3rd Printing Platoon🇺🇦🫡
338 subscribers
45 photos
33 videos
57 links
Home of the 3rd Printing Platoon!
Download Telegram
⁉️What is that?⁉️

ℹ️This is an inside view of our 3d printing factory. Every month, or better to say: every 600h of printing, we have to replace the surface we are printing on. The printers are running close to 20h/day and 30days a month.

ℹ️This replacement is part of the normal monthly maintenance of the printers. The buildplate you see here has already seen over 2000 parts for our newly developed bottles.

ℹ️ just for your information: a new printer has been arrived which is replacing a totally worn out printer. With over 9000 printing hours we retire the printer. The replacement parts and the time of repairing the printer would cost more than a new printer. That’s why we have decided to buy a new one as a replacement.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
👍12❤‍🔥6🫡32🤩1
This media is not supported in your browser
VIEW IN TELEGRAM
Finally!!

Yesterday I was telling that I'm sorry about not showing our products in use,and there you go!!😁

This is the very harsh truth for the orcs:They can't hide,there is no need to run and if they don't watch where they step....
Boom,no more legs or genitals what is nothing but right and secure way to take care that those dirty bastards will not make new ones anymore!!

If you want to do your part,spare a little bit of money to get rid of an orc or few,please consider donating.
If you can't afford to do it,spread the word.

We MUST help Ukraine as much as we can!!

DEATH to the ruzzians!!🧌🪦
SLAVA UKRAINI!!🫡🇺🇦❤️🤝

Also thanks to our friendly channels for sharing our work,it helps and means a lot to us.🤝

Link to the donation site 👇🏻

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4
15👍8🫡2❤‍🔥1
This media is not supported in your browser
VIEW IN TELEGRAM
This is the moment what we in the 3rd Printing Platoon have been waiting for,you who make our work possible have been waiting to see what our new products do and now we all see it together!!🤝

As the video shows,two orcs are walking carelessly somewhere they should not walk,and it causes that they are lucky enough to find the mines we produce parts to!!😌
Probably both of them would have died anyway but FPV's finished the job,or I can say :Finnished...😁

I can't tell too much about the mines,but we produce roughly 50% of the parts for them,and that costs around 5€/mine. So basically someone who donated 10€ last month made this possible!
Just think of what your 100€ donation costs to those bastards!!😏

Earlier the "bottles" dropped from the drones were our bread and butter,now the drones are not that easily available/are too easy to intercept and this is partially the reason why it is better to stay in defence with the mines,even though many times the drone with full batch of munition can be lost too..😒

But this video was the FIRST time when those mines were filmed in use and you have a natural priviledge to see it.🫡
We thank everyone who donates or supports our work in any way,also the 59th brigade and Ukraine thanks you.
If you have any questions or you want to know more,you can find a lot of footage from the 155mm NATO channel,also feel free to contact me personally
@LordOjala.

DEATH to the invaders!!🧌🪦
SLAVA UKRAINI!!🫡🇺🇦❤️🤝

Link to the donation site 👇🏻

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4
👏2213🔥5👍3🫡3😁1
🤫The daily business…🤫

This is how it looks like since 2 years now. Printing, packing, restocking and repeat. Unofficially we have started our project in February 2024 with a very small amount of printed parts. But since then, we have used over 2000 kg of material shipped over to Ukraine through many volunteers.

🙏 A big thank you to all of our supporters. The small ones as well as the big ones. Without you as the back-bone of this project, Ukraine would not be able to withstand that constant high pressure. 🙏

✏️ If you have any questions, please leave a comment below.

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
17👍3🫡3
This media is not supported in your browser
VIEW IN TELEGRAM
This is what we all want to see!...

