Then edit the /etc/sysctl.conf and /etc/rc.local files , remove the lines after the # Added by hwdsl2 VPN script comment in both files.

Do not remove exit 0 if the entry exists.

Optionally, you can delete specific files and directories that were created during VPN setup.

# rm -f /etc/ipsec.conf* /etc/ipsec.secrets* / etc / ppp / chap-secrets * /etc/ppp/options.xl2tpd* /etc/pam.d/pluto / etc / sysconfig / pluto / etc / default / pluto
# rm -rf /etc/ipsec.d / etc / xl2tpd
@UndercodeTesting
▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Support & Share:

T.me/UndercodeTesting

Improper access control in Nextcloud Social app allowed to read posts of any user.
#Vulnerabilities

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑AWS Pen Testing References

- PENETRATION TESTING AWS STORAGE: KICKING THE S3 BUCKET - Written by Dwight Hohnstein from Rhino Security Labs.

- AWS PENETRATION TESTING PART 1. S3 BUCKETS - Written by @VirtueSecurity.

- AWS PENETRATION TESTING PART 2. S3, IAM, EC2 - Written by @VirtueSecurity.

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Yandex's head advised him when he would begin issuing bank cards and loans.
#international

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑Track Location With Live Address And Accuracy In Termux:

[+] Real live location !
[+] Updated maintainence !
[+] Ip lookup
[+] Easy for Beginners !

🄸🄽🅂🅃🄰🄻🄻🄸🅂🄰🅃🄸🄾🄽 & 🅁🅄🄽 :

1) apt-get update -y

2) apt-get upgrade -y

3) pkg install python -y

4) pkg install python2 -y

5) pkg install git -y

6) pip install lolcat

7) pip install requests

8) git clone https://github.com/noob-hackers/ipdrone

9) cd $HOME

10) ls

11) cd ipdrone

12) ls

13) python ipdrone.py -v (your victim ip here)
ex:- python ipdrone.py -v 127.0,0.1

Hurray... you got his location with some more information

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

The mass production of the smartphone on Debian Linux "for the paranoid" began
#Technologies #Updates

Many dangerous vulnerabilities found in famous industrial system products.
#Analytiques #Vulnerabilities

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🔩 HardInfo - checking hardware information on Linux:

Installing HardInfo

1) HardInfo is the most popular graphical application, tested on Ubuntu / Mint, Debian, OpenSUSE, Fedora / CentOS / RHEL, Arch Linux and Manjaro Linux.

2) HardInfo is available for installation on all major Linux distributions from the default repository.

Installing HardInfo on Debian, Ubuntu and Linux Mint
$ sudo apt install hardinfo
Installing HardInfo on Fedora / CentOS Linux

3) For some reason, the Fedora team decided to stop packaging Hardinfo in the repository, so you will need to build it from source as follows:

# dnf install glib-devel gtk + -devel zlib-devel libsoup-devel

$ cd Downloads

$ git clone https://github.com/lpereira/hardinfo.git

$ cd hardinfo

$ mkdir build

$ cd build

$ cmake ..

$ make

4) # make install
Installing HardInfo on Arch and Manjaro Linux
$ sudo pacman -S hardinfo
Installing HardInfo on OpenSUSE
$ sudo zypper in hardinfo

5) How to use HardInfo on Linux
After installation, open Hardinfo on your computer.

It is a graphical application and should be categorized as System named System Profiler and Benchmark in your distribution's launcher.

6) When it opens, you will see the various tabs on the left sidebar, sorted by category, and the information contained in those tabs listed on the right.

For example, you can view information about your system processor.

