Pipe Stress Analysis
PSA Piping performs Pipe Stress Analysis based on ASME codes (American Boiler and Pressure vessel). ASME codes cover the design, analysis, manufacturing and inspection of pressure vessels, piping and supporting structures. It represents a complete set of rules for the analysis of the mechanical components too.
PSA Piping performs Pipe Stress Analysis based on ASME codes (American Boiler and Pressure vessel). ASME codes cover the design, analysis, manufacturing and inspection of pressure vessels, piping and supporting structures. It represents a complete set of rules for the analysis of the mechanical components too.
PSA perform pipe stress analysis for the various load conditions such as:
1.Normal Operating
2.ConditionsUpset
3.ConditionsEmergency
4.ConditionsFaulted Conditions
1.Normal Operating
2.ConditionsUpset
3.ConditionsEmergency
4.ConditionsFaulted Conditions
We follow ASME B31 standard in the piping design and engineering for power and process plants and industrial and commercial facilities under very different loading conditions like as weight, thermal, seismic and other dynamic loads. PSA Piping uses ASME section III codes and NRC regulations in piping design of power plants.
We perform static analysis for the following loading conditions:
Pressure:
Operating pressure or upset condition pressures.
Operating pressure or upset condition pressures.
Deadweight:
This loading condition consists of the weight of pipe, medium, insulation and any attachment to the pipelines.
This loading condition consists of the weight of pipe, medium, insulation and any attachment to the pipelines.
Wind Loads:
This loading condition is a dynamic condition but normally analysed as equivalent static condition.
This loading condition is a dynamic condition but normally analysed as equivalent static condition.
Thermal Loads:
This loading condition is induced by different thermal transients.
This loading condition is induced by different thermal transients.
Thermal Stratification:
This loading condition occurs in the connecting pipes in a horizontal plane between two reservoirs with fluid at different temperatures with small flow rates. This initiates an extra bending stress and creates local stresses in the pipe cross section due to a nonlinear circumferential metal temperature distribution. Pressurizers’ surge lines are one of the places where thermal stratification occurs.
This loading condition occurs in the connecting pipes in a horizontal plane between two reservoirs with fluid at different temperatures with small flow rates. This initiates an extra bending stress and creates local stresses in the pipe cross section due to a nonlinear circumferential metal temperature distribution. Pressurizers’ surge lines are one of the places where thermal stratification occurs.
Equipment Movements:
This loading condition causes the movement of pipes due to thermal movement of the equipment or pressure vessels and the movement of the pipe supports due to seismic loads.
This loading condition causes the movement of pipes due to thermal movement of the equipment or pressure vessels and the movement of the pipe supports due to seismic loads.
⬇️ Dynamic analyses are performed for the following occasional loading conditions: