#mcqs_electrical_cables (Page -1),
Scroll Down ⤵️⤵️⤵️⤵️
Scroll Down ⤵️⤵️⤵️⤵️
Pressure cables are generally not used beyond
Anonymous Quiz
19%
A. 11 kV
30%
B. 33 kV
26%
C. 66 kV
26%
D. 132 kV
Solid type cables are considered unreliable beyond 66 kV because
A. Insulation may melt due to higher temperature
B. Skin effect dominates on the conductor
C. Of corona loss between conductor and sheath material
D. There is a danger of breakdown of insulation due to the presence of voids
Answer: Option D
@power_system_engineering
A. Insulation may melt due to higher temperature
B. Skin effect dominates on the conductor
C. Of corona loss between conductor and sheath material
D. There is a danger of breakdown of insulation due to the presence of voids
Answer: Option D
@power_system_engineering
The insulation of the cable decreases with
A. The increase in length of the insulation
B. The decrease in the length of the insulation
C. Either (A) or (B)
D. None of the above
Answer: Option A
@power_system_engineering
—————————————
⚡️Support & Contact Us ⚡️Donate (₹)
A. The increase in length of the insulation
B. The decrease in the length of the insulation
C. Either (A) or (B)
D. None of the above
Answer: Option A
@power_system_engineering
—————————————
⚡️Support & Contact Us ⚡️Donate (₹)
The thickness of the layer of insulation on the conductor, in cables, depends upon
Anonymous Quiz
0%
A. Reactive power
0%
B. Power factor
73%
C. Voltage
27%
D. Current carrying capacity
The thickness of the layer of insulation on the conductor, in cables, depends upon
A. Reactive power
B. Power factor
C. Voltage
D. Current carrying capacity
Answer: Option C
@power_system_engineering
A. Reactive power
B. Power factor
C. Voltage
D. Current carrying capacity
Answer: Option C
@power_system_engineering
The material for armouring on cable is usually
Anonymous Quiz
0%
A. Steel tape
38%
B. Galvanized steel wire
63%
C. Any of the above
0%
D. None of the above
Q) MCQs
In the cables, sheaths are used to
A. Prevent the moisture from entering the cable
B. Provide enough strength
C. Provide proper insulation
D. None of the above
Answer: Option A
—————————————————-
Q) MCQs
In a cable immediately above metallic sheath ________ is provided.
A. Earthing connection
B. Bedding
C. Armouring
D. None of the above
Answer: Option B
@power_system_engineering
In the cables, sheaths are used to
A. Prevent the moisture from entering the cable
B. Provide enough strength
C. Provide proper insulation
D. None of the above
Answer: Option A
—————————————————-
Q) MCQs
In a cable immediately above metallic sheath ________ is provided.
A. Earthing connection
B. Bedding
C. Armouring
D. None of the above
Answer: Option B
@power_system_engineering
In capacitance grading of cables we use a _________ dielectric.
Anonymous Quiz
86%
A. Composite
0%
B. Porous
14%
C. Homogeneous
0%
D. Hygroscopic
Dielectric strength of rubber is around
A. 5 kV/mm
B. 15 kV/mm
C. 30 kV/mm
D. 200 kV/mm
Answer: Option C
—————————————————————-
The bedding on a cable consists of
A. Hessian cloth
B. Jute
C. Any of the above
D. None of the above
Answer: Option C
@power_system_engineering
A. 5 kV/mm
B. 15 kV/mm
C. 30 kV/mm
D. 200 kV/mm
Answer: Option C
—————————————————————-
The bedding on a cable consists of
A. Hessian cloth
B. Jute
C. Any of the above
D. None of the above
Answer: Option C
@power_system_engineering
The insulating material for a cable should have
Anonymous Quiz
0%
A. Low cost
0%
B. High dielectric strength
17%
C. High mechanical strength
83%
D. All of the above