#Mac #Beta

Version 5.7.5-2825

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.5-2826

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Release

Version 5.7.5-2826

- The panel is now available in Surge Mac.
- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

Hi，我是深巷有喵配置的维护者。根据大家的反馈，特此对配置进行维护性修改。

1. 增加Surge-Alpha配置，保持以往的配置更新频率。

2. Surge-Alpha以外的配置将进行月更维护，每个月1号合入Surge-Alpha上个月的更新。

如果你追新，想及时用上最新版，可以选择Surge-Alpha配置。

3. 增加Surge-Developer配置，该配置仅在「开发者中国区用户推荐最小配置」的基础上增加策略组，规则等不会有任何改动。

更新日期：2024.09.01
版本：3.0.3

1. 修改代理测速URL。

https://github.com/Rabbit-Spec/Surge/tree/Master/Conf

#Mac #Beta

Version 5.7.6-2827

- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping=1234,5000-6000,7044,8000-9000, port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured earlier will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3297) is ready to test on iOS.

What to Test:

Hysteria2 与 TUIC 协议支持端口跳越，用于改善 ISP 对 UDP 的 QoS 问题。详见服务端说明。

`Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping 34,5000-6000,7044,8000-9000, port-hopping-interval0`

配置 `port-hopping` 参数后，配置前方的主端口号不再生效。

参数
- `port-hopping`：用于配置端口范围，逗号分隔，支持以-配置范围
- `port-hopping-interval`：变换端口号的时间间隔，默认为 30s

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2832

- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234,5000-6000,7044,8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3299) is ready to test on iOS.

What to Test:

- 修正开启端口跳越后，数据统计出现的一些问题
- 调整端口跳越配置参数的分隔符为 ;

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2833

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3300) is ready to test on iOS.

What to Test:

- 修正 UDP 连接统计相关的问题

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3300) is ready to test on iOS.

What to Test:

- 修正 UDP 连接统计相关的问题

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2834

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2835

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2836

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3301) is ready to test on iOS.

What to Test:

- 远程控制器新增维护菜单，可执行配置重载和更新操作（仅支持 Surge Mac）
- 新增图标 Sapphire

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2837

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2838

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

Surge Mac Beta 5.8.0 重要版本更新

由于传统的 utun 接管方案在新版系统下会产生众多问题，从 Surge Mac 5.8.0 版本开始，Surge Mac 将使用 Network Extension 作为增强模式接管系统网络。

- Surge Mac 的最低系统版本需求调整至 macOS 12
- 由于需要的权限不同，更新后需要手动进行授权操作
- vif-mode 参数将不再生效
- 增强模式现在可以和网络共享功能协同使用了，即可以直接创建出由 Surge 接管的 Wi-Fi（需要有线网络提供外网）
- 相比旧方案，新方案的最大吞吐量略有下降，我们会在之后给出具体数据。（非万兆网络忽略不计）

最近版本可能有诸多小问题，如果希望稳定请先暂缓更新。

#Mac #Beta

Version 5.8.0-2846

### Network Extension
- Due to numerous issues arising from the traditional utun takeover solution in newer system versions, starting from Surge Mac 5.8.0, Surge Mac will use Network Extension as the enhanced mode to take over the system network.
- The minimum system version requirement for Surge Mac is raised to macOS 12.
- Due to different required permissions, manual authorization operations is needed after updating.
- The vif-mode parameter will no longer be effective.
- Enhanced mode can now be used in conjunction with network sharing functionality, meaning you can directly create a Wi-Fi managed by Surge (requires wired network)

### Port Hopping

Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.8.0-2848

### Network Extension
- Due to numerous issues arising from the traditional utun takeover solution in newer system versions, starting from Surge Mac 5.8.0, Surge Mac will use Network Extension as the enhanced mode to take over the system network.
- The minimum system version requirement for Surge Mac is raised to macOS 12.
- Due to different required permissions, manual authorization operations is needed after updating.
- The vif-mode parameter will no longer be effective.
- Enhanced mode can now be used in conjunction with network sharing functionality, meaning you can directly create a Wi-Fi managed by Surge (requires wired network)

### Port Hopping

Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed