eyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.
1610/1630
*#170602112302# (software version)
1610/1611
IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #
2110
*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model)*#682371158412125# (software version)
NOKIA3110
*#06# -IMEI
*#3110# -Software version
##002# - allows to turn off voice mail.
*#7780# - restore factory settings
*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)
*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:
6232 (OK)displays month and year of production date (ie "0198")
7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")
7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")
9268 (OK) -displays serial number
37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !
87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)
* # 9 2 7 0 2 6 8 9 # -Simlock info
*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)
*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)
*#77# (call) -(work s only in some networks)
*#33/35# (call -displays message "Service not active".
**31# (call) -your no. will not be showed to others when you make a call
3210
*#06# -IMEI
*#0000# -software version
*#92702689# (or *#war0anty#)- enters service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system Enhanced Full Rate .
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
xx# -Replace xx with desired phonebook entry - press # and you will see it on display.
51XX
*#06# -IMEI
*#0000# - Software version
*#92702689#( or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
#pw+1234567890+1 -provider lock status
#pw+1234567890+2 -Network lock status
#pw+1234567890+3 -Provider lock status
#pw+1234567890+4 - SimCard lock status
NOKIA 61XX
*#06# -IMEI
*#0000# ;-*#99 99# (Nokia 6130)
*#92702689# (or *#war0anty#) Software versionEnter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
NOKIA8810
*#06# - IMEI
*#0000# -Software version
*#92702689# (or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy
#4720# -Turns off battery save mode - saves about 30 % of energy
NOKIA99OO
*#06# -IMEI
*#682371158412125# -Software version
*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.
NOKIA 911O
*#06# IMEI
*#0000# SOFTWARE VERSION
*3370# Turns on sound encoding system - Enhanced Full Rate.
#3370# Turns off sound encoding system - Enhanced Full Rate.
*4720# Turns on battery save mode - saves about 30 % of energy.
#4720# Turns off battery save mode.
NOKIA 81XX
*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display
*#92702689# (or *#warOanty#)
"Warranty code:" - you have to enter one of the following codes:
9268 (OK) displays IMEI (International Mobile Equipment Identification)
1610/1630
*#170602112302# (software version)
1610/1611
IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #
2110
*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model)*#682371158412125# (software version)
NOKIA3110
*#06# -IMEI
*#3110# -Software version
##002# - allows to turn off voice mail.
*#7780# - restore factory settings
*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)
*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:
6232 (OK)displays month and year of production date (ie "0198")
7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")
7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")
9268 (OK) -displays serial number
37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !
87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)
* # 9 2 7 0 2 6 8 9 # -Simlock info
*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)
*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)
*#77# (call) -(work s only in some networks)
*#33/35# (call -displays message "Service not active".
**31# (call) -your no. will not be showed to others when you make a call
3210
*#06# -IMEI
*#0000# -software version
*#92702689# (or *#war0anty#)- enters service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system Enhanced Full Rate .
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
xx# -Replace xx with desired phonebook entry - press # and you will see it on display.
51XX
*#06# -IMEI
*#0000# - Software version
*#92702689#( or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
#pw+1234567890+1 -provider lock status
#pw+1234567890+2 -Network lock status
#pw+1234567890+3 -Provider lock status
#pw+1234567890+4 - SimCard lock status
NOKIA 61XX
*#06# -IMEI
*#0000# ;-*#99 99# (Nokia 6130)
*#92702689# (or *#war0anty#) Software versionEnter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
NOKIA8810
*#06# - IMEI
*#0000# -Software version
*#92702689# (or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy
#4720# -Turns off battery save mode - saves about 30 % of energy
NOKIA99OO
*#06# -IMEI
*#682371158412125# -Software version
*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.
NOKIA 911O
*#06# IMEI
*#0000# SOFTWARE VERSION
*3370# Turns on sound encoding system - Enhanced Full Rate.
#3370# Turns off sound encoding system - Enhanced Full Rate.
*4720# Turns on battery save mode - saves about 30 % of energy.
#4720# Turns off battery save mode.
NOKIA 81XX
*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display
*#92702689# (or *#warOanty#)
"Warranty code:" - you have to enter one of the following codes:
9268 (OK) displays IMEI (International Mobile Equipment Identification)
6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)
7832 (OK) displays date of purchase
7332 (OK) displays date of repair or upgrade
37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!
87267 (OK) transmits user data/move data do service PC
Motorola Codes:
Motorola 920
---------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
Motorola 930
--------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola 930
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
Motorola 6200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
UK (Orange)
AU
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 7500
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
7832 (OK) displays date of purchase
7332 (OK) displays date of repair or upgrade
37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!
