Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2441
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2441
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2922) is ready to test on iOS.
What to Test:
- MITM 新增参数 auto-quic-block 用于控制新加入的自动屏蔽 QUIC 行为，默认开启
- 由于 QUIC SNI 提前功能的部分代码对全局的 TLS 会话产生了非预期影响，导致最近版本相关功能异常，暂时移除了该功能
- 其他问题修正
Surge 5 5.21.0 (2922) is ready to test on iOS.
What to Test:
- MITM 新增参数 auto-quic-block 用于控制新加入的自动屏蔽 QUIC 行为，默认开启
- 由于 QUIC SNI 提前功能的部分代码对全局的 TLS 会话产生了非预期影响，导致最近版本相关功能异常，暂时移除了该功能
- 其他问题修正
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2442
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2442
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2443
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2443
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2923) is ready to test on iOS.
What to Test:
- 恢复了 QUIC SNI 提取功能
- 由于 QUIC SNI 提取不能兼顾到所有的 QUIC 早期版本，导致 block-quic 有时不能正常工作，现在所有目标端口号为 443 的 UDP 包都被看作 QUIC 请求。
- UDP NAT 超时降低到 60s
- force-http-engine-hosts 与 [MITM] 的 hostname 行为修改，不再直接转由对应引擎处理，而是开启对应的协议识别器。避免在协议错误时导致完全不可用。
(相当于现在默认配置了 force-http-engine-hosts = *:80)
- 协议识别器支持多个分包的请求了，部分 Header 较大的 HTTP 请求在先前版本无法自动被识别为 HTTP。
- HTTPS 协议识别支持将空 SNI 的请求归类为 HTTPS。
- 协议识别器等待超时调整到 500ms。
Surge 5 5.21.0 (2923) is ready to test on iOS.
What to Test:
- 恢复了 QUIC SNI 提取功能
- 由于 QUIC SNI 提取不能兼顾到所有的 QUIC 早期版本，导致 block-quic 有时不能正常工作，现在所有目标端口号为 443 的 UDP 包都被看作 QUIC 请求。
- UDP NAT 超时降低到 60s
- force-http-engine-hosts 与 [MITM] 的 hostname 行为修改，不再直接转由对应引擎处理，而是开启对应的协议识别器。避免在协议错误时导致完全不可用。
(相当于现在默认配置了 force-http-engine-hosts = *:80)
- 协议识别器支持多个分包的请求了，部分 Header 较大的 HTTP 请求在先前版本无法自动被识别为 HTTP。
- HTTPS 协议识别支持将空 SNI 的请求归类为 HTTPS。
- 协议识别器等待超时调整到 500ms。
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2444
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2444
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2445
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2445
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2446
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2446
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2449
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2449
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2450
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2450
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2452
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2452
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2453
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2453
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2926) is ready to test on iOS.
What to Test:
- 修改了协议嗅探器的逻辑，不再预先假设协议类型进行探测，这表示 force-http-engine-hosts 参数的实际语意已变为“是否开启特定端口或主机的协议嗅探”，但出于兼容性考虑，不再修改该参数名称。
默认情况相当于下配置了 force-http-engine-hosts = *:80, *:443
现在可使用该参数开启对非标准端口的 TLS SNI 嗅探。
注：always-raw-tcp-hosts 参数的优先级高于该参数与 MITM 配置。
- 修正部分连接未能正确开启 MITM 的问题（非标端口号和 SNI 不匹配时）
- 尝试修正部分用户遇到的 Message too long 错误，如果仍然出现请反馈
- 一些细节问题和崩溃修正
Surge 5 5.21.0 (2926) is ready to test on iOS.
What to Test:
- 修改了协议嗅探器的逻辑，不再预先假设协议类型进行探测，这表示 force-http-engine-hosts 参数的实际语意已变为“是否开启特定端口或主机的协议嗅探”，但出于兼容性考虑，不再修改该参数名称。
默认情况相当于下配置了 force-http-engine-hosts = *:80, *:443
现在可使用该参数开启对非标准端口的 TLS SNI 嗅探。
注：always-raw-tcp-hosts 参数的优先级高于该参数与 MITM 配置。
- 修正部分连接未能正确开启 MITM 的问题（非标端口号和 SNI 不匹配时）
- 尝试修正部分用户遇到的 Message too long 错误，如果仍然出现请反馈
- 一些细节问题和崩溃修正
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2454
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2454
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2928) is ready to test on iOS.
