Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2823) is ready to test on iOS.
What to Test:
请注意该版本使用 iOS SDK 16 编译，无法使用可交互小组件功能。
· 文案补全
· 修正 MITM/H2 的一个低概率崩溃
5.5.4 RC1
Surge 5 5.20.0 (2823) is ready to test on iOS.
What to Test:
请注意该版本使用 iOS SDK 16 编译，无法使用可交互小组件功能。
· 文案补全
· 修正 MITM/H2 的一个低概率崩溃
5.5.4 RC1
Forwarded from Surge TestFlight's Changelog
Forwarded from Cool Scripts (小一)
尝试修复爆内存的问题
如果你在
可以尝试更新到最新版(记得先更新模块)
不要使用图3的 Surge 订阅链接
使用图2的 Base64 编码的订阅链接
感谢 Key 佬一直挂念着
Please open Telegram to view this post
VIEW IN TELEGRAM
Please open Telegram to view this post
VIEW IN TELEGRAM
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
⚠️版本回撤‼️
Version 5.2.3-2345
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge Mac's Changelog
#Mac #Beta
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Version 5.2.3-2346
* You can now create a new modifiable profile based on an existing profile. In this new profile, the selected sections will reference the corresponding content in the original profile and will automatically synchronize with the original profile. At the same time, unselected sections in the new profile can be modified freely without being affected by the original profile. (The UI for the detached profile feature.)
* The detached profile now can include the Enterprise profile.
* Fixed the issue that it was impossible to connect when the SSH server configured a banner.
* You can now use the UI to edit ShadowTLS parameters.
* Optimize performance in VIF v1 mode for ARM64 architecture. When the VIF mode is set to automatic, the new version will automatically use the v1 engine under M1/M2 processors, with a maximum performance of ~8Gbps, thereby avoiding compatibility and stability issues.
Forwarded from Surge TestFlight's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2826) is ready to test on iOS.
What to Test:
5.6.0 RC3
- 修正列表策略组视图下，策略组标题选项有可能更新不及时的问题
- 修正使用 DIRECT 策略作为 underlying-proxy 时，有可能导致 UDP 失败的问题
Surge 5 5.20.0 (2826) is ready to test on iOS.
What to Test:
5.6.0 RC3
- 修正列表策略组视图下，策略组标题选项有可能更新不及时的问题
- 修正使用 DIRECT 策略作为 underlying-proxy 时，有可能导致 UDP 失败的问题
Forwarded from Surge's Changelog
#iOS #TestFlight
Surge 5 5.20.0 (2827) is ready to test on iOS.
What to Test:
5.6.0 RC4
- 修正在同一轮策略测试中，如果混用不同的测试 URL，在二次测试时构造的 HTTP Header 可能不正确导致测试结果异常的问题
- 修正从后台打开主程序后，Panel 刷新可能无法正确被执行的问题
- 性能调优
Surge 5 5.20.0 (2827) is ready to test on iOS.
What to Test:
5.6.0 RC4
- 修正在同一轮策略测试中，如果混用不同的测试 URL，在二次测试时构造的 HTTP Header 可能不正确导致测试结果异常的问题
- 修正从后台打开主程序后，Panel 刷新可能无法正确被执行的问题
- 性能调优
Forwarded from App Dog
App 版本变更
🇺🇸 Surge 5 Free
5.6.0ꜛ (Jul 25, 2023)
Enhancements
· Comprehensive optimization of the request list page
· Ponte device sharing can now be initiated and managed directly on iOS
· The name of the source device will be displayed when viewing external requests
· Profile list added Create Linked Profile option for quick creation of detached profile
· Changed the logic of accessing the data protection area, now Surge can be properly activated in the locked screen state. (Except after rebooting)
· Will prompt when a CA certificate expiration is detected
· Single request exported .zip files support import back into Surge iOS, and will be displayed in the favorite requests
· Performance optimization
Problem Fixes
· Fixed the issue that in the same round of policy testing, if different test URLs are mixed, the HTTP Header constructed in the secondary test may be incorrect, leading to abnormal test results
· Fixed the issue that the Panel refresh may not be executed correctly after the main program is opened from the background
· Fixed the issue that the policy group title options under the list policy group view may not update in time
· Fixed the issue that using the DIRECT strategy as underlying proxy might cause UDP failure
· Fixed the issue that when using the SSH protocol, if the server side is configured with a banner, it cannot handshake properly
· Fixed some issues that may occur under the Lucid theme on iPad
· Fixed the issue that SSID related functions may not work correctly in some cases
· Fixed some problems that may occur when using TUIC v5 as underlying-proxy
· Fixed the issue that when directly using IPv6 address as vmess hostname, if WebSocket is enabled, the WebSocket request cannot be correctly constructed
· Fixed the issue that the use of certain invalid data in the DOMAIN-SET rule may cause a crash
· Fixed the crash that may be caused by profile errors
· Fixed the issue that the returned data of the replayed request cannot be viewed if there is compression
· Fixed the issue that the device list cannot be loaded when there is only a shared Ponte device
· Fixed some crashes that may occur with DNS over HTTP3
· Fixed the issue that when Surge Ponte is in a subnet CIDR not a multiple of 8, it will judge incorrectly leading to non-use of LAN direct connection
· Fixed some problems that may occur when using Surge Ponte
· Optimized the logic of re-establishing the main connection after network switching in TUIC/Ponte
🇺🇸 Surge 5 Free
5.6.0ꜛ (Jul 25, 2023)
Enhancements
· Comprehensive optimization of the request list page
· Ponte device sharing can now be initiated and managed directly on iOS
· The name of the source device will be displayed when viewing external requests
· Profile list added Create Linked Profile option for quick creation of detached profile
· Changed the logic of accessing the data protection area, now Surge can be properly activated in the locked screen state. (Except after rebooting)
· Will prompt when a CA certificate expiration is detected
· Single request exported .zip files support import back into Surge iOS, and will be displayed in the favorite requests
· Performance optimization
Problem Fixes
· Fixed the issue that in the same round of policy testing, if different test URLs are mixed, the HTTP Header constructed in the secondary test may be incorrect, leading to abnormal test results
· Fixed the issue that the Panel refresh may not be executed correctly after the main program is opened from the background
· Fixed the issue that the policy group title options under the list policy group view may not update in time
· Fixed the issue that using the DIRECT strategy as underlying proxy might cause UDP failure
· Fixed the issue that when using the SSH protocol, if the server side is configured with a banner, it cannot handshake properly
· Fixed some issues that may occur under the Lucid theme on iPad
· Fixed the issue that SSID related functions may not work correctly in some cases
· Fixed some problems that may occur when using TUIC v5 as underlying-proxy
· Fixed the issue that when directly using IPv6 address as vmess hostname, if WebSocket is enabled, the WebSocket request cannot be correctly constructed
· Fixed the issue that the use of certain invalid data in the DOMAIN-SET rule may cause a crash
· Fixed the crash that may be caused by profile errors
· Fixed the issue that the returned data of the replayed request cannot be viewed if there is compression
· Fixed the issue that the device list cannot be loaded when there is only a shared Ponte device
· Fixed some crashes that may occur with DNS over HTTP3
· Fixed the issue that when Surge Ponte is in a subnet CIDR not a multiple of 8, it will judge incorrectly leading to non-use of LAN direct connection
· Fixed some problems that may occur when using Surge Ponte
· Optimized the logic of re-establishing the main connection after network switching in TUIC/Ponte