In 2019 Malik Riaz Hussain and Ali Riaz Malik were subject to the largest asset recovery settlement ever recorded by the National Crime Agency, agreeing to forfeit £140million in cash plus a Knightsbridge home worth £50million.
However, after being passed to the Pakistani government, the money was allegedly then illicitly used by the country’s then PM, former cricketer Imran Khan, to pay off Mr Hussain’s debts.
https://www.dailymail.co.uk/news/article-15707881/MPs-promoted-luxury-Dubai-desert-city-despite-tycoons-project-banned-UK.html
However, after being passed to the Pakistani government, the money was allegedly then illicitly used by the country’s then PM, former cricketer Imran Khan, to pay off Mr Hussain’s debts.
https://www.dailymail.co.uk/news/article-15707881/MPs-promoted-luxury-Dubai-desert-city-despite-tycoons-project-banned-UK.html
Mail Online
MPs 'promoted' Dubai desert city despite UK ban on 'corrupt' tycoons
Labour MPs Afzal Khan and Naz Shah, plus independent Ayoub Khan, all attended events aimed at encouraging British-Pakistani investors to buy homes in a new desert city.
Last week, the rules were tightened so that fighting age men must ask the army for permission to leave the country for more than three months.
The legislation also includes a clause whereby those between the ages of 17 and 45 will require a permit from the Bundeswehr, the country's military, to be able to depart from Germany for longer periods.
Germany's leader Friedrich Merz's hopes his country will become a major security power within Europe with the help of what he hopes will eventually be 'the strongest conventional army' in the continent.
https://www.dailymail.co.uk/news/article-15708349/Labour-accused-dithering-war-footing-bill-defence-delayed.html
The legislation also includes a clause whereby those between the ages of 17 and 45 will require a permit from the Bundeswehr, the country's military, to be able to depart from Germany for longer periods.
Germany's leader Friedrich Merz's hopes his country will become a major security power within Europe with the help of what he hopes will eventually be 'the strongest conventional army' in the continent.
https://www.dailymail.co.uk/news/article-15708349/Labour-accused-dithering-war-footing-bill-defence-delayed.html
Forwarded from Hacker News
Employers use your personal data to figure out the lowest salary you'll accept (Score: 150+ in 5 hours)
Link: https://readhacker.news/s/6Rngu
Comments: https://readhacker.news/c/6Rngu
Link: https://readhacker.news/s/6Rngu
Comments: https://readhacker.news/c/6Rngu
MarketWatch
Employers are using your personal data to figure out the lowest salary you’ll accept
Surveillance pricing came for your wallet. Now, surveillance wages are coming for your paycheck.
🤬1
FLASH: Iran DESTROYS Israel Defense HQ With Cluster Warheads — 10 Targets Hit in 24 Hours
https://www.theinteldrop.org/2026/04/05/flash-iran-destroys-israel-defense-hq-with-cluster-warheads-10-targets-hit-in-24-hours/
https://www.theinteldrop.org/2026/04/05/flash-iran-destroys-israel-defense-hq-with-cluster-warheads-10-targets-hit-in-24-hours/
THE INTEL DROP
FLASH: Iran DESTROYS Israel Defense HQ With Cluster Warheads — 10 Targets Hit in 24 Hours
On April 5th, 2026, Iran launched cluster warhead ballistic missiles directly at Israel's Defense Ministry headquarters in central Tel Aviv, with two warheads detonating near the command center....
OVER 30 GENERALS ‘REFUSE TRUMP GROUND INVASION ORDER’
12 fired ‘so far & timing’ can only mean ground troop mutiny https://t.co/lleWsmVnZ9 pic.twitter.com/TwcPJuGMOD
— RT (@RT_com) April 4, 2026
12 fired ‘so far & timing’ can only mean ground troop mutiny https://t.co/lleWsmVnZ9 pic.twitter.com/TwcPJuGMOD
— RT (@RT_com) April 4, 2026
Forwarded this email? Subscribe here for more
Recording V2K with SDR
Targeted Justice, Inc.
Apr 4
READ IN APP
Software Defined Radio (SDR) is the key technology for recording V2K. Want to learn how to make a clear recording your V2K? Just demodulate the signal and it is clear as a radio.
*Thanks to Grok and TargetSourceLLC.com
/
Free Software for SDR
Here is the logic. However, we may need to modify it for their “tricks:”
Scan input between 350 - 800 MHz
Identify the loudest frequencies next to your ears. .(They will likely use frequency hopping, or try to move to higher frequencies). May need to filter it by dB or by frequencies.
