🔵Newsletter wordpress CVE-2020-35933, XSS:

https://dailycve.com/newsletter-wordpress-cve-2020-35933-xss

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

All about SS7 HACKING + GUIDE :

SigPloit a signaling security testing framework dedicated to Telecom Security professionals and reasearchers to pentest and exploit vulnerabilites in the signaling protocols used in mobile operators regardless of the geneartion being in use. SigPloit aims to cover all used protocols used in the operators interconnects SS7, GTP (3G), Diameter (4G) or even SIP for IMS and VoLTE infrastructures used in the access layer and SS7 message encapsulation into SIP-T. Recommendations for each vulnerability will be provided to guide the tester and the operator the steps that should be done to enhance their security posture

🄸🄽🅂🅃🄰🄻🄻🄸🅂🄰🅃🄸🄾🄽 & 🅁🅄🄽 :

Version 1: SS7
SigPloit will initially start with SS7 vulnerabilities providing the messages used to test the below attacking scenarios

A- Location Tracking

B- Call and SMS Interception

C- Fraud
Version 2: GTP
This Version will focus on the data roaming attacks that occur on the IPX/GRX interconnects.

Version 3: Diameter
This Version will focus on the attacks occurring on the LTE roaming interconnects using Diameter as the signaling protocol.

Version 4: SIP
This is Version will be concerned with SIP as the signaling protocol used in the access layer for voice over LTE(VoLTE) and IMS infrastructure. Also, SIP will be used to encapsulate SS7 messages (ISUP) to be relayed over VoIP providers to SS7 networks taking advantage of SIP-T protocol, a protocol extension for SIP to provide intercompatability between VoIP and SS7 networks

Version 5: Reporting
This last Version will introduce the reporting feature. A comprehensive report with the tests done along with the recommendations provided for each vulnerability that has been exploited.

BETA Version of SigPloit will have the Location Tracking attacks of the SS7 phase 1
Installation and requirements

»The requirements for this project are:

1) Python 2.7
2) Java version 1.7 +
3) sudo apt-get install lksctp-tools
4) Linux machine
https://github.com/SigPloiter/SigPloit
5) To run use

cd SigPloit

6) sudo pip2 install -r requirements.txt

7) python sigploit.py

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🔵Lms app crash bug error :

https://dailycve.com/lms-app-crash-bug-error

News from google play: Starting January 18, 2021.
#Updates

Google and its parent company have announced the formation of hundreds of staff unions.
#International

Linux Stuff by Lagerspetz:

https://github.com/lagerspetz/linux-stuff

🔵libproxy in ubuntu CVE-2020-26154 :

https://dailycve.com/libproxy-ubuntu-cve-2020-26154

In early 2021, Apple is scheduled to announce the first iPad Pro with a mini LED display.
#Technologies

The fixed and mobile network inefficiencies have been formalized by Tiscali after attack.
#CyberAttacks

Looking for more ecryption, a management tool for dnscrypt-proxy :

-Free

-Open source

https://simplednscrypt.org/

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🔵SUSE CVE-2020-27781 :

https://dailycve.com/suse-cve-2020-27781

This year, Apple will change the cash incentives for managers based on environmental principles.
#International

The Russian hackers sells in darknet a program that allows you to distribute spam messages bypassing traffic and email protection.
#Malwares

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Pyongyang 2407 - Android ROM from North Korea, modified to run on WBW5511_MAINBOARD_P2 devices. Releases contains an archived ROM with all needed tools to boot DPRK Android on compatible hardware. …

🄸🄽🅂🅃🄰🄻🄻🄸🅂🄰🅃🄸🄾🄽 & 🅁🅄🄽 :

Check you can see the preloader of your device, this shows up very briefly on powering device without battery. It contains a simple download & boot from RAM backdoor that lets you run any .bin code to read/write/format the EMMC / NAND and SDMMC (which MT6582 boots from). It is provided by the "preloader" function.

1) [136466.320357] usb 1-5: new high-speed USB device number 48 using xhci_hcd

2) [136466.462845] usb 1-5: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[136466.462853] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

3) [136466.462858] usb 1-5: Product: MT65xx Preloader

4) [136466.462862] usb 1-5: Manufacturer: MediaTek

5) [136466.526864] cdc_acm 1-5:1.1: ttyACM0: USB ACM device

6) [136468.181907] usb 1-5: USB disconnect, device number 48

7) If you can see something similar to above in dmesg output and no ModemManager is running you can proceed.

load included jellybean (WBW5511GI_0202_T5752) based rom onto device, using SPFlashTool

8) Boot device, it will take a few minutes
root device - kingroot APK (works)

9) put data.ext4 and system.tar onto /sdcard via "adb push"
upload "gnutar" and "busybox-android" from this repo
"adb shell" and check "su" works

10) Install ROM 평양 files
I made some modifications to the KCC files to work with the supplied ROM. For instance I have replaced missing kernel modules in "/usr/lib/modules" and created a compatible layout file with a new kernel image and clean boot loaders. you still need to manually overwrite "/system" and "/data" from a root shell. You must first remount both into rw mode from "adb shell" as root.

11) "mount -o rw,remount /system" "mount -o rw,remount /data"

You then want to "rm -rf /system/" and "/data/" but you cannot run "busybox-android" from "/sdcard" so you must ensure that it survives your "rm -rf" brutality. You are going to wipe important system files and replace them with the contents of the two tar files.

12) cp "busybox-android" and "gnutar" into a executable safe place such as /data.

13) wipe /system after remount rw with "rm -rf /system", run twice, some files will stick.

14) use supplied "gnutar" and PRESERVE PERMISSIONS with "gnutar -xvpf" and unpack system.tar /system
once you have /system unpacked, put busybox-android and gnutar in /system/xbin

15) now do the same "rm -rf /data/*" and "gnutar -xvpf" to /data with data.ext4

16) reboot
▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Why are features such as HDMI performance from FreeSync not built into the open source driver?
#Technologies

The president Trump: Banned transactions with 8 Chinese apps including Alipay, QQ, and WPS .
#Ban

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Dynamic analysis of Android applications :

Deploying release candidate
This is a guide to get DroidBox running. The release has only been tested on Linux and Mac OS. If you do not have the Android SDK, download it from http://developer.android.com/sdk/index.html. The following libraries are required: http://www.scipy.org/PyLab'>pylab and http://matplotlib.sourceforge.net/'>matplotlib to provide visualization of the analysis result.

1) Export the path for the SDK tools
export PATH=$PATH:/path/to/android-sdk/tools/ export PATH=$PATH:/path/to/android-sdk/platform-tools/

2) Download necessary files and uncompress it anywhere wget http://droidbox.googlecode.com/files/DroidBox411RC.tar.gz

3) Setup a new AVD targeting Android 4.1.2 and choose Nexus 4 as device as well as ARM as CPU type by running: android

4) Start the emulator with the new AVD: ./startemu.sh <AVD name>

5) When emulator has booted up, start analyzing samples (please use the absolute path to the apk): ./droidbox.sh <file.apk> <duration in secs (optional)>

6) The analysis is currently not automated except for installing and starting packages. Ending the analysis is simply done by pressing Ctrl-C. A package will also be implemented soon to populate the emulator with data prior to performing analysis.

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🔵Cross Site Request Forgery vulnerability in McAfee :

https://dailycve.com/cross-site-request-forgery-vulnerability-mcafee

CES 2021 is going to open online soon. Intel will take the opportunity to warm up the desktop Core.
#Technologies

Microsoft starts mass extermination of famous applications and resources for Windows 10.
#Updates