New test build for (OSS and Prebuilt ROMS)
Changelog:
- Drop PELT (it has more latency on touch events than WALT)
- Enabled cpu-boost from CAF
- Using 100HZ ticker
- Minor scheduler improvements
- Upstreamed SLMK from Sultan's repo.
- Dropped 1804Mhz frequency from little/silver cluster (we are using only this frequency: 1708800hz)
- Fixed some camera memory leaks
- Boost DDR bus also when sched_boost is triggered while commiting a frame
What to test?
- Active battery drain
- Performance on games and benchmarks
No support for people using:
- Custom dtbo images
- Kernel tweakers (i.e ktweaks, FDE.AI, ZeetaTweaks, etc.)
NOTES:
- Test versions are at .177 upstream, when the branch reach stable it will be pushed to latest LTS Upstream
(Download below this post)
(Donate here too)
Changelog:
- Drop PELT (it has more latency on touch events than WALT)
- Enabled cpu-boost from CAF
- Using 100HZ ticker
- Minor scheduler improvements
- Upstreamed SLMK from Sultan's repo.
- Dropped 1804Mhz frequency from little/silver cluster (we are using only this frequency: 1708800hz)
- Fixed some camera memory leaks
- Boost DDR bus also when sched_boost is triggered while commiting a frame
What to test?
- Active battery drain
- Performance on games and benchmarks
No support for people using:
- Custom dtbo images
- Kernel tweakers (i.e ktweaks, FDE.AI, ZeetaTweaks, etc.)
NOTES:
- Test versions are at .177 upstream, when the branch reach stable it will be pushed to latest LTS Upstream
(Download below this post)
(Donate here too)
For the next stable version, Quantic will expand support to several devices of Xiaomi-SM8250:
- Xiaomi Mi 10 (umi, cmi, cas)
- Xiaomi Mi 10T Pro (apollo, apollopro)
- Redmi K30 Pro (lmipro)
- POCO F3 (Alioth).
Stay tuned 😏
- Xiaomi Mi 10 (umi, cmi, cas)
- Xiaomi Mi 10T Pro (apollo, apollopro)
- Redmi K30 Pro (lmipro)
- POCO F3 (Alioth).
Stay tuned 😏
New Quantic Kernel is out
Changelog:
- Compiled using ThinLTO
- Compiled using proton clang 13
- Tweaked scheduler for WALT
- Fix kernel CAF's and Xiaomi's Changes for CFI and ThinLTO
- Make little cluster as IRQ affinities
- Remove QoS low latency as fts is not compatible.
- Fix some QCACLD idle drain
- Tweaked WALT Predictive load algorithm
- Enabled Wireguard (introduced on LTS Upstream)
- Exposed Interfaces for battery idle (ACC)
- Patched vbmeta flags to expose locked bootloader state
- Allow sched boost functionality since we fixed bad tasks migration results by WALT.
- Using -O3 optimization.
Download below
Donate here
Note:
- Use GSI version for prebuilt vendor roms, GSI and MIUI (If you managed to boot it).
- Test versions are at .177 LTS tag.
BRUH PLEASE GIVE SOME FEEDBACK WITH BENCHMARKS AND BATTERY CONSUMPTION.
Changelog:
- Compiled using ThinLTO
- Compiled using proton clang 13
- Tweaked scheduler for WALT
- Fix kernel CAF's and Xiaomi's Changes for CFI and ThinLTO
- Make little cluster as IRQ affinities
- Remove QoS low latency as fts is not compatible.
- Fix some QCACLD idle drain
- Tweaked WALT Predictive load algorithm
- Enabled Wireguard (introduced on LTS Upstream)
- Exposed Interfaces for battery idle (ACC)
- Patched vbmeta flags to expose locked bootloader state
- Allow sched boost functionality since we fixed bad tasks migration results by WALT.
- Using -O3 optimization.
Download below
Donate here
Note:
- Use GSI version for prebuilt vendor roms, GSI and MIUI (If you managed to boot it).
- Test versions are at .177 LTS tag.
BRUH PLEASE GIVE SOME FEEDBACK WITH BENCHMARKS AND BATTERY CONSUMPTION.
Forwarded from Carlos Ayrton 🇲🇽 | AFK
Quantic_SM8250-OSS-APOLLO.zip
19.9 MB
New Quantic Kernel test version is out:
Changelog
- Inlined with my old LMI Source, should see mayor improvements in battery and UX/UI, with WALT and Optimized Sched
- Compiled with proton clang-13 and ThinLTO
Changelog for DTB version:
- Initial release with DTB from source
Please consider that DTB may not boot or probaly start slowly, if you don't have a way to restore boot and dtbo, I recommend you to use the other version (The non DTB zip) if you wanna help me to test dtb then flash DTB Zip please.
