Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.2-2390
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Other improvements.
Version 5.3.2-2390
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.2-2391
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Version 5.3.2-2391
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Release
Version 5.3.2-2391
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Version 5.3.2-2391
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.2-2392
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Version 5.3.2-2392
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.3.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Release
Version 5.3.2-2392
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Version 5.3.2-2392
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.2-2393
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Version 5.3.2-2393
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Release
Version 5.3.2-2393
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Version 5.3.2-2393
* Surge Mac is now ready for macOS Sonoma.
* External resources can now be remotely managed and updated by Surge iOS.
* Fixed the issue where the location permission request could not be correctly triggered.
* Surge Web Dashboard upgraded to version 2.0.4.
* Other improvements.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2871) is ready to test on iOS.
What to Test:
- HTTP 捕获功能重做
- 相关设置不再存放于配置中，[Replica] 段已废弃。
- 新增开启捕获开关后的自动关闭设置，可根据时间、大小、请求数自动停止抓取
- 新增 MITM 自动开启，开启捕获开关后可对特定主机名额外开启 MITM。（即使 MITM 主开关未开启）
- 新增在开启捕获开关后，只保存 HTTP/HTTPS 请求的选项
- Wi-Fi Assist 和 Hybrid 功能将只在设备解锁后生效，避免造成不必要的电量与流量消耗。
- 新增 Inky 图标
Surge 5 5.21.0 (2871) is ready to test on iOS.
What to Test:
- HTTP 捕获功能重做
- 相关设置不再存放于配置中，[Replica] 段已废弃。
- 新增开启捕获开关后的自动关闭设置，可根据时间、大小、请求数自动停止抓取
- 新增 MITM 自动开启，开启捕获开关后可对特定主机名额外开启 MITM。（即使 MITM 主开关未开启）
- 新增在开启捕获开关后，只保存 HTTP/HTTPS 请求的选项
- Wi-Fi Assist 和 Hybrid 功能将只在设备解锁后生效，避免造成不必要的电量与流量消耗。
- 新增 Inky 图标
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2872) is ready to test on iOS.
What to Test:
- 修正了捕获过滤器可能无法生效的问题
- 其他 UI 细节修正
Surge 5 5.21.0 (2872) is ready to test on iOS.
What to Test:
- 修正了捕获过滤器可能无法生效的问题
- 其他 UI 细节修正
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.3-2394
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Version 5.3.3-2394
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.3-2395
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Version 5.3.3-2395
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2873) is ready to test on iOS.
What to Test:
- VIF 性能调优，经测试可在 iPhone 15 Pro 下 VIF 接管单线程跑满 2.5Gbps 有线网卡。（代理模式性能更佳）
- 修正一些细节问题
Surge 5 5.21.0 (2873) is ready to test on iOS.
What to Test:
- VIF 性能调优，经测试可在 iPhone 15 Pro 下 VIF 接管单线程跑满 2.5Gbps 有线网卡。（代理模式性能更佳）
- 修正一些细节问题
Apple TV做网关注意事项：
1. 只有支持Thread功能的Apple TV才支持做网关（第六代、第七代）。
2. 建议Apple TV使用以太网的方式联网。Wi-Fi联网做网关会有较大的性能损耗，不推荐。
3. 将Apple TV设置为HomeKit家居中枢。
4. 把Apple TV的IP地址设置为静态，防止DHCP租期到期后IP地址变更（IP地址要唯一）。
5. 启动Surge后，只需要把其他需要代理的设备网络设置为静态IP，网关指向Apple TV的IP，DNS改为198.18.0.2即可。
关于Ponte类型：
若要修改Apple TV的分流规则，可以在手机Surge →工具→ 远程控制器 → Apple TV设备里修改。
特别注意：
需要代理的设备的DNS是要改为198.18.0.2，而不是Apple TV的IP，更不要改为公共DNS。
Apple TV的网关模式并非 Surge iOS 所承诺和设计的功能，Surge作者已和 Apple 确认，Apple TV 由于需要支持 Thread 的 NAT64 所以开启了内核的 net.inet.ip.forwarding，但是不排除在未来版本的 tvOS 中出现变化。
1. 只有支持Thread功能的Apple TV才支持做网关（第六代、第七代）。
2. 建议Apple TV使用以太网的方式联网。Wi-Fi联网做网关会有较大的性能损耗，不推荐。
3. 将Apple TV设置为HomeKit家居中枢。
4. 把Apple TV的IP地址设置为静态，防止DHCP租期到期后IP地址变更（IP地址要唯一）。
5. 启动Surge后，只需要把其他需要代理的设备网络设置为静态IP，网关指向Apple TV的IP，DNS改为198.18.0.2即可。
关于Ponte类型：
• 若你没有公网IP，那么选择LAN Only即可，该选项只能在内网控制并连接Apple TV。• 若你有公网IP，并且路由器支持全锥形NAT，那么选择NAT Traversal即可，该选项可以让你在外也可以访问并控制Apple TV。• 若你有公网IP，但是路由器不支持全锥形NAT，则需要你选择Direct Access。该选项需要你去路由器后台手动设置端口转发地址以让你可以在外访问并控制Apple TV。若要修改Apple TV的分流规则，可以在手机Surge →工具→ 远程控制器 → Apple TV设备里修改。
特别注意：
需要代理的设备的DNS是要改为198.18.0.2，而不是Apple TV的IP，更不要改为公共DNS。
Apple TV的网关模式并非 Surge iOS 所承诺和设计的功能，Surge作者已和 Apple 确认，Apple TV 由于需要支持 Thread 的 NAT64 所以开启了内核的 net.inet.ip.forwarding，但是不排除在未来版本的 tvOS 中出现变化。
Forwarded from Surge TestFlight's Changelog
#tvOS #TestFlight
Surge 5 5.21.0 (2874) is ready to test on tvOS.
