Stelliberty 2.0.1
● Beta releases can now be detected when the update channel is set to Beta.
● Subscription and override updates now report individual results and batch success or failure counts.
----------------------
● 更新通道设为测试版后，现在可以检测测试版发布。
● 订阅和覆写更新现在会反馈单项结果，以及批量更新的成功和失败数量。
via Release notes from stelliberty (author: github-actions[bot])
● Beta releases can now be detected when the update channel is set to Beta.
● Subscription and override updates now report individual results and batch success or failure counts.
----------------------
● 更新通道设为测试版后，现在可以检测测试版发布。
● 订阅和覆写更新现在会反馈单项结果，以及批量更新的成功和失败数量。
via Release notes from stelliberty (author: github-actions[bot])
👍2
Stelliberty 2.0.2
● Proxy Provider nodes remain visible, selectable, and available for delay testing with the latest mihomo core.
● Individual and batch delay tests can run together without losing completed results.
● Long proxy node tooltips now wrap within a limited height.
----------------------
● 使用最新版 mihomo 核心时，Proxy Provider 节点仍可正常显示、选择并进行延迟测试。
● 单节点与批量延迟测试现在可以同时运行，已完成的结果不会丢失。
● 较长的代理节点提示文字现在会在限定高度内换行显示。
via Release notes from stelliberty (author: github-actions[bot])
● Proxy Provider nodes remain visible, selectable, and available for delay testing with the latest mihomo core.
● Individual and batch delay tests can run together without losing completed results.
● Long proxy node tooltips now wrap within a limited height.
----------------------
● 使用最新版 mihomo 核心时，Proxy Provider 节点仍可正常显示、选择并进行延迟测试。
● 单节点与批量延迟测试现在可以同时运行，已完成的结果不会丢失。
● 较长的代理节点提示文字现在会在限定高度内换行显示。
via Release notes from stelliberty (author: github-actions[bot])
❤2
Stelliberty 2.0.3-beta1
Changes
● ci(beta): fix metadata output and dependency schedule
● fix(ci): prevent macOS x64 simulation startup timeout
via Release notes from stelliberty (author: github-actions[bot])
Changes
● ci(beta): fix metadata output and dependency schedule
22bca50● fix(ci): prevent macOS x64 simulation startup timeout
6190563via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.3
● Service mode remains available after installing an app update.
----------------------
● 安装应用更新后，服务模式仍可正常使用。
via Release notes from stelliberty (author: github-actions[bot])
● Service mode remains available after installing an app update.
----------------------
● 安装应用更新后，服务模式仍可正常使用。
via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.4-beta1
Changes
● fix(startup): correct Windows autostart behavior
● fix(settings): prevent autostart toggle flicker
● fix(proxy): persist sorting and improve group scrolling
● ui(proxy): smooth horizontal group scrolling
via Release notes from stelliberty (author: github-actions[bot])
Changes
● fix(startup): correct Windows autostart behavior
1b4d256● fix(settings): prevent autostart toggle flicker
819995c● fix(proxy): persist sorting and improve group scrolling
f538143● ui(proxy): smooth horizontal group scrolling
38c91a8via Release notes from stelliberty (author: github-actions[bot])
👍1
Stelliberty 2.0.4-beta2
Changes
● fix(runtime): preserve portable data and subscriptions
via Release notes from stelliberty (author: github-actions[bot])
Changes
● fix(runtime): preserve portable data and subscriptions
2a30873via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.4-beta3
Changes
● fix(installer): clarify portable data verification
● ci(installer): merge persistence simulation into platform tests
● ci(installer): verify replacement with built payloads
via Release notes from stelliberty (author: github-actions[bot])
Changes
● fix(installer): clarify portable data verification
3b5298f● ci(installer): merge persistence simulation into platform tests
dae3785● ci(installer): verify replacement with built payloads
bce5642via Release notes from stelliberty (author: github-actions[bot])
❤1
Stelliberty 2.0.4
● Windows startup settings now wait for permission-sensitive changes to succeed, avoid unrelated task prompts, and start after a one-second delay.