87267 (OK) transmits user data/move data do service PC
Motorola Codes:
Motorola 920
---------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
Motorola 930
--------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola 930
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
Motorola 6200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
UK (Orange)
AU
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 7500
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
IT (model: F16 HW: 5.2 SW: 2.1)
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin
Motorola 8200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8400
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8700
--------------
*#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
IT (model: F16 HW: 5.2 SW: 2.1)
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin
Motorola 8200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8400
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8700
--------------
*#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Motorola CD 160
---------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola CD 520
----------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola d460
--------------
#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Motorola V3688
---------------
#06# for checking the IMEI (International Mobile Equipment Identity)
Enhanced Full Rate Codec (EFR):
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
These countries has been reported working:
AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Motorola CD 160
---------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola CD 520
----------------
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola d460
--------------
#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.
What's the use of RBS:
Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.
Motorola V3688
---------------
#06# for checking the IMEI (International Mobile Equipment Identity)
Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK
NOTE: Nothing appears on Screen.
Ericsson Mobile Secret Codes:
T10
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!
A way to (un)lock your cell phone on to the network(subset):
1. Press <<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network
Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
T18
*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
To access SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you may lock your phone.
Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
T28
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
To Disable EFR press [][][] 119 [] 0 [] OK
NOTE: Nothing appears on Screen.
Ericsson Mobile Secret Codes:
T10
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!
A way to (un)lock your cell phone on to the network(subset):
1. Press <<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network
Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
T18
*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
To access SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you may lock your phone.
Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
T28
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Message Report
When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
388
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following: type 04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again.
GA628
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Message Report
When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
388
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Access menu without Sim card ...
To access to the menu in your phone without having a card inside do the following: type 04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again.
GA628
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again.
Alarm Clock Menu
Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.
An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.
Free phone calls using the GA628
This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!
Another variant of the code
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youΒ΄ll have to take your battery out to turn the phone on again.
Alarm Clock Menu
Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.
An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.
Free phone calls using the GA628
This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!
Another variant of the code
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦NEW MOBILES SECRET CODES :
Field Mode: *3001#12345#*
Type *3001#12345#* into your phone's dialer and then press the green call button to access "Field Mode," which can give you access to info about local networks and cell towers.
You'll probably never ever have to know about your local cell tower's "Measured RSSi," but it's fun to look around for a bit.
General Test Mode: *#0*#
It works on Android. This prompts a library of different phone operations, which could be operated with a single push (e.g. Sleep, Front Cam, Vibration).
Display your IMEI: *#06#
To access it, type in the above code, and then the green call button to prompt your IMEI number.
The IMEI is unique to your device. Among other things, the number can help "blacklist" stolen devices or help with customer support.
Check Your Call Forwarding: *#67#
This code allows you to check which number your phone is currently forwarding calls to when you're busy or reject a call.
By default, this is probably your carrier's voicemail service, but you can change it to forward to a different number (a home number, office number, or third-party answering service for example). On an iPhone, you can change this number by going to Settings > Phone > Call Forwarding. On Android (varies from system to system), tap the Phone app > hamburger icon > Settings > Call > More Settings > Call forwarding
Get Even More Info on Call Forwarding: *#61#
On Galaxy phone, this code prompted a pop-up that explain how long until a call is forwarded to the message center. On the iPhone, regardless of carrier, this code just show the same info as *#67# .
Check Your Available Minutes: *646#
Apparently this one only works on postpaid plans. It work on Galaxy phone. Instead of showing the info on a new screen, it send to the phone a text message.
Check Your Bill Balance: *225#
On Android it prompt a SMS message with current balance due.
Hide Your Phone From Caller ID: #31#
Works on Android. But entering this code prompted a pop-up stating that Caller ID had been disabled. In order to re-instate Caller ID, enter *31# .
Check Your Billing Cycle: *3282#
Works on Android. It prompt an SMS message with billing info.
SMS Message Center: *5005*7672#
This code will tell you your SMS message center number.
Activate Call Waiting: *43#
This code will activate call waiting; you can deactivate it by entering #43#.
Quick Test Menu (Samsung Galaxy Only) *#7353#
This code only works on Samsung Galaxy models. This is similar to the General Test mode mentioned earlier, in that it brings up a menu with a number of one-tap test prompts.
Firmware (Samsung Galaxy Only) *#1234#
Only works on Galaxy devices. But it will let you know your phone's current firmware. So, have fun with that.
Codes working with most of cell phones
These code should work with most cell phones. Some may not be usable depending on the provider.
