小爱翻译_4.7.1.apk
87.4 MB
#小爱翻译 #Mi_AI_Translate
#提取版 #HyperOS
提取机型:#k70e #duchamp
机型系统:#正式版 #1.0.13.0
target api:34 min api:28
arm64-v8a
VersionCode:405007001
mtk机型的版本,请安装适合自己的机型而不是随意安装
#提取版 #HyperOS
提取机型:#k70e #duchamp
机型系统:#正式版 #1.0.13.0
target api:34 min api:28
arm64-v8a
VersionCode:405007001
mtk机型的版本,请安装适合自己的机型而不是随意安装
👍2❤1
Forwarded from KernelSU
KernelSU now supports installation through kernel modules (LKM) (GKI Only), you can use it with official kernels or third-party kernels; at the same time, the manager has also added installation functionality, you can choose to patch files, install directly, or install after OTA. Regarding the new LKM installation method, there are some tips:
1. LKM does not support non-GKI kernels, and will not support them in the future;
2. When patching files, if the
3. If you have already installed the GKI kernel provided by KernelSU and want to switch to the LKM method, you need to flash back to the stock kernel; if your device has an
4. The installation method of GKI kernel and LKM will always exist, use whichever you like; in the future, it will also support flashing GKI kernel in the manager.
https://github.com/tiann/KernelSU/releases/tag/v0.9.0
1. LKM does not support non-GKI kernels, and will not support them in the future;
2. When patching files, if the
init_boot partition exists, you should choose to patch init_boot; otherwise, patch boot;3. If you have already installed the GKI kernel provided by KernelSU and want to switch to the LKM method, you need to flash back to the stock kernel; if your device has an
init_boot partition, you can directly flash back to the stock boot;4. The installation method of GKI kernel and LKM will always exist, use whichever you like; in the future, it will also support flashing GKI kernel in the manager.
https://github.com/tiann/KernelSU/releases/tag/v0.9.0
👍17🎉3
android14-6.1-lts.ko
226.7 KB
分别跑了下 v0.9.0-11631 的
android14-6.1-2023-06
android14-6.1-2024-03
android14-6.1-lts
有需要的话可以自己下载来用
跑 2023-06 是因为 Xiaomi 14 目前原厂内核就是 2023-06 的
评论区会放一下给 Xiaomi 14 1.0.32.0 缝补好的 boot 和 init_boot
android14-6.1-2023-06
android14-6.1-2024-03
android14-6.1-lts
有需要的话可以自己下载来用
跑 2023-06 是因为 Xiaomi 14 目前原厂内核就是 2023-06 的
评论区会放一下给 Xiaomi 14 1.0.32.0 缝补好的 boot 和 init_boot
👍10
小爱同学_6.150.1.5621.apk
110.4 MB
#小爱同学 #小爱语音 #Mi_AI
#HyperOS #内测版
target api:33 min api:21
arm64-v8a, armeabi-v7a
亲爱的用户:
恭喜顺利加入小爱同学多模态功能内测!
在正式体验多模态功能之前,请您先阅读以下内测须知,帮您更好地进行内测。
一、版本要求
1. 升级MIUI最新开发版或稳定版;
2. 安装小米社区推送的支持多模态功能的“小爱同学”V6.150安装包(多模态内测圈顶部);
二、体验多模态功能
1. 体验方法
step1 唤醒小爱同学后,点击左下角的+号,拍照或上传一张图片
step2 同时发送图片问答、图标编辑 相关指令即可
>> 图片问答:描述下这张图片等
>> 图片编辑:帮我把这张图扩大、把路人消除掉
2. 注意事项:
1) 图片问答场景的大模型回复可能会不准确
2) 路人消除暂不支持自定义消除主体
3) AI扩图目前只支持1-2倍之间的倍数进行扩图
三、提交反馈
>>小米社区【小爱同学大模型】内测圈子发帖反馈。
我们非常期待您能提多模态相关问题和建议。
我们期待您的体验,一起打造行业最领先的“多模态”体验。
#HyperOS #内测版
target api:33 min api:21
arm64-v8a, armeabi-v7a
亲爱的用户:
恭喜顺利加入小爱同学多模态功能内测!
在正式体验多模态功能之前,请您先阅读以下内测须知,帮您更好地进行内测。
一、版本要求
1. 升级MIUI最新开发版或稳定版;
2. 安装小米社区推送的支持多模态功能的“小爱同学”V6.150安装包(多模态内测圈顶部);
二、体验多模态功能
1. 体验方法
step1 唤醒小爱同学后,点击左下角的+号,拍照或上传一张图片
step2 同时发送图片问答、图标编辑 相关指令即可
>> 图片问答:描述下这张图片等
>> 图片编辑:帮我把这张图扩大、把路人消除掉
2. 注意事项:
1) 图片问答场景的大模型回复可能会不准确
2) 路人消除暂不支持自定义消除主体
3) AI扩图目前只支持1-2倍之间的倍数进行扩图
三、提交反馈
>>小米社区【小爱同学大模型】内测圈子发帖反馈。
我们非常期待您能提多模态相关问题和建议。
我们期待您的体验,一起打造行业最领先的“多模态”体验。
👍10