-The absolutely perfect work of the Ukrainian drone operators of the 59th brigade 🇺🇦🫡
-Using the products of the 3rd Printing Platoon 💥
-Thermal vision showing everything,not leaving any room for guessing...🧌🪦
Just few €/drop...🤷🏻

Again the end of the month is soon,and what we have been able to collect in this month basically decides how much we can deliver during the next month. And... There is still room before our monthly goal is full..
This month has been tough for us,we needed a new printer and soon another
was broken too...🙄😑

Also as I hinted earlier,we are again giving few gifts to the people who have donated during this month.
Nobody has an advantage,winners will be drawn. There will be something cool in share,like a flag of the Unmanned Aerial Forces and a chevron of the 59th Brigade

Keep supporting us,you support Ukraine, AFU, freedom and what is RIGHT!!

Too many times I have promised and forgotten to thank all the friendly channels who support us by sharing our work and in other ways too,so:

-Torchline Channel/Sir Dystic🫡🤝
-Intel Slava Ukraini 🫡🤝
-Ukraine Journal/Dianna 🫡🤝
-Ukraine News Channel/Dirk 🫡🤝

Also big thanks to everyone who helps in any way!!🫡🤝❤️

Let's drive the orcs out of Ukraine!
SLAVA UKRAINI!!🫡🇺🇦🤝❤️

Link to the donation site 👇🏻

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

For other payment options you can contact me directly @LordOjala
🥰12🔥43👍1
👀 Products assembly 👀

ℹ️ Can you see our products? This is how the preparation looks like. In a well hidden basement and packed in boxes. It is only an intermediate stage, because from there the products continue on to final assembly.

ℹ️ Approximately 150 such products are manufactured every day. It highly depends on the supply of parts for the assembly. The more parts they get, the more final products will be produced. And this is where your support is kicking in. Every single donor is needed to keep the production steady as it is.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
❤‍🔥123
This media is not supported in your browser
VIEW IN TELEGRAM
Our new products in action!!

2 dumb ruzzian pigs were advancing carelessly somewhere in Ukraine, probably dreaming of vodka and goats.
"When I get back to the swamps I will drink Myself to half dead".
"When I get back to My shack I want to find the best breeding goats in the whole ruzzia"...
Well... At the start of the video you can see 2 "little puffs" in the distance.
Those were the same orcs who did not find goats,they found the mines we are producing parts to.😉

Later the FPV drone goes to check the aftermath and at least we are extremely satisfied: 2 mines,2 explosions,2 immediately dead orcs.
Though nobody doesn't care did they suffer or not, it looks like they unfortunately did not suffer much.😥

So... Our "Frogs" are very effective,and because the 59th brigade is quite stretched,they just need to take care of their defence rather than attacking and for this use our products are just great:
Dropped where ever the orcs may move and they patiently wait until someone gets too near.

Producing the parts from our side costs around 5€/mine.
It means that by donating a 50€ you guarantee the production of 10 "Frogs" what in theory means 5-15 more dead orcs and few wounded ones depending on how close they move each other.
Please consider donating,those who do that say it has been the most well spent money ever!!🤗🤝
I would like to remind and also tell it to the new people that we do not take any of the donated money to ourselves.
EVERYTHING goes to the materials,spare parts for the printers, electricity, shipping...
We do this for free,from the moment we wake up till the minute we go to bed. This time and effort is our donation.🫡
If you can't afford to donate but you want to help,you can share our post and spread the word,it helps more than you think!👍🏻
And you WILL see what your money is turned to,we show at least once a week how our products erase ruzzians.

Thanks to the friendly channels who support us by sharing these updates, it's a crucial help and those channels prove the unity between us who want to help Ukraine.

DEATH to the enemies!🧌⚰️🪦
GLORY to UKRAINE!!🫡🇺🇦❤️🤝

Link to the donation site 👇🏻

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4
🥰9👏2
🫡Germans are supporting Ukraine! 🇺🇦

👉The above is from an article of the German magazine "Der Spiegel“
- (Original source)
- (full article in german)

This person who gave the interview is not part of our team and is not related to us in any way. He is from the organisation called DrukArmy. The article it shows how many Germans are willing to help Ukraine. There are hundreds of small factories across Germany who all are printing for Ukraine.