π¦NEW MOBILES SECRET CODES :
Field Mode: *3001#12345#*
Type *3001#12345#* into your phone's dialer and then press the green call button to access "Field Mode," which can give you access to info about local networks and cell towers.
You'll probably never ever have to know about your local cell tower's "Measured RSSi," but it's fun to look around for a bit.
General Test Mode: *#0*#
It works on Android. This prompts a library of different phone operations, which could be operated with a single push (e.g. Sleep, Front Cam, Vibration).
Display your IMEI: *#06#
To access it, type in the above code, and then the green call button to prompt your IMEI number.
The IMEI is unique to your device. Among other things, the number can help "blacklist" stolen devices or help with customer support.
Check Your Call Forwarding: *#67#
This code allows you to check which number your phone is currently forwarding calls to when you're busy or reject a call.
By default, this is probably your carrier's voicemail service, but you can change it to forward to a different number (a home number, office number, or third-party answering service for example). On an iPhone, you can change this number by going to Settings > Phone > Call Forwarding. On Android (varies from system to system), tap the Phone app > hamburger icon > Settings > Call > More Settings > Call forwarding
Get Even More Info on Call Forwarding: *#61#
On Galaxy phone, this code prompted a pop-up that explain how long until a call is forwarded to the message center. On the iPhone, regardless of carrier, this code just show the same info as *#67# .
Check Your Available Minutes: *646#
Apparently this one only works on postpaid plans. It work on Galaxy phone. Instead of showing the info on a new screen, it send to the phone a text message.
Check Your Bill Balance: *225#
On Android it prompt a SMS message with current balance due.
Hide Your Phone From Caller ID: #31#
Works on Android. But entering this code prompted a pop-up stating that Caller ID had been disabled. In order to re-instate Caller ID, enter *31# .
Check Your Billing Cycle: *3282#
Works on Android. It prompt an SMS message with billing info.
SMS Message Center: *5005*7672#
This code will tell you your SMS message center number.
Activate Call Waiting: *43#
This code will activate call waiting; you can deactivate it by entering #43#.
Quick Test Menu (Samsung Galaxy Only) *#7353#
This code only works on Samsung Galaxy models. This is similar to the General Test mode mentioned earlier, in that it brings up a menu with a number of one-tap test prompts.
Firmware (Samsung Galaxy Only) *#1234#
Only works on Galaxy devices. But it will let you know your phone's current firmware. So, have fun with that.
Codes working with most of cell phones
These code should work with most cell phones. Some may not be usable depending on the provider.
Code Function
press 1 for longer than one second Dial mailbox number (mailbox number must bve specified in the settings)
press # for longer than one seconds Activate/deactivate silent profile
*#0*# Can get into the service menu on modern smartphones
*#06# Display the IMEI (International Mobile Equipment Identity)
#31#[number][dial] Dial with own number being not displayed (replace [number] with the number to dial)
*31#[number][dial] Dial with own number being dispalyed (replace [number] with the number to dial)
*#33*[dial] Show status call locks
*43#[dial] Turn on tall waiting
#43#[dial] Turn off call waiting
*#43#[dial] Show status of call waiting
*135#[dia] Request own number (often does not work)
**04*[old Pin]*[new Pin]*[new Pin]# Change Pin (do not enter [ and ])
**05*[PUK]*[neue Pin]*[neue Pin]# Unlock Pin (do not enter [ and ])
**042*[old Pin2]*[new Pin2]*[new Pin2]# Change Pin2 (do not enter [ and ])
**052*[PUK]*[new Pin2]*[new Pin2]# Unlock Pin2 (do not enter [ and ])
*#0000# Display Software Version (Nokia and Samsung devices)
Codes for charges:
Codes Function
*100#[Dial] Request number and balance (Prepaid)
*101#[Dial] Request number and balance (Prepaid)
SMS:
Send SMS delayed:
Enter at the start of the SMS the text
*Later [seconds]#
and replace [secconds] with a number e.g. 10 for 10 seconds
Examplel:
*Later 30#Hello see you soon
Do not forget the space between later and the seconds!
This does not work with all providers.
Android Generic Hidden Codes
To enter these codes just pull up the default dialer app and use your chubby fingers to press the correct buttons.
