🫡Germans are supporting Ukraine! 🇺🇦

👉The above is from an article of the German magazine "Der Spiegel“
- (Original source)
- (full article in german)

This person who gave the interview is not part of our team and is not related to us in any way. He is from the organisation called DrukArmy. The article it shows how many Germans are willing to help Ukraine. There are hundreds of small factories across Germany who all are printing for Ukraine.

❓ What is the difference between DrukArmy and us?

DrukArmy are individual volunteers - you need your own printer and you pay for your own material. You also have to organise your own logistics and send the parts to a logistics hub. Usually you need one spool of filament every other day. This equals about 50€/week only for material which is 200€/month.

And here is the difference: By donating money to us, we are doing everything for you. You don’t need a printer to support Ukraine. You don’t need to organise material and the logistics. We do everything. You can simply make a plan or do monthly donations. We on the other hand will buy material, do the logistics and print the needed parts for Ukraine.

❓Why are we printing in Germany and not directly in Ukraine?

Russia is actively destroying Ukraine’s energy sources, infrastructure, and power lines. Power shortages and outages have been steadily escalating. While this situation receives limited media attention, our factory within Ukraine has provided a direct warning that production increases may be impossible or even decreasing due to the power cuts. Consequently, we, with our stable grid, must increase production to cover their needs.

👍 Your actions matters!

Without you, the supporters, the donors, the advertisers and the vocals who spread the word, without you, we cannot succeed!

🙏 THANK YOU ALL!

Special thanks to all the supporters from Germany, UK, Australia, France, Belgian, Switzerland, Finland, Poland, Spain, Austria, Sweden, Norway, USA, Canada, even Iranian protesters are donating! And thank you to all the other donors from the other countries as well!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⚡️The daily business

🔴 The production runs every day. There is not a single day when the printers are not running. Even when you should actually be in bed because you are sick, the printers are still being operated!

ℹ️ Ukraine needs supplies. Lots of supplies. More than we can currently produce. This box contains 500 individual items that will be used for 500 spezial gifts. The problem is that each gift requires a total of 5 ingredients. And they need 100 gifts per day. Our factory is able to produce 2 ingredients for this special gift. All the other necessary parts are coming from other sources like DrukArmy or similar.

✏️ stay tuned for more information on this channel. Hit subscribe and check out comment section down below.

👍 Be a part of this project! Donate through our PayPal page here:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🤫 Here are some statistics

This graph shows the energy consumption of the printers. By comparing this to your own household, you’ll likely see that we’ve consumed the same amount of energy as a single person in a whole year! (If he doesn’t use air conditioning.) If we now calculate the planned consumption for the rest of 2026 (it’s currently mid-March), this means the factory of 3D printers will reach a total consumption of nearly 10,000 kWh per year! (This alone is about €2,800.)

📌 This year was all about maintenance and replacing printers. We acquired three new ones and replaced three old ones, but unfortunately, this led to an increase in material consumption. This resulted in higher logistic costs, increased energy consumption, and more work in general. To cover the workload, we reduced the main job to a part-time position, which unfortunately also reduces personal income.

This leads to one single conclusion:
the project is highly reliant on the community.

🔴 It’s crucial to secure more supporters to cover all the costs. Everyone reading this should dedicate some time to acquiring new supporters. We’ve noticed that our core group of supporters is relatively small, and the top 10 supporters contribute approximately 75% of all the money.

📣 If we can shift this distribution, the project would become more evenly funded, potentially leading to a higher production outcome.

🆘 Help us to remain a constant supplier for the 59th mechanised special brigade to fight the illegal invasion!

✏️ If you have any questions, please leave a comment below.

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💯 Production madness 💯

🔼 Day in, day out... we produce!
We produce as much as we can. Each printer can produce 16 of these components in 24 hours. This specific part is very complicated, and we need a lot of these.

🔽Unfortunately, some printers are slowly breaking down, which means we have to allow much more time for repairs. But when printers that are only designed to last 5,000 hours now have more than 8,000 hours on them, it’s probably time to slowly replace them.

⚠️ Therefore, we will need to spend more money on new printers in the coming months in order to be able to print at full capacity again.

