Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2349
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2349
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2350
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2350
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2351
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2351
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2352
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2352
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2353
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2353
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2839) is ready to test on iOS.
What to Test:
- 使用 iOS 17 beta 4 SDK 构建，Widget 恢复正常
- 修正快速切换模式下，从 IPv6 网络切换至非 IPv6 网络后，v6-vif 为 auto 时未能正确自动关闭 v6 vif 的问题
Surge 5 5.20.0 (2839) is ready to test on iOS.
What to Test:
- 使用 iOS 17 beta 4 SDK 构建，Widget 恢复正常
- 修正快速切换模式下，从 IPv6 网络切换至非 IPv6 网络后，v6-vif 为 auto 时未能正确自动关闭 v6 vif 的问题
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2354
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2354
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2842) is ready to test on tvOS.
What to Test:
请先阅读 Surge tvOS 版本测试指南 https://community.nssurge.com/d/1936-surge-tvos
Surge 5 5.20.0 (2842) is ready to test on tvOS.
What to Test:
请先阅读 Surge tvOS 版本测试指南 https://community.nssurge.com/d/1936-surge-tvos
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2842) is ready to test on iOS.
What to Test:
Surge tvOS 现已开放测试，详情请阅读 Surge tvOS 版本测试指南 https://community.nssurge.com/d/1936-surge-tvos
Surge 5 5.20.0 (2842) is ready to test on iOS.
What to Test:
Surge tvOS 现已开放测试，详情请阅读 Surge tvOS 版本测试指南 https://community.nssurge.com/d/1936-surge-tvos
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2843) is ready to test on tvOS.
What to Test:
- 修正上个版本使用 VMess 时可能崩溃的问题
Surge 5 5.20.0 (2843) is ready to test on tvOS.
What to Test:
- 修正上个版本使用 VMess 时可能崩溃的问题
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2844) is ready to test on iOS.
What to Test:
- 去除了 Surge tvOS 的授权绑定与订阅要求，现在 Surge tvOS 向所有 Surge iOS 用户开放。
Surge 5 5.20.0 (2844) is ready to test on iOS.
What to Test:
- 去除了 Surge tvOS 的授权绑定与订阅要求，现在 Surge tvOS 向所有 Surge iOS 用户开放。
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2845) is ready to test on tvOS.
What to Test:
- 修正外部资源请求未通过 Surge 处理的问题
- Apple TV 设备名称变化后将同步至其他设备
Surge 5 5.20.0 (2845) is ready to test on tvOS.
What to Test:
- 修正外部资源请求未通过 Surge 处理的问题
- Apple TV 设备名称变化后将同步至其他设备
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2849) is ready to test on iOS.
What to Test:
若使用了 Surge tvOS，请在更新该版本后，重新手动执行一次配置部署，否则 tvOS 版本可能无法正常工作
- 修正了配置 tvOS 时，部分选项可能出现的崩溃问题
- 修正了无法切换到 Dropbox 同步的问题
- 修正了部分卡片背景在展开时背景不完整的问题
- 一些文案和 UI 细节调整
Surge 5 5.20.0 (2849) is ready to test on iOS.
What to Test:
若使用了 Surge tvOS，请在更新该版本后，重新手动执行一次配置部署，否则 tvOS 版本可能无法正常工作
- 修正了配置 tvOS 时，部分选项可能出现的崩溃问题
- 修正了无法切换到 Dropbox 同步的问题
- 修正了部分卡片背景在展开时背景不完整的问题
- 一些文案和 UI 细节调整
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2849) is ready to test on tvOS.
What to Test:
请在更新 Surge iOS 后，重新手动执行一次配置部署，否则 tvOS 版本可能无法正常工作
- 由于 tvOS 无法手动更新外置资源，现在在 tvOS 里当外置资源 interval 设置为 0 或负数时，将自动调整为 86400 秒
- 修正一些其他外置资源相关问题
Surge 5 5.20.0 (2849) is ready to test on tvOS.
What to Test:
请在更新 Surge iOS 后，重新手动执行一次配置部署，否则 tvOS 版本可能无法正常工作
- 由于 tvOS 无法手动更新外置资源，现在在 tvOS 里当外置资源 interval 设置为 0 或负数时，将自动调整为 86400 秒
- 修正一些其他外置资源相关问题
Forwarded from Surge Mac's Changelog
#Mac #Release
Version 5.2.3-2354
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Version 5.2.3-2354
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
* Correct the issue where the opening position of the Dashboard main window may be incorrect.
Forwarded from Surge Mac's Changelog
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.4-2357
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.
Version 5.2.4-2357
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.4-2358
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.
Version 5.2.4-2358
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.
Forwarded from Surge TestFlight's Changelog
#tvOS #TestFlight
Surge 5 5.20.0 (2850) is ready to test on tvOS.
What to Test:
- 修正 WireGuard 无法使用的问题
- 修正设备名称变化后，无法同步到 iOS 端的问题
- 细节优化
Surge 5 5.20.0 (2850) is ready to test on tvOS.
What to Test:
- 修正 WireGuard 无法使用的问题
- 修正设备名称变化后，无法同步到 iOS 端的问题
- 细节优化
Forwarded from Surge TestFlight's Changelog
#tvOS #TestFlight
Surge 5 5.20.0 (2851) is ready to test on tvOS.
What to Test:
- 调整了外部资源更新时的 UA
- 修正了脚本可能无法被执行的问题
（我们正在更新 TestFlight 的控制系统，稍后将提供不参与 tvOS 版本 TestFlight 的选项）
Surge 5 5.20.0 (2851) is ready to test on tvOS.
What to Test:
- 调整了外部资源更新时的 UA
- 修正了脚本可能无法被执行的问题
（我们正在更新 TestFlight 的控制系统，稍后将提供不参与 tvOS 版本 TestFlight 的选项）
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.4-2359
* The Surge Dashboard can now operate the policy group and outbound options of remote devices.
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.
Version 5.2.4-2359
* The Surge Dashboard can now operate the policy group and outbound options of remote devices.
* Corrected the compatibility issue between VIF and specific devices.
* Surge Ponte improvments.