Code Description
*#*#4636#*#* Display information about Phone, Battery and Usage statistics
*#*#7780#*#* Restting your phone to factory state-Only deletes application data and applications
*2767*3855# Itβs a complete wiping of your mobile also it reinstalls the phones firmware
*#*#34971539#*#* Shows completes information about the camera
*#*#7594#*#* Changing the power button behavior-Enables direct poweroff once the code enabled
*#*#273283*255*663282*#*#* For a quick backup to all your media files
*#*#197328640#*#* Enabling test mode for service activity
*#*#232339#*#* OR *#*#526#*#* Wireless Lan Tests
*#*#232338#*#* Displays Wi-Fi Mac-address
*#*#1472365#*#* For a quick GPS test
*#*#1575#*#* A Different type GPS test
*#*#0283#*#* Packet Loopback test
*#*#0*#*#* LCD display test
*#*#0673#*#* OR *#*#0289#*#* Audio test
*#*#0842#*#* Vibration and Backlight test
*#*#2663#*#* Displays touch-screen version
*#*#2664#*#* Touch-Screen test
*#9090# Diagnostic configuration
*#872564# USB logging control
*#301279# HSDPA/HSUPA Control Menu
*2767*3855# Format device to factory state
*#9900# System dump mode
*#*#7780#*#* Reset the /data partition to factory state
*#7465625# Access phone lock status
*#12580*369# Software and hardware details
*#*#0588#*#* Proximity sensor test
*#*#3264#*#* Ram version
*#*#232331#*#* Bluetooth test
*#*#7262626#*#* Field test
*#*#232337#*# Displays bluetooth device address
*#*#8255#*#* For Google Talk service monitoring
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
*#*#1111#*#* FTA Software version
*#*#2222#*#* FTA Hardware verion
*#*#44336#*#* Displays Build time and change list number
*#06# Displsys IMEI number
*#*#8351#*#* Enables voice dialing logging mode
*#*#8350#*#* Disables voice dialing logging mode
##778 (+call) Brings up Epst menu
Testing Menu Code
The *#*#4636#*#* code is the most common one that people will use. Thereβs quite a bit of information you can pull up in this hidden menu.
press 1 for longer than one second Dial mailbox number (mailbox number must bve specified in the settings)
press # for longer than one seconds Activate/deactivate silent profile
*#0*# Can get into the service menu on modern smartphones
*#06# Display the IMEI (International Mobile Equipment Identity)
#31#[number][dial] Dial with own number being not displayed (replace [number] with the number to dial)
*31#[number][dial] Dial with own number being dispalyed (replace [number] with the number to dial)
*#33*[dial] Show status call locks
*43#[dial] Turn on tall waiting
#43#[dial] Turn off call waiting
*#43#[dial] Show status of call waiting
*135#[dia] Request own number (often does not work)
**04*[old Pin]*[new Pin]*[new Pin]# Change Pin (do not enter [ and ])
**05*[PUK]*[neue Pin]*[neue Pin]# Unlock Pin (do not enter [ and ])
**042*[old Pin2]*[new Pin2]*[new Pin2]# Change Pin2 (do not enter [ and ])
**052*[PUK]*[new Pin2]*[new Pin2]# Unlock Pin2 (do not enter [ and ])
*#0000# Display Software Version (Nokia and Samsung devices)
Codes for charges:
Codes Function
*100#[Dial] Request number and balance (Prepaid)
*101#[Dial] Request number and balance (Prepaid)
SMS:
Send SMS delayed:
Enter at the start of the SMS the text
*Later [seconds]#
and replace [secconds] with a number e.g. 10 for 10 seconds
Examplel:
*Later 30#Hello see you soon
Do not forget the space between later and the seconds!
This does not work with all providers.
Android Generic Hidden Codes
To enter these codes just pull up the default dialer app and use your chubby fingers to press the correct buttons.
Code Description
*#*#4636#*#* Display information about Phone, Battery and Usage statistics
*#*#7780#*#* Restting your phone to factory state-Only deletes application data and applications
*2767*3855# Itβs a complete wiping of your mobile also it reinstalls the phones firmware
*#*#34971539#*#* Shows completes information about the camera
*#*#7594#*#* Changing the power button behavior-Enables direct poweroff once the code enabled
*#*#273283*255*663282*#*#* For a quick backup to all your media files
*#*#197328640#*#* Enabling test mode for service activity
*#*#232339#*#* OR *#*#526#*#* Wireless Lan Tests
*#*#232338#*#* Displays Wi-Fi Mac-address
*#*#1472365#*#* For a quick GPS test
*#*#1575#*#* A Different type GPS test
*#*#0283#*#* Packet Loopback test
*#*#0*#*#* LCD display test
*#*#0673#*#* OR *#*#0289#*#* Audio test
*#*#0842#*#* Vibration and Backlight test
*#*#2663#*#* Displays touch-screen version
*#*#2664#*#* Touch-Screen test
*#9090# Diagnostic configuration
*#872564# USB logging control
*#301279# HSDPA/HSUPA Control Menu
*2767*3855# Format device to factory state
*#9900# System dump mode
*#*#7780#*#* Reset the /data partition to factory state
*#7465625# Access phone lock status
*#12580*369# Software and hardware details
*#*#0588#*#* Proximity sensor test
*#*#3264#*#* Ram version
*#*#232331#*#* Bluetooth test
*#*#7262626#*#* Field test
*#*#232337#*# Displays bluetooth device address
*#*#8255#*#* For Google Talk service monitoring
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
*#*#1111#*#* FTA Software version
*#*#2222#*#* FTA Hardware verion
*#*#44336#*#* Displays Build time and change list number
*#06# Displsys IMEI number
*#*#8351#*#* Enables voice dialing logging mode
*#*#8350#*#* Disables voice dialing logging mode
##778 (+call) Brings up Epst menu
Testing Menu Code
The *#*#4636#*#* code is the most common one that people will use. Thereβs quite a bit of information you can pull up in this hidden menu.
