⏩ Primary or sustained stresses, which account for 55% of the standard allowable stress following ASME standards.

⏩Displacement stresses, which should be kept between 80% to 90% of allowed ASME requirements and can be reduced by adding flexibility to the piping system

⏩Occasional stresses, originated by one-time events (typically related to seismic movements, extreme wind events or relief-thrust loads). ASME codes allow for certain increases in the event of these stresses, including allowing a 15% increase if the event lasts less than 8 hours and less than 800 hours per year (wind-related) and a 20% increase if the event lasts less than 1 hour and less than 80 hours per year (seismic movements and relief thrust).

A pneumatic conveying system is a method of transporting materials, typically bulk solids like powders and granules, through a network of pipes using compressed air or another gas. These systems offer a versatile and efficient way to move materials over both short and long distances, finding applications in various industries.

⬇️ There are 3 types of pneumatic conveyors

# Dense phase pneumatic conveyor
⏩ In dense phase conveying, the material is conveyed in a more concentrated, slower-moving plug or slug within the pipeline. This method is suitable for lighter or more fragile materials, and it reduces the risk of material degradation when tablets or other small parts are transferred which are prone to chipping in the transferring process. Dense phase conveying is often used for short distances. It is important when gentle handling of the material is needed.

#Medium phase pneumatic conveyor
⏩Medium phase conveying falls between lean phase and dense phase conveying in terms of material concentration. The velocity is higher than that of dense phase conveying but lower than dilute phase conveying. Medium-phase conveying is a balance between dilute and dense phase. It provides a flexible solution for materials that fall in between these two types.

#Dilute (lean) phase pneumatic conveyor
⏩ In dilute phase conveying, the material is transported in suspension within a stream of air or gas. The terms "dilute phase" and “lean phase” are thereby often used interchangeably. The material is usually moved at high speeds. The amount of material in the air is low inside the conveying line. Dilute phase or lean phase conveying is suitable for heavier materials and is often used for longer-distance transport.

❤️ آری به اتفاق جهان می‌توان گرفت

🌺 به همت و نیکی شما خوبان از امروز 24 مهر، 6مین طرح مهر قلم را برای سیستان و بلوچستان آغاز می کنیم

❤️سمینار گلریزان
✅اصول طراحی پایپینگ با نرم افزار PDMS با تدریس مهندس رحمانپور برای دریافت فایل های آموزشی به ID:@Roham1234567890 پیام بدهید.
💢هزینه آموزش ۳۵۰ هزارتومان
❤️برای سیستان بلوچستان
🌷هدف مهربانی : 800 میلیون تومان برای 400 دانش آموز وطن

⚡️حضور برای توزیع قاصدک های مهربانی : هفته اول آبان 1404

❤️نحوه واریز:
✅شماره کارت بانک توسعه تعاون
5029081031797406

بنام ابراهیم خیِّر
شماره شبا

IR190220142302013719535001

پس از واریز مهربانی به آیدی زیر پیام ارسال فرمایید
@Roham1234567890
مهندس رحمانپور

✅پکیچ آموزشی بصورت آفلاین میباشد ولی پشتیبانی انلاین بصورت کامل دارد.



https://t.me/joinchat/AAAAAFXXehmMZsI0YNDwfQ

Dear All,

As 2025 draws to a close, I would like to extend my warmest wishes to all group member. May this festive season bring joy and peace, and may the New Year be filled with success and exciting opportunities.
I wish everyone a prosperous 2026. We look forward to achieving great things together.

Warm Regards,
Akbar Daneshvar
PSA Group

PSA High Pressure Pipe Support