💥 Our products in use 💥

▶️ We invite you to watch our spectacular video. Our bottles are not only good looking, they are also highly effective!

🔜 However, the production is shifting very frequently. Small bottles 6 months ago, big bottles 3 months ago. Large bombs 4 weeks ago. Special equipment today and now it has shifted a little to even bigger ones with a greater 💥.
This has increased the radius of effectiveness. However, this has also increased the the weight and material usage for production. Unfortunately, we can’t give you exact details of what we produce at the moment. That’s OPSEC (Operational Security).

ℹ️Some statistics for the current production:

They currently use about 100-120 self-developed bottles per day. Success rate of stopping a single invader is about 25%. The larger bottle costs about 5€. This means: with only 20€ you can stop at least 1 invader! Your money can be directly converted into man stopping action!
If we compare it to artillery shells, it costs a fraction of those!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you want to be a part of this, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

❓ Here is your confirmation ❗️

✔️ Once you've watched the video, no further words are needed to prove that we really do what we say we do. This is one of our small, hidden production facilities in Ukraine, where urgently needed parts are manufactured.

⚡️ Due to power outages, they’re running the production lines with small diesel generators. That’s why they can only make urgent parts. Anything that takes a long time to print can’t be manufactured.

🔴 To achieve our full potential, we require approximately €4,000 per month. This financial commitment is only feasible with a robust community that is continuously expanding.

🙏 We express our sincere gratitude for your invaluable contributions. Your efforts are truly commendable. 🙏

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you want to be a part of this, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 You paid for it! 👀

📌 Last week we asked if you want to send some sweets to Ukraine. A moral boost for the hard working defenders. And now we are filling up our boxes with some tasty yummy chocolate bars.

🍫 Which one would you pick?

🤫 Have you noticed the tiny printed parts? Well… that’s a secret development. So …psssst…. Don’t tell 😉

😂 Just joking. It is a call from our brigade. They do not have enough capacity to print them on their own so we were asked to print for them. All we know is that these parts are needed for something that makes 💥

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💥 Big boom from above 💥

👍 Take your time, watch the video. It’s speaking by itself. This is what they deserve by entering the country illegally! 🖕

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 This is number 3! 👀

🆒 Who says no to Mentos?

You voted for, we deliver!
(By the way, the whole space at the side of the box is filled up with Mentos. It’s 2kg in it! The total weight including the parts is about 14kg)

Mentos - The Freshmaker!

What’s also in this box? Spare parts! Without spare parts no 💥 😉

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🔥A new request🔥

🔴 Our Ukrainian friends reached out to us with a new request. Unfortunately, due to the energy shortages they’re facing, they can’t produce these complex parts right now. They’re crucial for their efforts to halt the invaders’ advance.

🔜 We can’t give you the exact details (OPSEC), but let me tell you, these are essential components. Each part takes about 2 hours to print. So, if you have 16 parts printed on one printer, it’ll take a total of 36 hours, or 1.5 days. They’re currently consuming around 80 parts a day. We’re doing our best to produce the same amount as they need.

⚠️ To facilitate this, we require continuous donations to operate the printers 24 hours a day. All donated funds will be utilised to cover operational expenses, shipping costs, and material usage.

✏️ If you have any questions, please leave a comment below. Or check out who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🛍 big delivery! 🛍

🔜 Some days ago we got a very good deal from a Chinese brand to order material. An additional 15% off our usual price! We decided to order the material right away for maximum discount. Two days later, the big delivery of material arrived.🆒

ℹ️ However, we have to replace some printers in the next few weeks. They are worn out and cannot be maintained further. The replacement of parts will cost us more than just buying a new one. This could lead to some more expenses than usual. Therefore, the goal for next month will be raised in the next couple of days.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🔜Production Timelapse 🔜

☄️ This is 24 hours of production condensed into just 11 seconds.

✏️ Due to the unpredictable Ukrainian grid, our Ukrainian counterparts are unable to manufacture these parts in time. The daily production capacity was limited to a maximum of two units. Consequently, we made the decision to assist with our printers to provide a significant boost to their factory.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 Supplies ARRIVED! 👀

🔔 We would like to inform you that all of our supplies have been arrived. You paid for the sweets and for the printed parts also. (Check our posting from some days ago » link)

🙏 For all donors who donated the money and actually paid for the supplies. The more we get, the more we can print. Thank you for your support!
🔝🔝🔝🔝

ℹ️ We modified the voice and camouflaged our newly developed bottle so that we could maintain the safety of the soldiers and the advantage on the battlefield.

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💥Supplies for the military!🇺🇦

Another confirmation that your money went directly to the military in form of printed parts.


✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

⚡️ Flat-out production: ⚡️
Thanks to your money spending efforts, we are able to push our production to its limits. Material will last until end of February and all printers are on their maximum load.

🫵Your money has an impact:
Watch our confirmation video (check this link). This help reaches Ukraine soldiers without any organisation between. All the money goes straight into the production process which then helps the soldiers at the frontline to survive.

👀 Current situation:
It’s not good. But without your efforts, it would be way worse! Due to constant attacks on the energy infrastructure, the production within Ukraine remains extremely difficult. That is why we should increase our production.

❓ How can you help?
If you want to help, but don't have spare money available, then try to convince other people of doing a donation for you. War is extremely expensive. However, remaining a free world is priceless. We all have to help Ukraine to defend their and our freedom!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