🛍 big delivery! 🛍

🔜 Some days ago we got a very good deal from a Chinese brand to order material. An additional 15% off our usual price! We decided to order the material right away for maximum discount. Two days later, the big delivery of material arrived.🆒

ℹ️ However, we have to replace some printers in the next few weeks. They are worn out and cannot be maintained further. The replacement of parts will cost us more than just buying a new one. This could lead to some more expenses than usual. Therefore, the goal for next month will be raised in the next couple of days.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🔜Production Timelapse 🔜

☄️ This is 24 hours of production condensed into just 11 seconds.

✏️ Due to the unpredictable Ukrainian grid, our Ukrainian counterparts are unable to manufacture these parts in time. The daily production capacity was limited to a maximum of two units. Consequently, we made the decision to assist with our printers to provide a significant boost to their factory.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 Supplies ARRIVED! 👀

🔔 We would like to inform you that all of our supplies have been arrived. You paid for the sweets and for the printed parts also. (Check our posting from some days ago » link)

🙏 For all donors who donated the money and actually paid for the supplies. The more we get, the more we can print. Thank you for your support!
🔝🔝🔝🔝

ℹ️ We modified the voice and camouflaged our newly developed bottle so that we could maintain the safety of the soldiers and the advantage on the battlefield.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💥Supplies for the military!🇺🇦

Another confirmation that your money went directly to the military in form of printed parts.


✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⚡️ Flat-out production: ⚡️
Thanks to your money spending efforts, we are able to push our production to its limits. Material will last until end of February and all printers are on their maximum load.

🫵Your money has an impact:
Watch our confirmation video (check this link). This help reaches Ukraine soldiers without any organisation between. All the money goes straight into the production process which then helps the soldiers at the frontline to survive.

👀 Current situation:
It’s not good. But without your efforts, it would be way worse! Due to constant attacks on the energy infrastructure, the production within Ukraine remains extremely difficult. That is why we should increase our production.

❓ How can you help?
If you want to help, but don't have spare money available, then try to convince other people of doing a donation for you. War is extremely expensive. However, remaining a free world is priceless. We all have to help Ukraine to defend their and our freedom!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⚠️Important information!⚠️

Some of you have noticed, that we are currently not sharing any videos of hunting the enemy with drone drops. It raised concerns that we are not working anymore. That is not true and we can tell you why.

1️⃣🔜 what has changed?
hunting the invaders with drone drops was fun. It is like a video game and you probably know the game in which you have to explode pigs. That’s fun isn’t it?
However, time moves on and the drones used for this can now be intercepted. It’s most likely a one way ticket for the drones which makes it very expensive for the units even the ammunition is very cheap. Two years ago, it was a very effective way of stopping the illegal immigrants, the robbers, the abusers and the murders while there were only a few attempts to intercept the drones. This has changed now.

2️⃣🔜the situation
war is costly and not only be payed by money. War gets payed also by human life’s. That’s why there are less drone pilots available. 2 years ago, there were drone teams every 2 km at the front line. And now we are happy to have one team every 10 km. The more drones take off from the positions, the more likely they were discovered. It doesn’t take long for areal bombs to be deployed which is the biggest thread to Ukrainian positions.

3️⃣🔜new technologies
Ukrainians are working in small groups. They develop new technologies and new devices fast which are suitable for their individual needs. However, they can’t scale it. They are dependent on outside help so that they can produce the new developments in sufficient quantities.
The enemy on the other side are not able to develop new technologies in an effective way. They only search channels like ours for new devices and try to copy them. We therefore do not want to give them a detailed inside view of how everything works even it is very interesting for you.
Once they found out how something works, they copy it and scale it.

4️⃣🔜energy situation
Due to the ongoing attacks on the energy infrastructure, it is extremely difficult to produce the components needed for new developments. Six months ago, the factory in Ukraine still had electricity for 8 hours a day. For some time now, there has only been electricity for 2 hours a day. As a result, the factory is currently operating with many generators. However, this also causes problems because the 3D printers are very sensitive to energy fluctuations.

5️⃣🔜Outsourcing the production
The only way to keep up the supply for the military is outsourcing the production to European countries. That is why there are 3D printing factories in Poland and Germany. We were asked if we could print 150 parts per day. Each component requires 2 hours of printing time. This means that each printer can print 12 parts per day. To print 150 parts, a total of approximately 12 printers are required. The material usage is then 12kg per day only for this single part.