Call diversion
Call diversion when busy:
Code Funktion
**67*number# Divert to the given number
#67# deactivate call diversion
##67# Erase call diversion
*#67# Request status for call diversion
Call diversion in case the handset is turned off or has not coverage:
Code Function
**62*number# Divert to the given number
#62# deactivate call diversion
##62# Erase call diversion
*#62# Request status for call diversion
Call diversion for not responding
Code Function
**61*number**x# Divert to the given number aber x seconds (x=5,10,15,20,25,30)
#61# Deactivate call diversion
##61# Erase call diversion
*#61# Request status of call diversion
Call diversion for all conditions above:
Code Function
*#004*number# Divert to the given number
#004# Deactivate call diversion
##004# Erase call diversion
*#004# Request status for call diversion
Always divert:
Code Function
*#21*number# Always divert to given number
#21# Deactivate call diversion
##21# Erase call diversion
*#21# Request status for call diversion
Erase all call diversions:
Code Function
##002#[dial] Remove all call diversions
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
Call diversion when busy:
Code Funktion
**67*number# Divert to the given number
#67# deactivate call diversion
##67# Erase call diversion
*#67# Request status for call diversion
Call diversion in case the handset is turned off or has not coverage:
Code Function
**62*number# Divert to the given number
#62# deactivate call diversion
##62# Erase call diversion
*#62# Request status for call diversion
Call diversion for not responding
Code Function
**61*number**x# Divert to the given number aber x seconds (x=5,10,15,20,25,30)
#61# Deactivate call diversion
##61# Erase call diversion
*#61# Request status of call diversion
Call diversion for all conditions above:
Code Function
*#004*number# Divert to the given number
#004# Deactivate call diversion
##004# Erase call diversion
*#004# Request status for call diversion
Always divert:
Code Function
*#21*number# Always divert to given number
#21# Deactivate call diversion
##21# Erase call diversion
*#21# Request status for call diversion
Erase all call diversions:
Code Function
##002#[dial] Remove all call diversions
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Previously-0day exploit from the Hacking Team leak, written by Eugene Ching/Qavar.
t.me/UndercodeTesting
π¦Exploit "raw bytes".
1) We ultimately want to inject the exploit into the target's memory, and directly run it. In order to do that, we need to inject only the relevant instructions (opcodes) and the necessary data.
2) Hence, we extract the code segment (the opcodes) from PIC.exe, and append the necessary data (the malformed font, font-data.bin) into a sequence of bytes.
3) This produces the "raw bytes" that we can directly inject into the target and call CreateRemoteThread() on.
4) This process is automated through the Python script named make-raw-bytes.py. The output is raw-bytes.bin.
π¦Injection into target.
To convert the "raw bytes" into an .exe that actually injects the "raw bytes" into a target, we need to call WriteProcessMemory() & CreateRemoteThread().
1) This process is handled by make-injector-cpp.py. The output is injector.cpp, a piece of code which, when compiled, takes a target PID and executes the exploit.
2) Convenience wrapper.
As a convenience, make.bat will produce injector.exe directly by performing the steps described above.
> In other words, make.bat will:
make-raw-bytes.py
make-injector-cpp.py
build injector.exe
π¦download :
> https://github.com/vlad902/hacking-team-windows-kernel-lpe
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Previously-0day exploit from the Hacking Team leak, written by Eugene Ching/Qavar.
t.me/UndercodeTesting
π¦Exploit "raw bytes".
1) We ultimately want to inject the exploit into the target's memory, and directly run it. In order to do that, we need to inject only the relevant instructions (opcodes) and the necessary data.
2) Hence, we extract the code segment (the opcodes) from PIC.exe, and append the necessary data (the malformed font, font-data.bin) into a sequence of bytes.
3) This produces the "raw bytes" that we can directly inject into the target and call CreateRemoteThread() on.
4) This process is automated through the Python script named make-raw-bytes.py. The output is raw-bytes.bin.
π¦Injection into target.
To convert the "raw bytes" into an .exe that actually injects the "raw bytes" into a target, we need to call WriteProcessMemory() & CreateRemoteThread().
1) This process is handled by make-injector-cpp.py. The output is injector.cpp, a piece of code which, when compiled, takes a target PID and executes the exploit.
2) Convenience wrapper.
As a convenience, make.bat will produce injector.exe directly by performing the steps described above.
> In other words, make.bat will:
make-raw-bytes.py
make-injector-cpp.py
build injector.exe
π¦download :
> https://github.com/vlad902/hacking-team-windows-kernel-lpe
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦WEBSITES TO DOWNLOAD ANYTHING CRACKED :
https://profreecrack.com.
https://www.ask4pc.net.
https://crackingpatching.com.
https://getintopc.com.
https://crackhomes.com.
https://www.piratecity.net.
https://www.onhaxcrack.me.
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦WEBSITES TO DOWNLOAD ANYTHING CRACKED :
https://profreecrack.com.
https://www.ask4pc.net.
https://crackingpatching.com.
https://getintopc.com.
https://crackhomes.com.
https://www.piratecity.net.
https://www.onhaxcrack.me.
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦ torrents websites 2020-most popular :
#1 YTS.am
#2 ThePirateBay.org
#3 1337x.to
#4 Rutracker.org
#5 Rarbg.to
#6 Nyaa.si
#7 Torrentz2.eu
#8 eztv.io
#9 torrent9.uno (torrent9.nz)
#10 limetorrents.info
#11 Zooqle.com
#12 katcr.co
#13 Torrentdownloads.me
#14 Magnetdl.com
#15 torlock.com
#16 pcgamestorrents.com
#17 arenabg.com
#18 torrentgalaxy.org
#19 ettv.tv (ettv.to)
#20 torrentfunk.com
#21 seedpeer.me
#22 btdig.com
#23 yourbittorrent.com
#24 monova.org
#25 idope.se
β β β ο½ππ»βΊπ«Δπ¬πβ β β β\
π¦ torrents websites 2020-most popular :
#1 YTS.am
#2 ThePirateBay.org
#3 1337x.to
#4 Rutracker.org
#5 Rarbg.to
#6 Nyaa.si
#7 Torrentz2.eu
#8 eztv.io
#9 torrent9.uno (torrent9.nz)
#10 limetorrents.info
#11 Zooqle.com
#12 katcr.co
#13 Torrentdownloads.me
#14 Magnetdl.com
#15 torlock.com
#16 pcgamestorrents.com
#17 arenabg.com
#18 torrentgalaxy.org
#19 ettv.tv (ettv.to)
#20 torrentfunk.com
#21 seedpeer.me
#22 btdig.com
#23 yourbittorrent.com
#24 monova.org
#25 idope.se
β β β ο½ππ»βΊπ«Δπ¬πβ β β β\
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Marketplace Commercial Services .onion deep web- for tor browser :
2020 - 7/24 and 24/24
http://6w6vcynl6dumn67c.onion/ β Tor Market Board β Anonymous Marketplace Forums
http://wvk32thojln4gpp4.onion/ β Project Evil
http://5mvm7cg6bgklfjtp.onion/ β Discounted electronics goods
http://lw4ipk5choakk5ze.onion/raw/evbLewgkDSVkifzv8zAo/ β Unfriendlysolution β Legit hitman service
http://nr6juudpp4as4gjg.onion/torgirls.html β Tor Girls
http://tuu66yxvrnn3of7l.onion/ β UK Guns and Ammo
http://nr6juudpp4as4gjg.onion/torguns.htm β Used Tor Guns
http://ucx7bkbi2dtia36r.onion/ β Amazon Business
http://nr6juudpp4as4gjg.onion/tor.html β Tor Technology
http://hbetshipq5yhhrsd.onion/ β Hidden BetCoin
http://cstoreav7i44h2lr.onion/ β CStore Carded Store
http://tfwdi3izigxllure.onion/ β Apples 4 Bitcoin