Demodulate and record the V2K. (Probably AM signal (amplitude modulation)
Use SDR to generate a signal that is 180 degrees phase difference. This is the anti-signal that cancels the carrier wave. If the carrier wave is canceled - then there is no voice signal for V2K. This is the same method that is used for noise canceling headphones.
The raspberry pi can be portable and held next to your ear.
Grok can help with python programming or with SDR console custom programming.
/
HARDWARE
The lowest-cost portable SDR (Software Defined Radio) units capable of receiving and demodulating signals up to (and well beyond) 800 MHz are RTL-SDR-based dongles, starting at around $20–40. These are by far the cheapest viable options and remain the go-to entry-level choice in 2026. They require a small host device (Android phone via USB OTG, Raspberry Pi, or laptop) for full operation but are highly portable due to their tiny USB-stick form factor. 1. RTL-SDR Blog V4 (or Nooelec NESDR Smart / equivalents) – ~$20–40 (lowest cost)
Frequency coverage: ~500 kHz to 1.7+ GHz (continuous, easily handles 800 MHz UHF with no gaps in the relevant bands).
Demodulation: Full software support for AM, FM, NFM, SSB, CW, digital modes, P25, ADS-B, etc., via free apps/software (SDR#, SDR++, RF Analyzer on Android, etc.).
Portability: Ultra-compact USB dongle (with TCXO for stability). Pair it with a cheap Android phone + OTG cable (~$5–10 extra) or a Raspberry Pi Zero for a fully portable, battery-powered setup. Some kits include antennas and cables for ~$30–60 total.
Why it wins on cost: Excellent performance for the price; widely used for airband, public safety (700/800 MHz), ham radio, etc. Limitations: Needs external computing device; basic sensitivity without add-ons.
Where to buy: Amazon, AliExpress, Nooelec official (search “RTL-SDR Blog V4” or “Nooelec NESDR”). Current 2026 pricing holds steady in the $20–40 range for the dongle alone.
You will need an antenna and the connecting cables.
This is the clear lowest-cost solution that meets your requirements.
2. Malahit DSP2 (Malachite DSP2) clones / official – ~$150–460 (lowest-cost standalone handheld)
Frequency coverage: 10 kHz–380 MHz + 404 MHz–2 GHz (explicitly covers 800 MHz and higher with a small gap that doesn’t affect UHF use).
Demodulation: Built-in multi-mode (AM, SSB, DSB, CW, NFM, WFM) with noise reduction, 192/96/48 kHz waterfall/spectrum display, and decoders (FT8, RTTY, etc.). No external computer needed.
Portability: True handheld standalone unit with 3.5″ touchscreen, 5000 mAh battery, aluminum case, and onboard controls—ideal for field use.
Pricing notes: Cheaper clones on AliExpress/Alibaba/Walmart ~$150–250 (verify seller and firmware version 2.4+); premium/registered versions or Amazon listings ~$400–460. Avoid the very cheapest unbranded units if reliability matters.
Trade-off: Significantly more expensive than RTL-SDR but offers a complete pocketable radio experience with no host device required.
Other Notes on Cheaper / Alternative Options
Many ultra-budget Chinese handheld “DSP SDR” units (e.g., Karlak, generic 4.3″ touchscreen models, or basic ATS25 variants) sell for ~$50–115 but are typically limited to ~100–149 MHz max and do not reach 800 MHz reliably. These are unsuitable for your needs.
Recording V2K with SDR
Targeted Justice, Inc.
Apr 4
READ IN APP
Software Defined Radio (SDR) is the key technology for recording V2K. Want to learn how to make a clear recording your V2K? Just demodulate the signal and it is clear as a radio.
*Thanks to Grok and TargetSourceLLC.com
/
Free Software for SDR
Here is the logic. However, we may need to modify it for their “tricks:”
Scan input between 350 - 800 MHz
Identify the loudest frequencies next to your ears. .(They will likely use frequency hopping, or try to move to higher frequencies). May need to filter it by dB or by frequencies.
Demodulate and record the V2K. (Probably AM signal (amplitude modulation)
Use SDR to generate a signal that is 180 degrees phase difference. This is the anti-signal that cancels the carrier wave. If the carrier wave is canceled - then there is no voice signal for V2K. This is the same method that is used for noise canceling headphones.
The raspberry pi can be portable and held next to your ear.