What is the difference between DrukArmy and us?

DrukArmy are individual volunteers - you need your own printer and you pay for your own material. You also have to organise your own logistics and send the parts to a logistics hub. Usually you need one spool of filament every other day. This equals about 50€/week only for material which is 200€/month.

And here is the difference: By donating money to us, we are doing everything for you. You don’t need a printer to support Ukraine. You don’t need to organise material and the logistics. We do everything. You can simply make a plan or do monthly donations. We on the other hand will buy material, do the logistics and print the needed parts for Ukraine.

Why are we printing in Germany and not directly in Ukraine?

Russia is actively destroying Ukraine’s energy sources, infrastructure, and power lines. Power shortages and outages have been steadily escalating. While this situation receives limited media attention, our factory within Ukraine has provided a direct warning that production increases may be impossible or even decreasing due to the power cuts. Consequently, we, with our stable grid, must increase production to cover their needs.

👍 Your actions matters!

Without you, the supporters, the donors, the advertisers and the vocals who spread the word, without you, we cannot succeed!

🙏 THANK YOU ALL!

Special thanks to all the supporters from Germany, UK, Australia, France, Belgian, Switzerland, Finland, Poland, Spain, Austria, Sweden, Norway, USA, Canada, even Iranian protesters are donating! And thank you to all the other donors from the other countries as well!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
16👍5🫡2🥰1
This media is not supported in your browser
VIEW IN TELEGRAM
⚡️The daily business

🔴 The production runs every day. There is not a single day when the printers are not running. Even when you should actually be in bed because you are sick, the printers are still being operated!

ℹ️ Ukraine needs supplies. Lots of supplies. More than we can currently produce. This box contains 500 individual items that will be used for 500 spezial gifts. The problem is that each gift requires a total of 5 ingredients. And they need 100 gifts per day. Our factory is able to produce 2 ingredients for this special gift. All the other necessary parts are coming from other sources like DrukArmy or similar.

✏️ stay tuned for more information on this channel. Hit subscribe and check out comment section down below.

👍 Be a part of this project! Donate through our PayPal page here:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
❤‍🔥93👏3🫡2
This media is not supported in your browser
VIEW IN TELEGRAM
3d printed parts at work!! 💥

This is again a video that is also a reward to those who have donated,and just nice to look because of the thermal image...😏
This shows how ruzzians are being hunted more and more during the night too.
It must be fun when you are not safe anywhere at any time.
Our products may be waiting somewhere on the ground or they can be dropped straight to the (mostly)
empty head of the invaders.☠️

We were not planning to give prizes this month but... Why not??🤷🏻
We most definetely want to give something back to those who help us and the prizes are the same as last month: A flag of the Unmanned Aerial Forces and a chevron of the 59th brigade.
(Not eBay crap,these are from the brigade itself..)
These will be given randomly,with a draw between all the people who have donated during this month.
Winners will be shown in our other home channel,the 155mm NATO channel. From there you can find more of our posts/videos if you want to see some pest control...😉😁

At the end I must remind that ruzzians don't care how much munition Ukraine has. The demand from the brigade is huge and we need all the help from everyone.
Consider donating, everything matters and you can't find a better way to help Ukraine than helping to remove the problem!!


Thanks to ALL of our friendly channels who support us and share our work!!🫡🤝❤️

Let's keep the show going,Ukraine needs us.

DEATH to the occupiers!!🧌⚰️
GLORY to UKRAINE!!🫡🇺🇦🤝❤️

Link to the donation site 👇🏻
Also other payment options are possible,for those you can contact me directly @LordOjala

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4
❤‍🔥13
🤫 Here are some statistics

This graph shows the energy consumption of the printers. By comparing this to your own household, you’ll likely see that we’ve consumed the same amount of energy as a single person in a whole year! (If he doesn’t use air conditioning.) If we now calculate the planned consumption for the rest of 2026 (it’s currently mid-March), this means the factory of 3D printers will reach a total consumption of nearly 10,000 kWh per year! (This alone is about €2,800.)