⁉️ Would you like to support us in this endeavor? Help us make the factory powerful again!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Help us to achieve our goals through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

PEST CONTROL AS ITS BEST!!

Another saturday,another pest control video from Ukraine.
It doesn't matter is it just a "normal" dropped munition or a "Frog",a mine that is dropped from a drone to wait its prey aka ruzzian invader to shred it to pieces..🧌💥☠️

There are few good reasons why WE are the best way to support Ukraine;

A: ALL of the donated money goes to helping Ukraine,we take nothing to ourselves unlike "charity foundations" do.
B:Best way how to decrease the deaths of Ukrainian warriors is to help them killing the invaders remotely before they get too close.
C:With our products, designed together with AFU the UAV battalions of the 59th brigade have taken more than a full ruzzian BRIGADE out of action.
Most of them have resigned from life permanently.
You can try to ask from them how good our products are...😏

We have those wonderful people who have donated over 2 years and will continue,but we need more support.
We can not deliver even close to what is asked from us.
Consider donating,the best way to make a difference!.

Also big thanks to those friendly channels who support our work:

Torchline
Intel Slava Ukraini
Ukraine Journal
Ukraine News Channel

With all of these people who run these channels we have a common goal:To make Ukraine safe and free again!!


✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🆕 Count the parcels! 🆕

Leave a comment below with your guess!

📌 These boxes are filled with plastics that will soon be turned into parts for Ukraine. Special parts that are rather gifts which will be given to our very friendly and handsome invaders, you might know which gifts 😉

This is all financed by you!

⚠️ Right now, our bank account is completely empty. All our funds have been used for this delivery. We are also covering the risk of a significant increase in plastic prices because of the Iranian war, which is why we decided to order more than we currently have in our account.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 support us and defend Ukraine from your home desk!

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🆕 New parts in production

➡️We frequently change our parts due to specific orders from Ukraine. This one is requested from our friends from the 59th brigade. The goal is to print ~2000 of these parts.

⚠️We need YOU to achieve this goal quickly!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

‼️the 59th Brigade needs assistance ‼️

This is a special post for our friends in Ukraine. As you are aware, we are in close collaboration with the military. However, they occasionally require direct financial assistance. The Volkswagen T5 bus used to transport our parts to frontline positions requires maintenance and repairs. It would be very helpful if you could consider financial support directly to the military.

Here is the original message from Ukraine:

Друзі бажаю непохитного 🫡
Потрібна фінансова допомога на ремонт автобуса т5 🙏
Ціна ремонту 50 тисяч гривень 😞
Дякую за любу допомогу 😎🫡🙏🇺🇦

Зібрали на сьогодні 6 тисяч гривень 😞

59 бригада Ремонт т5

🎯Ціль: 50 000.00 ₴

🔗Посилання на банку
https://send.monobank.ua/jar/8PY25igF6t

💳Номер картки банки
4874 1000 2573 1616

Translation:
Friends, I wish you unwavering support 🫡
We need financial assistance for the repair of a T5 bus 🙏
Repair price 50 thousand hryvnias 😞
Thank you for all your help 😎🫡🙏🇺🇦

We have collected only 6,000 hryvnias today 😞

59th brigade Repair T5

Goal: 50,000.00 ₴ ≈ 986€

🛫 Bank link:
https://send.monobank.ua/jar/8PY25igF6t

💳 Bank card number:
4874 1000 2573 1616

📣New Platform!📣

Since our project is continuously growing, we have to expand our reach to other platforms as well. There is one good platform which works like the old twitter. Have you heard about bluesky before?

📣 Check out our profile!

👍 https://bsky.app/profile/printingplatoon.bsky.social

Disclaimer:

we are not leaving telegram, we will now be on both platforms simultaneously to reach more people. If you already are on bluesky, you can follow us and repost everything we are posting there to spread the word across the new platform.

If you already are on bluesky, then please follow and repost our postings there to reach a greater audience. If you have any questions related to our profile on bluesky, then please write a personal message to the profile on bluesky itself.

All donations via either telegram or on bluesky will end up at the same bank account even if the donation link is different. This is due to internal reasons.

📱 Paypal donation link (from telegram)✔️

📱 Paypal donation link (from bluesky) ✔️