http://e2qizoerj4d6ldif.onion/ β Carded Store
http://jvrnuue4bvbftiby.onion/ β Data-Bay
http://bgkitnugq5ef2cpi.onion/ β Hackintosh
http://vlp4uw5ui22ljlg7.onion/ β EuroArms
http://b4vqxw2j36wf2bqa.onion/ β Advantage Products
http://ybp4oezfhk24hxmb.onion/ β Hitman Network
http://mts7hqqqeogujc5e.onion/ β Marianic Technology Services
http://mobil7rab6nuf7vx.onion/ β Mobile Store
http://54flq67kqr5wvjqf.onion/ β MSR Shop
http://yth5q7zdmqlycbcz.onion/ β Old Man Fixerβs Fixing Services
http://matrixtxri745dfw.onion/neo/uploads/MATRIXtxri745dfwONION_130827231336IPA_pc.png β PC Shop
http://storegsq3o5mfxiz.onion/ β Samsung StorE
http://sheep5u64fi457aw.onion/ β Sheep Marketplace
http://nr6juudpp4as4gjg.onion/betcoin.htm β Tor BetCoin
http://qizriixqwmeq4p5b.onion/ β Tor Web Developer
http://vfqnd6mieccqyiit.onion/ β UK Passports
http://en35tuzqmn4lofbk.onion/ β US Fake ID Store
http://xfnwyig7olypdq5r.onion/ β USA Citizenship
http://uybu3melulmoljnd.onion/ β iLike Help Guy
http://dbmv53j45pcv534x.onion/ β Network Consulting and Software Development
http://lw4ipk5choakk5ze.onion/raw/4585/ β Quick Solution (Hitman)
http://nr6juudpp4as4gjg.onion/tynermsr.htm β Tyner MSR Store
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Marketplace Commercial Services .onion deep web- for tor browser :
2020 - 7/24 and 24/24
http://6w6vcynl6dumn67c.onion/ β Tor Market Board β Anonymous Marketplace Forums
http://wvk32thojln4gpp4.onion/ β Project Evil
http://5mvm7cg6bgklfjtp.onion/ β Discounted electronics goods
http://lw4ipk5choakk5ze.onion/raw/evbLewgkDSVkifzv8zAo/ β Unfriendlysolution β Legit hitman service
http://nr6juudpp4as4gjg.onion/torgirls.html β Tor Girls
http://tuu66yxvrnn3of7l.onion/ β UK Guns and Ammo
http://nr6juudpp4as4gjg.onion/torguns.htm β Used Tor Guns
http://ucx7bkbi2dtia36r.onion/ β Amazon Business
http://nr6juudpp4as4gjg.onion/tor.html β Tor Technology
http://hbetshipq5yhhrsd.onion/ β Hidden BetCoin
http://cstoreav7i44h2lr.onion/ β CStore Carded Store
http://tfwdi3izigxllure.onion/ β Apples 4 Bitcoin
http://e2qizoerj4d6ldif.onion/ β Carded Store
http://jvrnuue4bvbftiby.onion/ β Data-Bay
http://bgkitnugq5ef2cpi.onion/ β Hackintosh
http://vlp4uw5ui22ljlg7.onion/ β EuroArms
http://b4vqxw2j36wf2bqa.onion/ β Advantage Products
http://ybp4oezfhk24hxmb.onion/ β Hitman Network
http://mts7hqqqeogujc5e.onion/ β Marianic Technology Services
http://mobil7rab6nuf7vx.onion/ β Mobile Store
http://54flq67kqr5wvjqf.onion/ β MSR Shop
http://yth5q7zdmqlycbcz.onion/ β Old Man Fixerβs Fixing Services
http://matrixtxri745dfw.onion/neo/uploads/MATRIXtxri745dfwONION_130827231336IPA_pc.png β PC Shop
http://storegsq3o5mfxiz.onion/ β Samsung StorE
http://sheep5u64fi457aw.onion/ β Sheep Marketplace
http://nr6juudpp4as4gjg.onion/betcoin.htm β Tor BetCoin
http://qizriixqwmeq4p5b.onion/ β Tor Web Developer
http://vfqnd6mieccqyiit.onion/ β UK Passports
http://en35tuzqmn4lofbk.onion/ β US Fake ID Store
http://xfnwyig7olypdq5r.onion/ β USA Citizenship
http://uybu3melulmoljnd.onion/ β iLike Help Guy
http://dbmv53j45pcv534x.onion/ β Network Consulting and Software Development
http://lw4ipk5choakk5ze.onion/raw/4585/ β Quick Solution (Hitman)
http://nr6juudpp4as4gjg.onion/tynermsr.htm β Tyner MSR Store
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
Forwarded from PRIVATE UNDERCODE
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Bugs
What makes bWAPP, our extremely buggy web application, so unique?