What to Test:
- 修正 ASN 相关功能无效的问题
- 彻底修正 Message too long 错误
- 优化了 QUIC 类协议在 IPv6 下的表现
Surge 5 5.21.0 (2928) is ready to test on iOS.
What to Test:
- 修正 ASN 相关功能无效的问题
- 彻底修正 Message too long 错误
- 优化了 QUIC 类协议在 IPv6 下的表现
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2455
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2455
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2456
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2456
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2457
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2457
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2930) is ready to test on iOS.
What to Test:
- SOCKS 代理连接迁移至新架构，保证各参数行为一致
- 修正编辑策略组时错误信息无法显示的问题
- 再次修正部分低 MTU 网络下使用 QUIC 出现的问题
Surge 5 5.21.0 (2930) is ready to test on iOS.
What to Test:
- SOCKS 代理连接迁移至新架构，保证各参数行为一致
- 修正编辑策略组时错误信息无法显示的问题
- 再次修正部分低 MTU 网络下使用 QUIC 出现的问题
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2459
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2459
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Forwarded from Surge's Changelog
#Mac #Beta
Version 5.4.0-2460
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
4. MITM still requires hostname configuration to be activated, but the
5. Added the parameter
* The
* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.
Version 5.4.0-2460
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Completed support for ECN (Explicit Congestion Notification) of Vector (Surge Ponte) and TUIC protocols, significantly improving bandwidth performance in poor network environments.
* Due to compatibility issues, this function is turned off by default. Please enable it by configuring the
ecn=true parameter for a TUIC policy.* Added automatic recognition of HTTP/HTTPS protocols
1. Requests sent to ports 80/443 will wait for the client to send the first data packet and then determine whether it is a valid HTTP/HTTPS request to decide how to handle it. If it is not a valid HTTP request, or if the first packet is not received within 300ms, it will fall back to TCP forwarding mode. Therefore, for requests using port 80, there is no longer a need to configure the
force-http-engine-hosts parameter.2. Automatically recognizes the TLS Client Hello message and extracts SNI, adding rules for SNI and MITM hostname matching.
3. Protocol auto-recognition is only enabled for ports 80/443 because some protocols are initiated by the server sending data first, such as SSH, IMAP, FTP. Waiting for client data before proceeding will cause unnecessary delays for these requests. HTTP requests on other ports that need to be handled by the HTTP engine still need to be configured with
force-http-engine-hosts.4. MITM still requires hostname configuration to be activated, but the
tcp-connection parameter is no longer needed and will be effective for TCP requests by default.5. Added the parameter
always-raw-tcp-hosts, which forcibly shuts down active protocol detection for specific hostnames. It is written in the same way as the force-http-engine-hosts parameter.* The
DOMAIN, DOMAIN-SUFFIX, DOMAIN-KEYWORD rules have added an optional parameter extended-matching. When this parameter is set, the rule will also try to match both the SNI and the HTTP Host Header (or :authority).* Tips: If you want it to be effective only for SNI, you can use the AND logic rule combined with the
PROTOCOL,HTTPS rule.* Since forwarding QUIC traffic through TCP-based proxies can lead to performance issues and traffic waste, all proxy policies have added a
block-quic parameter, which can be set to auto (default), on, or off. When enabled, if QUIC traffic is encountered while using this policy, it will automatically use REJECT-NO-DROP to revert to HTTPS/TCP connections.* For the TUIC/WireGuard/Vector(Ponte) protocols, QUIC traffic will be allowed under
auto, while it will not be allowed for other proxy protocols under auto.* For QUIC traffic that hits the MITM hostname, it will also be automatically rejected.
* Improved compatibility of the HTTP engine and fixed compatibility issues with some non-standard self-implemented HTTP clients.
* Other improvements.