you at the Exhibitions!
16th Composite-Expo Exhibition 2024 starts in a week!
International Trade Show for the entire composites supply chain bringing together composites manufacturers, raw chemical providers, equipment and service providers with thousands of buyers across the supply chain and technical end-user markets.
The exhibition area and the number of Russian and foreign exhibitors increased by 40% compared to last year. This year the exhibition occupied 2 pavilions: 1 (1st and 2nd floors) and 5.
🔸 Exhibition floor plan
COMPOSITE-EXPO will feature a three-day free-to-attend exhibition with 180 exhibiting companies and 9,000 attendees from industrial end-user markets including automotive, aerospace, marine, construction, consumer appliances, furniture, oil & gas and transportation sectors. Exhibitors confirmed on the show floor include Bang & Bonsomer, BauTex, Dugalak, Eskim Kimya Sanayi ve Ticaret A.S., Ece Boya Kimya, MIREA - Russian Technological University, P-D Tatneft-Alabuga Steklovolokno, SIBUR Holding JSC, BMP Technology, Melytec, and more!
🔸 Exhibitor list
Within the business program of COMPOSITE-EXPO 27 March 2024 there will be held:
Practical uses of composite materials in different industries (5th R&D Conference).
🔸 Conference program
🔶 Visit the event and business program
🔸 Venue
🕘 Exhibition opening hours:
March 26 and 27: 10.00 - 18.00
March 28: 10.00 - 16.00
COMPOSITE-EXPO will be co-located with POLYURETHANEX 2024 trade show, for the 15th annual exhibition for the PU materials & equipment industry. The coalition of these two events will create a synergy of processes and solutions for all visitors that register for this unmissable gathering of an astounding 15,000 attendees expected over the three days.
See you at the Exhibitions!
Composite-Expo
Exhibitors List 2026
Composite-Expo 2026 Exhibitors List
Dear participants and visitors of the Composite-Expo 2024 Exhibition!
We would like to inform you that at the moment there are no decisions of executive authorities to cancel / postpone the event.
The exhibition will be held on the scheduled dates (March 26 - 28).
Best regards, exhibition management!
We would like to inform you that at the moment there are no decisions of executive authorities to cancel / postpone the event.
The exhibition will be held on the scheduled dates (March 26 - 28).
Best regards, exhibition management!
Composites
Photo
Dear friends!
Composite-Expo 2024 starts today!
‼️ Please note: due to security measures, the passage time to the territory of the Expocentre Fairgrounds may be increased. Please take this into account when planning your visit to the exhibition.
The main event of the composite industry will be held at the Expocentre Fairgrounds for the 16th time. More than 180 exhibitors from different countries will be located in pavilions 1 (1st, 2nd floors) and 5. Visitors will enjoy three days of active communication at stands and business program events.
🕒 Exhibition opening hours:
March 26 and 27: 10.00 - 18.00
March 27: 10.00 - 16.00
🔸 Get an invitation card
🔸 Venue
Some of the participants: Attica, Vist Composite, VitaReaktiv, BauTex, BMP Technology, Vitrulan Textileglass, Glasstex, Dugalak, ETS SP, ITECMA, Carbon Studio, Kamensky FKP Plant, Composite Group, MegaPlast, Melitek, Neva Technology, Peleng, Polimerprom, Polipark , Polotsk-Steklovolokno, Rusatom Steklovolokno JSC, Siberian Analytical Systems, Slantsy-Chem, Sibur, Tatneft-Presscomposite, Terra Composite, F2 Innovations, Formula Carbon, HimSnab Composite, Shelangersky Chemical Plant Sayver, Epital ENPC, Umatex JSC and many others.
🔸 Exhibitors catalogue
🔸 Exhibition floor plan
As part of the business program of the exhibition, the 5th scientific and practical conference “Practical aspects of the use of composite materials in various industries” will be held on March 27.
Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall 2, 2nd floor (between towers B and C). Work starts at 10.30.
🔸 Conference program
In parallel with COMPOSITE-EXPO, from March 26 to 28, the 15th International Specialized Exhibition POLYURETHANEX 2024 will be held in pavilions 1 and 5 of the Expocentre Fairgrounds. The predicted number of event visitors is 15,000 specialists over three days.
See you at exhibitions and business program events!
#CompositeExpo2024 #CompositeExpo #ExhibitionCompositeExpo #composites #compositematerials
Composite-Expo 2024 starts today!
‼️ Please note: due to security measures, the passage time to the territory of the Expocentre Fairgrounds may be increased. Please take this into account when planning your visit to the exhibition.
The main event of the composite industry will be held at the Expocentre Fairgrounds for the 16th time. More than 180 exhibitors from different countries will be located in pavilions 1 (1st, 2nd floors) and 5. Visitors will enjoy three days of active communication at stands and business program events.
🕒 Exhibition opening hours:
March 26 and 27: 10.00 - 18.00
March 27: 10.00 - 16.00
🔸 Get an invitation card
🔸 Venue
Some of the participants: Attica, Vist Composite, VitaReaktiv, BauTex, BMP Technology, Vitrulan Textileglass, Glasstex, Dugalak, ETS SP, ITECMA, Carbon Studio, Kamensky FKP Plant, Composite Group, MegaPlast, Melitek, Neva Technology, Peleng, Polimerprom, Polipark , Polotsk-Steklovolokno, Rusatom Steklovolokno JSC, Siberian Analytical Systems, Slantsy-Chem, Sibur, Tatneft-Presscomposite, Terra Composite, F2 Innovations, Formula Carbon, HimSnab Composite, Shelangersky Chemical Plant Sayver, Epital ENPC, Umatex JSC and many others.
🔸 Exhibitors catalogue
🔸 Exhibition floor plan
As part of the business program of the exhibition, the 5th scientific and practical conference “Practical aspects of the use of composite materials in various industries” will be held on March 27.
Venue: Expocentre Fairgrounds, Pavilion 1, Conference Hall 2, 2nd floor (between towers B and C). Work starts at 10.30.
🔸 Conference program
In parallel with COMPOSITE-EXPO, from March 26 to 28, the 15th International Specialized Exhibition POLYURETHANEX 2024 will be held in pavilions 1 and 5 of the Expocentre Fairgrounds. The predicted number of event visitors is 15,000 specialists over three days.
See you at exhibitions and business program events!
#CompositeExpo2024 #CompositeExpo #ExhibitionCompositeExpo #composites #compositematerials