Fortnite: here’s the main 5th season news
#Updates

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑what to choose between a mobile phone and a rugged smartphone?

These types of phones can withstand the harshest and most remote conditions and can be used in extreme weather conditions (such as mountain ranges or deserts), high humidity, rain and even submersion in water.

Given the wide range of models on the market, how do you choose the best option?

Each rugged phone has been assigned an Ingress Protection (IP) rating.

The Ingress Protection rating indicates how resistant a particular phone is to water and dust.

It consists of two numbers (for example, IP68):

1) The first number indicates the degree of resistance of the phone to solids, usually dust or sand. This number can be between 0 and 6: 0 means the phone is not dustproof, and 6 means it is completely dustproof, even if it is fine dust.

2) The second number indicates the phone's resistance to liquids. This number can range from 0 to 8. The higher the number, the higher the moisture resistance level. For example, 3 means the smartphone is protected from rain, 5 means it is protected from low-pressure water jets from any direction, and 8 means that the phone can withstand prolonged immersion in water more than one meter deep for one hour (water depth which the phone can withstand when immersed is specified by each manufacturer). Recently, the 9K has entered the market, which refers to itself as a high pressure protection level.
If you are looking for a phone that can withstand dust and immersion in water (for example, if you work near a plumbing), an IP68 phone is perfect for you.

» It is also the most common smartphone model.

» In terms of bumps and drops, shockproof phones are also rated by military standards.

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Quibi is already dead, the video streaming service has been withdrawn.
#Updates

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

RECOMMENDED WEB HACKING COURSES:

https://www.youtube.com/watch?v=2_lswM1S264
2H

https://www.youtube.com/watch?v=24fHLWXGS-M
5H

https://www.youtube.com/watch?v=dz7Ntp7KQGA
10H

https://www.youtube.com/watch?v=biM47F99i9A

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Enjoy Support & Share ❤️👍🏻

T.me/UndercodeTesting

WhatsApp: new terms of use, consumers coerced into agreeing
#Updates

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Method of Enabling Bash in Windows 10

Step 1: Ensuring that the Developer Mode is enabled
Firstly, you have to verify that the Windows 10 developer mode is on. For that, you have to visit the Windows 10 Settings window. This can be done by typing Settings in the Cortana search bar and clicking on the Settings result



Doing this will take you straight to the Settings window of Windows 10. In the Settings window, you will find several different tabs from which you are supposed to locate and click on the “Update and Security” tab.


You need to click on the “For developers” tab located at the left pane of the window present In the Update and Security settings window.



Clicking on this tab will display the Developers settings of Windows 10. From here, you need to verify if the Developer mode is enabled or not. If it is not enabled by default, then you can simply click on the Developer mode radio button. In our case, the Developer mode was enabled by default


Step 2: Accessing the Windows 10 Control Panel
After ensuring that the Developer mode is on, the next step is to navigate to the Windows 10 Control Panel. You have to use the Cortana search bar for this purpose. Just type in Control Panel in the Cortana search bar and then click on the Control Panel result


Step 3: Enabling the Windows Subsystem for Linux by using the Windows 10 Control Panel
Once you have gained access to the Windows 10 Control Panel, you need to click on the “Programs and Features” tab located in the second column of the window.


Clicking on this tab will lead you to the Programs and Features window of the Windows 10 Control Panel. From here, you need to click on the “Turn Windows features on or off” link



As soon as you click on the link, the “Windows Features” mini window will be displayed on your screen. It will take a few seconds for it to load all the Windows 10 features, i.e., both the enabled ones and the disabled ones. From these features, you have to locate the “Windows Subsystem for Linux” feature as highlighted in the following image:



After locating this feature, you need to click on the checkbox located before this feature to enable it and then click on the OK button

WELL DONE

from unixforo
▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

KAIST, 30,000 sensitive data leaked by faculty and students due to hacking
#Leaks

new php backdoor script

https://pastebin.com/Vb2VtvXT

Apple: Foldable iPhone Hinge Mechanism Patent Shows.
#Updates

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Slocker The leaked ransomware :

🄸🄽🅂🅃🄰🄻🄻🄸🅂🄰🅃🄸🄾🄽 & 🅁🅄🄽 :

1) https://github.com/julienstroheker/Slocker

2) FROM julienstroheker/slocker

3) ENV Slack_Hook_Url 'https://hooks.slack.com/services/XXXXX/XXXXXX/XXXXXXXXXX'

4) COPY app/redirectChannel.json /usr/src/app/redirectChannel.json

5) EXPOSE 8080

6) CMD python2 /usr/src/app/slocker.py

7) Build your container Docker Build DockerFile

8) You'll need to modfify the redirectChannel.json with your own parameters :

"NameUserDocker/NameRepoDocker":"#YourSlackChannel"
}```

9) Execute your container Docker run -d -p 8080:8080 julienstroheker/slocker

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

New Cloudbees Jenkins authorization issue vulnerability.
#Vulnerabilities

Big discover ! Skyrmions: Could advance data storage for high-density
#Technologies

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Boost C++ Libraries windows :

Easy install on Windows 7 or later ----------------------------------

download: https://sourceforge.net/projects/boost/files/latest/download


1) Open up a Cygwin terminal and cd to your downloaded source

2) Run ./bootstrap.bat ( had to search for file) ~/Desktop/Download/boost_1_62_0/tools/build$ ./bootstrap.bat mingw ** because Im using mingw Bootstrapping the build engine Bootstrapping is done.

3) To build, run: .\b2 --prefix=DIR install 3. Since I use Mingwing gcc I run the following commands: ~/Desktop/Download/boost_1_62_0/tools/build$ ./b2.exe --prefix=/boost/ toolset=gcc install Easy Install. Examples are in the install directory cd examples and just find a main.cpp program. To compile just run the following command : g++ main.cpp -o example1


▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Google Fit: The most current version deletes those functionality.
#Updates #Technologies

Apple Fitness Plus: the rollout of the new service will soon take place.
#Updates