What to Test:
- VIF 性能调优，用作网关模式时的性能表现应该有所提升。
提升：网关模式并非 Surge iOS 所承诺和设计的功能，我们已和 Apple 确认，Apple TV 由于需要支持 Thread 的 NAT64 所以开启了内核的 net.inet.ip.forwarding。但是不排除在未来版本的 tvOS 中出现变化。
Surge 5 5.21.0 (2874) is ready to test on tvOS.
What to Test:
- VIF 性能调优，用作网关模式时的性能表现应该有所提升。
提升：网关模式并非 Surge iOS 所承诺和设计的功能，我们已和 Apple 确认，Apple TV 由于需要支持 Thread 的 NAT64 所以开启了内核的 net.inet.ip.forwarding。但是不排除在未来版本的 tvOS 中出现变化。
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.3-2396
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Version 5.3.3-2396
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
⚠️⚠️⚠️
Surge iOS 或 tvOS 端无限断开重启的先去掉 b7 去广告，或者换稳定版链接(因爬虫BUG 所致)
RULE-SET,https://raw.githubusercontent.com/blackmatrix7/ios_rule_script/release/rule/Surge/Advertising/Advertising.list,REJECT
DOMAIN-SET,https://raw.githubusercontent.com/blackmatrix7/ios_rule_script/release/rule/Surge/Advertising/Advertising_Domain.list,REJECT
Surge iOS 或 tvOS 端无限断开重启的先去掉 b7 去广告，或者换稳定版链接(因爬虫BUG 所致)
RULE-SET,https://raw.githubusercontent.com/blackmatrix7/ios_rule_script/release/rule/Surge/Advertising/Advertising.list,REJECT
DOMAIN-SET,https://raw.githubusercontent.com/blackmatrix7/ios_rule_script/release/rule/Surge/Advertising/Advertising_Domain.list,REJECT
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.3.3-2397
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Version 5.3.3-2397
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* Other improvements.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.21.0 (2875) is ready to test on iOS.
What to Test:
* 该版本中开始限制外部资源大小为不超过 10MB，避免异常的外部资源导致内存超限。（domain-set 除外）
新代理协议支持：Hysteria 2，Hysteria 2 是一个为不稳定和容易丢包的网络环境所优化的代理协议，基于 UDP/QUIC。
配置样例：
Proxy = hysteria2, 192.168.20.62, 443, password=pwd, sni=test.com, download-bandwidth 0
配置中支持所有 TLS 相关参数，download-bandwidth 为选填但推荐填写，单位为 Mbps。
Tips：
- Hysteria 2 的 Brutal 流控算法通过由用户主动提供其带宽上限作为参数的方式进行优化，关于 Hysteria 的流控策略请详见项目文档：https://v2.hysteria.network/zh/docs/misc/Hysteria-Brutal/
- 该参数应取用户当前网络带宽上限和服务器带宽上限中的较小值。
- 在不提供 download-bandwidth 参数时，Hysteria 2 将回退至 BBR 流控算法，这种情况下 Hysteria 与 TUIC 等基于 QUIC 的协议表现应该几乎一致。
- Surge 不支持客户端侧（即上传）的 Brutal 流控算法。
- 该版本尚未完成 UDP 转发支持，尚未提供 UI 配置，将在后续版本中提供。
Surge 5 5.21.0 (2875) is ready to test on iOS.
What to Test:
* 该版本中开始限制外部资源大小为不超过 10MB，避免异常的外部资源导致内存超限。（domain-set 除外）
新代理协议支持：Hysteria 2，Hysteria 2 是一个为不稳定和容易丢包的网络环境所优化的代理协议，基于 UDP/QUIC。
配置样例：
Proxy = hysteria2, 192.168.20.62, 443, password=pwd, sni=test.com, download-bandwidth 0
配置中支持所有 TLS 相关参数，download-bandwidth 为选填但推荐填写，单位为 Mbps。
Tips：
- Hysteria 2 的 Brutal 流控算法通过由用户主动提供其带宽上限作为参数的方式进行优化，关于 Hysteria 的流控策略请详见项目文档：https://v2.hysteria.network/zh/docs/misc/Hysteria-Brutal/
- 该参数应取用户当前网络带宽上限和服务器带宽上限中的较小值。
- 在不提供 download-bandwidth 参数时，Hysteria 2 将回退至 BBR 流控算法，这种情况下 Hysteria 与 TUIC 等基于 QUIC 的协议表现应该几乎一致。
- Surge 不支持客户端侧（即上传）的 Brutal 流控算法。
- 该版本尚未完成 UDP 转发支持，尚未提供 UI 配置，将在后续版本中提供。
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.4.0-2398
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
* Other improvements.
Version 5.4.0-2398
* The HTTP capture function has been significantly improved, with the addition of automatic shutdown and MITM automatic activation features. At the same time, related settings are no longer written into the main configuration.
* New proxy protocol supported: Hysteria2. Please visit the project page for more information. https://github.com/apernet/hysteria. Proxy declaration example:
Proxy = hysteria2, 1.2.3.4, 443, password=pwd, download-bandwidth=100.* Other improvements.
Forwarded from Surge TestFlight's Changelog