Thanks in advance
Changelog
- Inlined with my old LMI Source, should see mayor improvements in battery and UX/UI, with WALT and Optimized Sched
- Compiled with proton clang-13 and ThinLTO
Changelog for DTB version:
- Initial release with DTB from source
Please consider that DTB may not boot or probaly start slowly, if you don't have a way to restore boot and dtbo, I recommend you to use the other version (The non DTB zip) if you wanna help me to test dtb then flash DTB Zip please.
Thanks in advance
OnePlus stonks (tweet)
Quantic kernel as inline kernel on Alioth
Forwarded from Carlos Ayrton 🇲🇽 | AFK
Quantic_SM8250-MIUI-LMI.zip
19.9 MB
First alpha release of Quantic for MIUI (LMI)
Changelog:
- Initial release
Please kindly check if this boots for you, also if booted check current bugs, it's important
Changelog:
- Initial release
Please kindly check if this boots for you, also if booted check current bugs, it's important
Quantic_SM8250-MIUI-ALIOTH.zip
19.5 MB
First alpha release of Quantic for MIUI (Alioth)
Changelog:
- Initial release
Please kindly check if this boots for you, also if booted check current bugs, it's important
Changelog:
- Initial release
Please kindly check if this boots for you, also if booted check current bugs, it's important
Somebody here knows if Galaxy Tabs (s6 or s7) have OSS Kernel available? I am planning to get a SD855 or SD865 tablet but it seems that those are the only available as android tablets.
New Pixel Experience is out!
#lmi #QuanticKernel #PE
Changelog:
- Switched to OSS DTB
- Tweaked DTB to strip down debugs
- Cleaned up kernel MiCode bloat
- May Security patches
- Removed CAF Powerhal
- Introduced libperfmgr powerhal (aka Pixel PowerHal) from redfin and ported to Kona (adapted to Quantic)
- Massively improved UX matching real Pixel smooth experience.
- Kernel Upstreamed to 4.19.190
- CAF Kernel Upstreamed to: LA.UM.9.12.r1-11300-SMxx50.0
- Switched to PELT instead of WALT
- Fixed purple ink at low brightness
- Fixed brightness flicker
- Improved brightness algorithm from kernel
Bugs:
- DT2W
- Selinux Switched to permissive until libperfmgr gets sepolicy fixed.
Download here
Mirror here (https://host.carlosayrton.com)
I work hard on trying to bring you the best Experience to your POCO F2 Pro, consider sending me a Coffee or a beer would be so nice
#lmi #QuanticKernel #PE
Changelog:
- Switched to OSS DTB
- Tweaked DTB to strip down debugs
- Cleaned up kernel MiCode bloat
- May Security patches
- Removed CAF Powerhal
- Introduced libperfmgr powerhal (aka Pixel PowerHal) from redfin and ported to Kona (adapted to Quantic)
- Massively improved UX matching real Pixel smooth experience.
- Kernel Upstreamed to 4.19.190
- CAF Kernel Upstreamed to: LA.UM.9.12.r1-11300-SMxx50.0
- Switched to PELT instead of WALT
- Fixed purple ink at low brightness
- Fixed brightness flicker
- Improved brightness algorithm from kernel
Bugs:
- DT2W
- Selinux Switched to permissive until libperfmgr gets sepolicy fixed.
Download here
Mirror here (https://host.carlosayrton.com)
I work hard on trying to bring you the best Experience to your POCO F2 Pro, consider sending me a Coffee or a beer would be so nice
Some users were facing issues with gestures on lastest PE Update, for those GDrive link has been updated with the Update fix and for those who can access to drive because region restrictions or simply due to download cuota restricted, I opened a webhost where I'll host PE Updates until it reaches Official Status
Previous post here
Previous post here
Let's send Happy Birthday 🎂🎉 wishes to our friend and dev @SebaUbuntu 🥳 (time to update your bio)
New PixelExperience for lmi is out:
Changelog:
- Added Samsung's TW/HPB drivers
- Implemented UFS TW
- Kernel Upstreamed LTS to: 4.19.191
Bugs (to do list):
- Implement common DT2W from @Ramisky
- SELinux enforcing (address libperfmgr sepolicy).
Download here: https://host.carlosayrton.com/PixelExperienceLMI/PixelExperience_Plus_lmi-11.0-20210526-0433-UNOFFICIAL.zip
I don't know if I should post my donation link...
Changelog:
- Added Samsung's TW/HPB drivers
- Implemented UFS TW
- Kernel Upstreamed LTS to: 4.19.191
Bugs (to do list):
- Implement common DT2W from @Ramisky
- SELinux enforcing (address libperfmgr sepolicy).
Download here: https://host.carlosayrton.com/PixelExperienceLMI/PixelExperience_Plus_lmi-11.0-20210526-0433-UNOFFICIAL.zip
I don't know if I should post my donation link...