Grok can help with python programming or with SDR console custom programming.
/
HARDWARE
The lowest-cost portable SDR (Software Defined Radio) units capable of receiving and demodulating signals up to (and well beyond) 800 MHz are RTL-SDR-based dongles, starting at around $20–40. These are by far the cheapest viable options and remain the go-to entry-level choice in 2026. They require a small host device (Android phone via USB OTG, Raspberry Pi, or laptop) for full operation but are highly portable due to their tiny USB-stick form factor. 1. RTL-SDR Blog V4 (or Nooelec NESDR Smart / equivalents) – ~$20–40 (lowest cost)
Frequency coverage: ~500 kHz to 1.7+ GHz (continuous, easily handles 800 MHz UHF with no gaps in the relevant bands).
Demodulation: Full software support for AM, FM, NFM, SSB, CW, digital modes, P25, ADS-B, etc., via free apps/software (SDR#, SDR++, RF Analyzer on Android, etc.).
Portability: Ultra-compact USB dongle (with TCXO for stability). Pair it with a cheap Android phone + OTG cable (~$5–10 extra) or a Raspberry Pi Zero for a fully portable, battery-powered setup. Some kits include antennas and cables for ~$30–60 total.
Why it wins on cost: Excellent performance for the price; widely used for airband, public safety (700/800 MHz), ham radio, etc. Limitations: Needs external computing device; basic sensitivity without add-ons.
Where to buy: Amazon, AliExpress, Nooelec official (search “RTL-SDR Blog V4” or “Nooelec NESDR”). Current 2026 pricing holds steady in the $20–40 range for the dongle alone.
You will need an antenna and the connecting cables.
This is the clear lowest-cost solution that meets your requirements.
2. Malahit DSP2 (Malachite DSP2) clones / official – ~$150–460 (lowest-cost standalone handheld)
Frequency coverage: 10 kHz–380 MHz + 404 MHz–2 GHz (explicitly covers 800 MHz and higher with a small gap that doesn’t affect UHF use).
Demodulation: Built-in multi-mode (AM, SSB, DSB, CW, NFM, WFM) with noise reduction, 192/96/48 kHz waterfall/spectrum display, and decoders (FT8, RTTY, etc.). No external computer needed.
Portability: True handheld standalone unit with 3.5″ touchscreen, 5000 mAh battery, aluminum case, and onboard controls—ideal for field use.
Pricing notes: Cheaper clones on AliExpress/Alibaba/Walmart ~$150–250 (verify seller and firmware version 2.4+); premium/registered versions or Amazon listings ~$400–460. Avoid the very cheapest unbranded units if reliability matters.
Trade-off: Significantly more expensive than RTL-SDR but offers a complete pocketable radio experience with no host device required.
Other Notes on Cheaper / Alternative Options
Many ultra-budget Chinese handheld “DSP SDR” units (e.g., Karlak, generic 4.3″ touchscreen models, or basic ATS25 variants) sell for ~$50–115 but are typically limited to ~100–149 MHz max and do not reach 800 MHz reliably. These are unsuitable for your needs.
TinySA Ultra (~$120): Excellent portable spectrum analyzer (100 kHz–6 GHz), with basic AM/FM demodulation. However, it is not a full general-purpose SDR receiver for continuous voice/digital demodulation across modes—better as a companion tool than primary RX.
Higher-end portable options (HackRF One + PortaPack ~$250+, AirSpy, etc.) exceed the “lowest cost” category while offering similar or better performance.
Recommendation: Start with an RTL-SDR V4 (~$30) + Android phone setup if you want the absolute lowest cost and don’t mind a small host device. Upgrade to a Malahit DSP2 only if you need a fully self-contained handheld without any extra gear. All of these easily handle 800 MHz signals (e.g., public safety, ham UHF, etc.) with appropriate antennas. Prices fluctuate on AliExpress/Amazon—check recent listings and reviews for the best current deals. Always use a good external antenna for optimal UHF performance.
/
Known Frequencies used for V2K
We have measured V2K signals at 638 - 641 MHz, & 660 - 680 MHz. Another TI has measured the V2K at 473 - 478 MHz. We need other TI’s to use a signal analyzer and determine their frequencies. Sweep thru 450 - 700 MHz, while the V2K signal is broadcasting. 423 - 439 MHz has been measured for subliminal messages and cell tower DEW attacks.
Also look for a bandwidth of about 3KHz of an envelope of pulsed RF. It will look like a comb (spikes in the frequency spectrum).