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

Vulnerable to ransomware and IT infrastructure becoming complex with multi-cloud.
#Malwares

All Linux users should update their kernel now.
#Vulnerabilities

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑CI workflow design:

1) The Git code version management system can only manage git from the command line

Gitlab is based on git as a graphical management page, and companies use gitlab as a private code management warehouse

2) Github public code management repository

Build gitlab

3) Set up gitlab to create a working directory first, because some data needs to be persisted

[root@www ~]# mkdir -p /gitlab
[root@www ~]# cd /gitlab/

docker run -d \
--name gitlab \
-p 8443:443 \
-p 9999:80 \
-p 9998:22 \
-v /gitlab/config:/etc/gitlab \
-v /gitlab/logs:/var/log/gitlab \
-v /gitlab/data:/var/opt/gitlab \
-v /etc/localtime:/etc/localtime \
--restart=always \
lizhenliang/gitlab-ce-zh:latest
9999 is web port 8443 web htpps port 9998 ssh port

4) Persist the containerized data to the local host. This image is built after the early Chineseization. The default official image is in English. This is in English. This image is about 1G in size, including database and message queue, which are encapsulated. There is a lot of content.


[root@www gitlab]# docker logs 3396d5ccc518
- execute /opt/gitlab/bin/gitlab-ctl start postgresql
+psql_host='/var/opt/gitlab/postgresql'
Through the log can see which components such as postgresql

5) It may be a bit slow on the first visit, because there are many components, you may have to wait 3-5 minutes

6) now page shows that the gitlab service is started, and other components may not be started successfully. It’s best to give 4G of physical memory here, if only 2G is not able to start normally, it will be as follows after about eight minutes


The default user name is root. Here you need to set a new password. The new password can be set to qwerasdf with at least 8 characters, and then after updating the password, you can use the root user name and password qwerasdf to log in

Create a private project java-demo

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

In a multi-million dollar fight over Cisco in Russia, Tiny IT business beats Rosenergoatom.
#international

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

📜 How to parse INI config files with Bash:
for pro hackers...

Sample INI file
I will use the following INI config file in the following examples.

[main]
description = Sample configuration
timeout = 10
monitoring_interval = 20

[database]
server = db.example.org
port = 3306
username = dbuser
password = dbpass

[monitor]
servers[] = www.example.org
servers[] = proxy.example.org
servers[] = cache.example.org
servers[] = bastion.example.org
Parse entire INI file
Let's read and analyze the entire INI file.

#!/bin/bash
# Read and parse simple INI file

# Get INI section
ReadINISections(){
local filename="$1"
awk '{ if ($1 ~ /^\[/) section=tolower(gensub(/\[(.+)\]/,"\\1",1,$1)); configuration[section]=1 } END {for (key in configuration) { print key} }' ${filename}
}

# Get/Set all INI sections
GetINISections () {
local filename="$1"

sections="$(ReadINISections $filename)"
for section in $sections; do
array_name="configuration_${section}"
declare -g -A ${array_name}
done
eval $(awk -F= '{
if ($1 ~ /^\[/)
section=tolower(gensub(/\[(.+)\]/,"\\1",1,$1))
else if ($1 !~ /^$/ && $1 !~ /^;/) {
gsub(/^[ \t]+|[ \t]+$/, "", $1);
gsub(/[\[\]]/, "", $1);
gsub(/^[ \t]+|[ \t]+$/, "", $2);
if (configuration[section][$1] == "")
configuration[section][$1]=$2
else
configuration[section][$1]=configuration[section][$1]" "$2}
}
END {
for (section in configuration)
for (key in configuration[section])
print "configuration_"section"[\""key"\"]=\""configuration[section][key]"\";"
}' ${filename}
)


}

if [ "$#" -eq "1" ] && [ -f "$1" ]; then
filename="$1"
GetINISections "$filename"

echo -n "Configuration description: "
if [ -n "${configuration_main["description"]}" ]; then
echo "${configuration_main["description"]}"
else
echo "missing"
be
echo

for section in $(ReadINISections "configuration.ini"); do
echo "[${section}]"
for key in $(eval echo $\{'!'configuration_${section}[@]\}); do
echo -e " ${key} = $(eval echo $\{configuration_${section}[$key]\}) (access it using $(echo $\{configuration_${section}[$key]\}))"
done
done
else
echo "missing INI file"
be

▁ ▂ ▄ U𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