⚠️ WE NEED YOU! ⚠️
To manage this, we would need at least 150€/day to cover the needs. Which equals 4500€ per month. Everything is transparent and everybody can check the income through our PayPal donation page.

Question: are we powerful enough to cover it completely?

✏️ If you have any questions, please leave a comment below.

👍 Be a part of this project and help us to successful help Ukraine in defending their country!
Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⁉️What is that?⁉️

ℹ️This is an inside view of our 3d printing factory. Every month, or better to say: every 600h of printing, we have to replace the surface we are printing on. The printers are running close to 20h/day and 30days a month.

ℹ️This replacement is part of the normal monthly maintenance of the printers. The buildplate you see here has already seen over 2000 parts for our newly developed bottles.

ℹ️ just for your information: a new printer has been arrived which is replacing a totally worn out printer. With over 9000 printing hours we retire the printer. The replacement parts and the time of repairing the printer would cost more than a new printer. That’s why we have decided to buy a new one as a replacement.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🤫The daily business…🤫

This is how it looks like since 2 years now. Printing, packing, restocking and repeat. Unofficially we have started our project in February 2024 with a very small amount of printed parts. But since then, we have used over 2000 kg of material shipped over to Ukraine through many volunteers.

🙏 A big thank you to all of our supporters. The small ones as well as the big ones. Without you as the back-bone of this project, Ukraine would not be able to withstand that constant high pressure. 🙏

✏️ If you have any questions, please leave a comment below.

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 Products assembly 👀

ℹ️ Can you see our products? This is how the preparation looks like. In a well hidden basement and packed in boxes. It is only an intermediate stage, because from there the products continue on to final assembly.

ℹ️ Approximately 150 such products are manufactured every day. It highly depends on the supply of parts for the assembly. The more parts they get, the more final products will be produced. And this is where your support is kicking in. Every single donor is needed to keep the production steady as it is.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🫡Germans are supporting Ukraine! 🇺🇦

👉The above is from an article of the German magazine "Der Spiegel“
- (Original source)
- (full article in german)

This person who gave the interview is not part of our team and is not related to us in any way. He is from the organisation called DrukArmy. The article it shows how many Germans are willing to help Ukraine. There are hundreds of small factories across Germany who all are printing for Ukraine.

❓ What is the difference between DrukArmy and us?

DrukArmy are individual volunteers - you need your own printer and you pay for your own material. You also have to organise your own logistics and send the parts to a logistics hub. Usually you need one spool of filament every other day. This equals about 50€/week only for material which is 200€/month.

And here is the difference: By donating money to us, we are doing everything for you. You don’t need a printer to support Ukraine. You don’t need to organise material and the logistics. We do everything. You can simply make a plan or do monthly donations. We on the other hand will buy material, do the logistics and print the needed parts for Ukraine.

❓Why are we printing in Germany and not directly in Ukraine?

Russia is actively destroying Ukraine’s energy sources, infrastructure, and power lines. Power shortages and outages have been steadily escalating. While this situation receives limited media attention, our factory within Ukraine has provided a direct warning that production increases may be impossible or even decreasing due to the power cuts. Consequently, we, with our stable grid, must increase production to cover their needs.

👍 Your actions matters!

Without you, the supporters, the donors, the advertisers and the vocals who spread the word, without you, we cannot succeed!

🙏 THANK YOU ALL!

Special thanks to all the supporters from Germany, UK, Australia, France, Belgian, Switzerland, Finland, Poland, Spain, Austria, Sweden, Norway, USA, Canada, even Iranian protesters are donating! And thank you to all the other donors from the other countries as well!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⚡️The daily business

🔴 The production runs every day. There is not a single day when the printers are not running. Even when you should actually be in bed because you are sick, the printers are still being operated!

ℹ️ Ukraine needs supplies. Lots of supplies. More than we can currently produce. This box contains 500 individual items that will be used for 500 spezial gifts. The problem is that each gift requires a total of 5 ingredients. And they need 100 gifts per day. Our factory is able to produce 2 ingredients for this special gift. All the other necessary parts are coming from other sources like DrukArmy or similar.

✏️ stay tuned for more information on this channel. Hit subscribe and check out comment section down below.

👍 Be a part of this project! Donate through our PayPal page here:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