Snell Server 版本更新 v4.1.0 beta 1

- 更新 DNS 库 c-ares 至最新版本，以解决和特定 DNS 记录的兼容问题
- 在启动时新增当前使用的 DNS 服务器输出
- 新增 dns 参数，用于自定义 DNS 服务器地址，支持配置多个地址，如

[snell-server]
dns = 1.1.1.1, 8.8.8.8, 2001:4860:4860::8888

https://dl.nssurge.com/snell/snell-server-v4.1.0b1-linux-amd64.zip
https://dl.nssurge.com/snell/snell-server-v4.1.0b1-linux-i386.zip
https://dl.nssurge.com/snell/snell-server-v4.1.0b1-linux-aarch64.zip
https://dl.nssurge.com/snell/snell-server-v4.1.0b1-linux-armv7l.zip

#Mac #Beta

Version 5.7.5-2822

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.5-2824

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.5-2825

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.5-2826

- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- Panel is now available in Surge Mac.
- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

#Mac #Release

Version 5.7.5-2826

- The panel is now available in Surge Mac.
- DNS Forwarding Subsystem Optimization

- When the domain of a DNS query is one that should not be forwarded to the public network (e.g., .home.arpa, 1.0.168.192.in-addr.arpa), it will automatically determine the upstream DNS address and only forward to LAN DNS servers.
- Surge can now correctly respond to PTR requests for fake IPs, meaning that using the dig -x 198.18.23.87 command can be used to determine the original domain name corresponding to a fake IP.
- The DNS forwarder will now forward DNS requests to specific upstream servers based on [Host] section configuration.
- Directly respond with NOTIMP to unsupported DNS-SD PTR requests for fake IPs, without forwarding.

- When adding a rule for the current webpage, you can choose to add to an existing ruleset.
- Bug fixes.

Official Channel: @SurgeTestFlightFeed

Hi，我是深巷有喵配置的维护者。根据大家的反馈，特此对配置进行维护性修改。

1. 增加Surge-Alpha配置，保持以往的配置更新频率。

2. Surge-Alpha以外的配置将进行月更维护，每个月1号合入Surge-Alpha上个月的更新。

如果你追新，想及时用上最新版，可以选择Surge-Alpha配置。

3. 增加Surge-Developer配置，该配置仅在「开发者中国区用户推荐最小配置」的基础上增加策略组，规则等不会有任何改动。

更新日期：2024.09.01
版本：3.0.3

1. 修改代理测速URL。

https://github.com/Rabbit-Spec/Surge/tree/Master/Conf

#Mac #Beta

Version 5.7.6-2827

- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping=1234,5000-6000,7044,8000-9000, port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured earlier will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3297) is ready to test on iOS.

What to Test:

Hysteria2 与 TUIC 协议支持端口跳越，用于改善 ISP 对 UDP 的 QoS 问题。详见服务端说明。

`Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping 34,5000-6000,7044,8000-9000, port-hopping-interval0`

配置 `port-hopping` 参数后，配置前方的主端口号不再生效。

参数
- `port-hopping`：用于配置端口范围，逗号分隔，支持以-配置范围
- `port-hopping-interval`：变换端口号的时间间隔，默认为 30s

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2832

- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234,5000-6000,7044,8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3299) is ready to test on iOS.

What to Test:

- 修正开启端口跳越后，数据统计出现的一些问题
- 调整端口跳越配置参数的分隔符为 ;

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2833

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3300) is ready to test on iOS.

What to Test:

- 修正 UDP 连接统计相关的问题

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3300) is ready to test on iOS.

What to Test:

- 修正 UDP 连接统计相关的问题

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2834

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2835

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2836

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#iOS #TestFlight

Surge 5 5.100.0 (3301) is ready to test on iOS.

What to Test:

- 远程控制器新增维护菜单，可执行配置重载和更新操作（仅支持 Surge Mac）
- 新增图标 Sapphire

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2837

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

#Mac #Beta

Version 5.7.6-2838

- Adapted for macOS Sequoia, resolved some compatibility issues in enhanced mode.
- Hysteria2 and TUIC protocol now support port hopping to improve ISP's QoS issues with UDP. See the server documentation for details.

Proxy = hysteria2, 1.2.3.4, 443, password=pwd, port-hopping="1234;5000-6000;7044;8000-9000", port-hopping-interval=30

After configuring the port-hopping parameter, the primary port number configured in the front will no longer be effective.

Parameters:

- port-hopping: Used to configure the range of ports. Separated by commas and supports ranges configured with a hyphen.
- port-hopping-interval: The interval for changing port numbers. Defaults to 30 seconds

Official Channel: @SurgeTestFlightFeed

Surge Mac Beta 5.8.0 重要版本更新

由于传统的 utun 接管方案在新版系统下会产生众多问题，从 Surge Mac 5.8.0 版本开始，Surge Mac 将使用 Network Extension 作为增强模式接管系统网络。

- Surge Mac 的最低系统版本需求调整至 macOS 12
- 由于需要的权限不同，更新后需要手动进行授权操作
- vif-mode 参数将不再生效
- 增强模式现在可以和网络共享功能协同使用了，即可以直接创建出由 Surge 接管的 Wi-Fi（需要有线网络提供外网）
- 相比旧方案，新方案的最大吞吐量略有下降，我们会在之后给出具体数据。（非万兆网络忽略不计）

最近版本可能有诸多小问题，如果希望稳定请先暂缓更新。