An inexpensive signal analyzer: GQ Electronics EMF-390. Hold it next to your ear during V2K and it will display what frequencies they are using.
•Thanks to TargetSourceLLC.com
See the website for other electronic devices, like the Silent Knight.
/
Higher-end portable options (HackRF One + PortaPack ~$250+, AirSpy, etc.) exceed the “lowest cost” category while offering similar or better performance.
Recommendation: Start with an RTL-SDR V4 (~$30) + Android phone setup if you want the absolute lowest cost and don’t mind a small host device. Upgrade to a Malahit DSP2 only if you need a fully self-contained handheld without any extra gear. All of these easily handle 800 MHz signals (e.g., public safety, ham UHF, etc.) with appropriate antennas. Prices fluctuate on AliExpress/Amazon—check recent listings and reviews for the best current deals. Always use a good external antenna for optimal UHF performance.
/
Known Frequencies used for V2K
We have measured V2K signals at 638 - 641 MHz, & 660 - 680 MHz. Another TI has measured the V2K at 473 - 478 MHz. We need other TI’s to use a signal analyzer and determine their frequencies. Sweep thru 450 - 700 MHz, while the V2K signal is broadcasting. 423 - 439 MHz has been measured for subliminal messages and cell tower DEW attacks.
Also look for a bandwidth of about 3KHz of an envelope of pulsed RF. It will look like a comb (spikes in the frequency spectrum).
An inexpensive signal analyzer: GQ Electronics EMF-390. Hold it next to your ear during V2K and it will display what frequencies they are using.
•Thanks to TargetSourceLLC.com
See the website for other electronic devices, like the Silent Knight.
/
🔥1
Other Methods to Record V2K & Subliminal Messages
Targeted Justice, Inc.
Apr 6
READ IN APP
Other Methods to Record V2K
You don’t have to use a fancy software program for Software Defined Radio (SDR).
Grok.com or any major AI can create a custom program for scanning frequencies and demodulating the signal. These signals were combined with the carrier wave using Amplitude Modulation (AM).
Grok can write a program (macro) for an Excel spreadsheet, or in BASIC, Python, or even HTML5 code. It can also write a stand-alone program that runs on your desktop.
Here is a sample logic that you can use to instruct Grok:
Using an SDR device, RX-888 is plugged into a USB Port. (for example)
Please use the device to scan all frequencies between 300 - 800 MHz. (might need to expand this frequency range later)
Find the loudest 20 signals, and demodulate them. Assume that Amplitude Modulation (AM) was used. (hold the receiver antenna near your ear.)
Identify voice signals on each, and save in separate files as mp3 format. Place the files on the desktop, and number them beginning with 1, and label them for the approximate frequency, ie., 1-478.2MHZ.
Identify the specific frequencies that are being used, and limit the scanning to those frequencies.
Continue this process until I hit the ESC button.
If done correctly, you will now have voice files on your desktop that includes your V2K and subliminal messaging that is being used on everyone.
Please comment below, if you have alternate methods or logic.
\
How to Use Grok: A Comprehensive Guide for Beginners and Experts 2025
https://aepspe.com/blog/grok/
\
How To Cancel & Disable the V2K
First identify the specific frequencies that are being used for your V2K. Listen to the recorded files for your V2K.
Grok - add to the first program such that it will:
Scan 478.2 Mhz, 655.3 Mhz, and 671.5 Mhz. (for example)
Create a transmit frequency that is 180 degrees out of phase for each of these selected signals. Add a delay, if needed to accommodate the delay in signal processing, such that the 2 signals cancel each other. Optimize the transmission to completely cancel the incoming signal. Check the dB loudness to ensure it is reduced or eliminated.
Amplify each outgoing signal to cancel the incoming signal.
Continue until I hit the ESC button.
This is just one example, and may need to be modified. But the process is simple.
\
BE THE HERO! - You can do this!
Post your comments below when you have some recordings of your V2K or subliminal messaging. Also post the recordings on X.com or youtube.
Targeted Justice, Inc.
Apr 6
READ IN APP
Other Methods to Record V2K
You don’t have to use a fancy software program for Software Defined Radio (SDR).
Grok.com or any major AI can create a custom program for scanning frequencies and demodulating the signal. These signals were combined with the carrier wave using Amplitude Modulation (AM).
Grok can write a program (macro) for an Excel spreadsheet, or in BASIC, Python, or even HTML5 code. It can also write a stand-alone program that runs on your desktop.
Here is a sample logic that you can use to instruct Grok:
Using an SDR device, RX-888 is plugged into a USB Port. (for example)
Please use the device to scan all frequencies between 300 - 800 MHz. (might need to expand this frequency range later)
Find the loudest 20 signals, and demodulate them. Assume that Amplitude Modulation (AM) was used. (hold the receiver antenna near your ear.)
Identify voice signals on each, and save in separate files as mp3 format. Place the files on the desktop, and number them beginning with 1, and label them for the approximate frequency, ie., 1-478.2MHZ.
Identify the specific frequencies that are being used, and limit the scanning to those frequencies.
Continue this process until I hit the ESC button.
If done correctly, you will now have voice files on your desktop that includes your V2K and subliminal messaging that is being used on everyone.
Please comment below, if you have alternate methods or logic.
\
How to Use Grok: A Comprehensive Guide for Beginners and Experts 2025
https://aepspe.com/blog/grok/
\
How To Cancel & Disable the V2K
First identify the specific frequencies that are being used for your V2K. Listen to the recorded files for your V2K.
Grok - add to the first program such that it will:
Scan 478.2 Mhz, 655.3 Mhz, and 671.5 Mhz. (for example)
Create a transmit frequency that is 180 degrees out of phase for each of these selected signals. Add a delay, if needed to accommodate the delay in signal processing, such that the 2 signals cancel each other. Optimize the transmission to completely cancel the incoming signal. Check the dB loudness to ensure it is reduced or eliminated.
Amplify each outgoing signal to cancel the incoming signal.
Continue until I hit the ESC button.
This is just one example, and may need to be modified. But the process is simple.
\
BE THE HERO! - You can do this!
Post your comments below when you have some recordings of your V2K or subliminal messaging. Also post the recordings on X.com or youtube.
Aepspe | B2B Services Provider Blog
How to Use Grok: A Comprehensive Guide for Beginners and Experts 2025 - AepsPe Blog
Grok - Grok is a term that has gained significant traction in recent years, especially in the realms of technology, programming, and data analysis. But what
🔥1
Forwarded from ☪︎ Arabic Bedouin ☪︎
Media is too big
VIEW IN TELEGRAM
🔆The Golden Truth🔆
Celebrities are cowards!
In 2011, Donald Marshall came forward and revealed the hidden operations of the global elite. From a young age he was forced into the Illuminati network, where he witnessed events that the public was never supposed to know about.
Marshall exposed human cloning technology, explaining how it is secretly used to create and control living duplicates of people. He revealed the existence of underground cloning centers where this technology is applied for entertainment, blackmail, and manipulation.
In Part 4 of his disclosures, Marshall named the celebrities who attend these cloning centers. He explained that some of the most famous figures in music, Hollywood, and politics are not only aware of human cloning, but also participate in the secret subculture that surrounds it.
His testimony uncovered a hidden world where power and fame come with silence, and where human cloning is used as the ultimate tool of control.
Donald Marshall’s disclosures stand as a direct exposure of human cloning and the celebrities and elites who attend the centers where it takes place.
Part 4 disclosure: https://acrobat.adobe.com/link/track?uri=urn:aaid:scds:US:616b30c1-6ee1-4cc5-9281-6ffdfdf613df
Join: https://t.me/Vril_Droning_Lizards_Discussion
Celebrities are cowards!
In 2011, Donald Marshall came forward and revealed the hidden operations of the global elite. From a young age he was forced into the Illuminati network, where he witnessed events that the public was never supposed to know about.
Marshall exposed human cloning technology, explaining how it is secretly used to create and control living duplicates of people. He revealed the existence of underground cloning centers where this technology is applied for entertainment, blackmail, and manipulation.
In Part 4 of his disclosures, Marshall named the celebrities who attend these cloning centers. He explained that some of the most famous figures in music, Hollywood, and politics are not only aware of human cloning, but also participate in the secret subculture that surrounds it.
His testimony uncovered a hidden world where power and fame come with silence, and where human cloning is used as the ultimate tool of control.
Donald Marshall’s disclosures stand as a direct exposure of human cloning and the celebrities and elites who attend the centers where it takes place.
Part 4 disclosure: https://acrobat.adobe.com/link/track?uri=urn:aaid:scds:US:616b30c1-6ee1-4cc5-9281-6ffdfdf613df
Join: https://t.me/Vril_Droning_Lizards_Discussion
❤1