📌 This year was all about maintenance and replacing printers. We acquired three new ones and replaced three old ones, but unfortunately, this led to an increase in material consumption. This resulted in higher logistic costs, increased energy consumption, and more work in general. To cover the workload, we reduced the main job to a part-time position, which unfortunately also reduces personal income.

This leads to one single conclusion:
the project is highly reliant on the community.

🔴 It’s crucial to secure more supporters to cover all the costs. Everyone reading this should dedicate some time to acquiring new supporters. We’ve noticed that our core group of supporters is relatively small, and the top 10 supporters contribute approximately 75% of all the money.

📣 If we can shift this distribution, the project would become more evenly funded, potentially leading to a higher production outcome.

🆘 Help us to remain a constant supplier for the 59th mechanised special brigade to fight the illegal invasion!

✏️ If you have any questions, please leave a comment below.

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
🫡10🙏2
Explosions to the saturday!!💥

As promised,there will be no saturday without showing how our products destroy the ruzzian pigs,the individual cells of the worst plague this planet has EVER carried on its surface.

This video shows a destruction of one ruzzian assault group,location unknown.

Most of you already know what we do, but in short:
We are the 3rd Printing Platoon,a small group of people who 3d print munition to the 59th separate mechanised assault brigade of the Armed Forces of Ukraine.
Our work is funded by those people who;
-Want to help Ukraine
-Do not accept the ruzzians invading Ukraine
-Think that Ukraine is being left to fight alone.
-Are willing to give something away from themselves to do the right thing.

Through us you can help too.
We are NOT a "charity foundation" that takes at least half of your donation to themselves.
We do NOT take anything to ourselves, everything we get goes to helping Ukraine.

Many of you are probably aware about the situation in Ukraine at the moment:ruzzians are unable to gain ground,and Ukraine is taking back what belongs to them and this is the reason why our help is very much needed,we are being relied on heavily and we want to help as much as possible but we can not do it alone,we need YOUR 🫵🏻 help.

Thanks to everyone who has spared something to help us,thanks to those channels that help us to spread the word, thanks to EVERYONE who has helped in any way in our journey towards a better world without the ruzzian horde.
🫡🤝❤️

If you got interested,you can just donate via Paypal link,if you want to know more you can find a huge amount of footage about our work from the printing itself to usage of them from our own channel or the 155mm NATO channel.

DEATH to the enemies,victory WILL BE OURS!!🧌💥☠️

SLAVA UKRAINI!!🫡🇺🇦🤝❤️

https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4
Media is too big
VIEW IN TELEGRAM
🫡8🔥61
This media is not supported in your browser
VIEW IN TELEGRAM
💯 Production madness 💯

🔼 Day in, day out... we produce!
We produce as much as we can. Each printer can produce 16 of these components in 24 hours. This specific part is very complicated, and we need a lot of these.

🔽Unfortunately, some printers are slowly breaking down, which means we have to allow much more time for repairs. But when printers that are only designed to last 5,000 hours now have more than 8,000 hours on them, it’s probably time to slowly replace them.

⚠️ Therefore, we will need to spend more money on new printers in the coming months in order to be able to print at full capacity again.

⁉️ Would you like to support us in this endeavor? Help us make the factory powerful again!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Help us to achieve our goals through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
🫡96
Media is too big
VIEW IN TELEGRAM
PEST CONTROL AS ITS BEST!!