> SQL, HTML, iFrame, SSI, OS Command, PHP, XML, XPath, LDAP, Host Header and SMTP injections
> Cross-Site Scripting (XSS), Cross-Site Tracing (XST) and Cross-Site
>Request Forgery (CSRF)
> AJAX and Web Services issues (jQuery/JSON/XML/SOAP/WSDL)
> Authentication, authorization and session issues, file upload flaws and backdoor files
>Arbitrary file access, directory traversals, local and remote file inclusions (LFI/RFI)
> Configuration issues: Man-in-the-Middle, cross-domain policy files, information disclosures,...
> HTTP parameter pollution, HTTP response splitting and HTTP verb tampering
> Insecure DistCC, FTP, NTP, Samba, SNMP, VNC and WebDAV configurations
> HTML5 ClickJacking, Cross-Origin Resource Sharing (CORS) and web storage issues
> XML External Entity attacks (XXE) and Server Side Request Forgery (SSRF)
> Heartbleed and Shellshock vulnerability (OpenSSL), Denial-of-Service (DoS) attacks
> Parameter tampering, cookie and password reset poisoning
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦Bugs
What makes bWAPP, our extremely buggy web application, so unique?
> SQL, HTML, iFrame, SSI, OS Command, PHP, XML, XPath, LDAP, Host Header and SMTP injections
> Cross-Site Scripting (XSS), Cross-Site Tracing (XST) and Cross-Site
>Request Forgery (CSRF)
> AJAX and Web Services issues (jQuery/JSON/XML/SOAP/WSDL)
> Authentication, authorization and session issues, file upload flaws and backdoor files
>Arbitrary file access, directory traversals, local and remote file inclusions (LFI/RFI)
> Configuration issues: Man-in-the-Middle, cross-domain policy files, information disclosures,...
> HTTP parameter pollution, HTTP response splitting and HTTP verb tampering
> Insecure DistCC, FTP, NTP, Samba, SNMP, VNC and WebDAV configurations
> HTML5 ClickJacking, Cross-Origin Resource Sharing (CORS) and web storage issues
> XML External Entity attacks (XXE) and Server Side Request Forgery (SSRF)
> Heartbleed and Shellshock vulnerability (OpenSSL), Denial-of-Service (DoS) attacks
> Parameter tampering, cookie and password reset poisoning
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
Forwarded from PRIVATE UNDERCODE
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦IndexedDB vs LocalStorage :
1) Both IndexedDB and LocalStorage are used to store data in the browser, but they use different technologies and have different uses.
2) You need to choose which one to use according to your situation. LocalStorage stores data in key-value mode, but unlike IndexedDB, its data is not stored in object form. The data it stores is in the form of strings. If you want LocalStorage to store objects, you need to use the JSON.stringify()ability to turn the object into a string form, and then use JSON.parse()the string to restore the object. But if you want to store a lot of complex data, this is not a good solution. After all, localstorage is specifically designed for small amounts of data, and its APIs are synchronized.
3) IndexedDB is very suitable for storing large amounts of data, and its API is called asynchronously. IndexedDB uses indexes to store data, and various database operations are performed in transactions. IndexedDB even supports simple data types. IndexedDB is much more powerful than local storage, but its API is also relatively complex.
4) For simple data, you should continue to use local storage, but when you want to store a large amount of data, IndexedDB will obviously be more suitable. IndexedDB can provide you with a more complicated way to query data.
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β
π¦IndexedDB vs LocalStorage :
1) Both IndexedDB and LocalStorage are used to store data in the browser, but they use different technologies and have different uses.
2) You need to choose which one to use according to your situation. LocalStorage stores data in key-value mode, but unlike IndexedDB, its data is not stored in object form. The data it stores is in the form of strings. If you want LocalStorage to store objects, you need to use the JSON.stringify()ability to turn the object into a string form, and then use JSON.parse()the string to restore the object. But if you want to store a lot of complex data, this is not a good solution. After all, localstorage is specifically designed for small amounts of data, and its APIs are synchronized.
3) IndexedDB is very suitable for storing large amounts of data, and its API is called asynchronously. IndexedDB uses indexes to store data, and various database operations are performed in transactions. IndexedDB even supports simple data types. IndexedDB is much more powerful than local storage, but its API is also relatively complex.
4) For simple data, you should continue to use local storage, but when you want to store a large amount of data, IndexedDB will obviously be more suitable. IndexedDB can provide you with a more complicated way to query data.
@UndercodeTesting
β β β ο½ππ»βΊπ«Δπ¬πβ β β β