Another saturday,another pest control video from Ukraine.
It doesn't matter is it just a "normal" dropped munition or a "Frog",a mine that is dropped from a drone to wait its prey aka ruzzian invader to shred it to pieces..🧌💥☠️

There are few good reasons why WE are the best way to support Ukraine;

A: ALL of the donated money goes to helping Ukraine,we take nothing to ourselves unlike "charity foundations" do.
B:Best way how to decrease the deaths of Ukrainian warriors is to help them killing the invaders remotely before they get too close.
C:With our products, designed together with AFU the UAV battalions of the 59th brigade have taken more than a full ruzzian BRIGADE out of action.
Most of them have resigned from life permanently.
You can try to ask from them how good our products are...😏

We have those wonderful people who have donated over 2 years and will continue,but we need more support.
We can not deliver even close to what is asked from us.
Consider donating,the best way to make a difference!.

Also big thanks to those friendly channels who support our work:


Torchline
Intel Slava Ukraini
Ukraine Journal
Ukraine News Channel

With all of these people who run these channels we have a common goal:To make Ukraine safe and free again!!


✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
👍102👏2🏆1
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 Count the parcels! 🆕

Leave a comment below with your guess!

📌 These boxes are filled with plastics that will soon be turned into parts for Ukraine. Special parts that are rather gifts which will be given to our very friendly and handsome invaders, you might know which gifts 😉

This is all financed by you!

⚠️ Right now, our bank account is completely empty. All our funds have been used for this delivery. We are also covering the risk of a significant increase in plastic prices because of the Iranian war, which is why we decided to order more than we currently have in our account.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 support us and defend Ukraine from your home desk!

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
👏94🫡4
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 New parts in production

➡️We frequently change our parts due to specific orders from Ukraine. This one is requested from our friends from the 59th brigade. The goal is to print ~2000 of these parts.

⚠️We need YOU to achieve this goal quickly!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦
Please open Telegram to view this post
VIEW IN TELEGRAM
👍112
‼️the 59th Brigade needs assistance ‼️

This is a special post for our friends in Ukraine. As you are aware, we are in close collaboration with the military. However, they occasionally require direct financial assistance. The Volkswagen T5 bus used to transport our parts to frontline positions requires maintenance and repairs. It would be very helpful if you could consider financial support directly to the military.

Here is the original message from Ukraine:
Друзі бажаю непохитного 🫡
Потрібна фінансова допомога на ремонт автобуса т5 🙏
Ціна ремонту 50 тисяч гривень 😞
Дякую за любу допомогу 😎🫡🙏🇺🇦

Зібрали на сьогодні 6 тисяч гривень 😞

59 бригада Ремонт т5

🎯Ціль: 50 000.00 ₴

🔗Посилання на банку
https://send.monobank.ua/jar/8PY25igF6t

💳Номер картки банки
4874 1000 2573 1616

Translation:
Friends, I wish you unwavering support 🫡
We need financial assistance for the repair of a T5 bus 🙏
Repair price 50 thousand hryvnias 😞
Thank you for all your help 😎🫡🙏🇺🇦

We have collected only 6,000 hryvnias today 😞

59th brigade Repair T5

Goal: 50,000.00 ₴ ≈ 986€

🛫 Bank link:
https://send.monobank.ua/jar/8PY25igF6t

💳 Bank card number:
4874 1000 2573 1616
Please open Telegram to view this post
VIEW IN TELEGRAM
4🔥2👍1
📣New Platform!📣

Since our project is continuously growing, we have to expand our reach to other platforms as well. There is one good platform which works like the old twitter. Have you heard about bluesky before?

📣 Check out our profile!

👍 https://bsky.app/profile/printingplatoon.bsky.social

Disclaimer:
we are not leaving telegram, we will now be on both platforms simultaneously to reach more people. If you already are on bluesky, you can follow us and repost everything we are posting there to spread the word across the new platform.


If you already are on bluesky, then please follow and repost our postings there to reach a greater audience. If you have any questions related to our profile on bluesky, then please write a personal message to the profile on bluesky itself.

All donations via either telegram or on bluesky will end up at the same bank account even if the donation link is different. This is due to internal reasons.

📱 Paypal donation link (from telegram)✔️

📱 Paypal donation link (from bluesky) ✔️
Please open Telegram to view this post
VIEW IN TELEGRAM
12