● Proxy sorting now persists across app and core restarts, while horizontal group navigation supports smooth wheel and button scrolling.
● Replacing the macOS or Linux application now preserves portable user data outside the replaceable application payload.
● macOS now reports the correct application name and follows simplified Chinese system localization more reliably.
● Subscription imports no longer fail when the stored subscription list is missing or incomplete.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● Windows 开机启动设置现在会等待权限相关操作成功后再更新状态，不再触发无关的任务弹窗，并在 1 秒延时后启动。
● 代理排序现在能够在应用和内核重启后保持，横向分组导航同时支持平滑的滚轮与按钮滚动。
● 替换 macOS 或 Linux 应用时，便携用户数据现在会保存在可替换应用文件之外，不再随应用一起被覆盖。
● macOS 现在能够显示正确的应用名称，并能更可靠地跟随简体中文系统语言。
● 订阅列表缺失或内容不完整时，导入订阅不再失败。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
● Windows startup settings now wait for permission-sensitive changes to succeed, avoid unrelated task prompts, and start after a one-second delay.
● Proxy sorting now persists across app and core restarts, while horizontal group navigation supports smooth wheel and button scrolling.
● Replacing the macOS or Linux application now preserves portable user data outside the replaceable application payload.
● macOS now reports the correct application name and follows simplified Chinese system localization more reliably.
● Subscription imports no longer fail when the stored subscription list is missing or incomplete.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● Windows 开机启动设置现在会等待权限相关操作成功后再更新状态，不再触发无关的任务弹窗，并在 1 秒延时后启动。
● 代理排序现在能够在应用和内核重启后保持，横向分组导航同时支持平滑的滚轮与按钮滚动。
● 替换 macOS 或 Linux 应用时，便携用户数据现在会保存在可替换应用文件之外，不再随应用一起被覆盖。
● macOS 现在能够显示正确的应用名称，并能更可靠地跟随简体中文系统语言。
● 订阅列表缺失或内容不完整时，导入订阅不再失败。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.5-beta1
Changes
● fix(layout): align wrap panel item boundaries
via Release notes from stelliberty (author: github-actions[bot])
Changes
● fix(layout): align wrap panel item boundaries
c268bf5via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.5
● Opening the main window after a silent startup is now faster because page preparation begins only after the window appears.
● Locating the selected proxy no longer repeatedly pulls the node list back after you scroll elsewhere.
● Wrapped grid items now stay aligned at fractional display scaling without clipping or overflowing the final column.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● 静默启动后打开主窗口的速度得到改善，页面准备会在窗口显示后再开始。
● 定位已选代理后，即使滚动到其他位置，节点列表也不会再被后续刷新反复拉回。
● 分数缩放下的网格项目现在能够保持对齐，最后一列不再被裁切或越出边界。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
● Opening the main window after a silent startup is now faster because page preparation begins only after the window appears.
● Locating the selected proxy no longer repeatedly pulls the node list back after you scroll elsewhere.
● Wrapped grid items now stay aligned at fractional display scaling without clipping or overflowing the final column.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● 静默启动后打开主窗口的速度得到改善，页面准备会在窗口显示后再开始。
● 定位已选代理后，即使滚动到其他位置，节点列表也不会再被后续刷新反复拉回。
● 分数缩放下的网格项目现在能够保持对齐，最后一列不再被裁切或越出边界。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
Stelliberty 2.0.6
● You can now register separate global shortcuts to show or hide the window, toggle the system proxy, and toggle virtual network adapter mode.
● Shortcut registration rejects unsupported or duplicate combinations, pauses activation while recording, and ignores repeated activations for 500 milliseconds.
● Pressing Escape now returns from a settings subpage.
● Windows upgrades now turn off the system proxy after stopping the app, preventing an unusable proxy from remaining enabled.
● Opening the main window after a silent startup is now faster because page preparation begins only after the window appears.
● Locating the selected proxy no longer repeatedly pulls the node list back after you scroll elsewhere.
● Wrapped grid items now stay aligned at fractional display scaling without clipping or overflowing the final column.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● 现在可以分别注册全局快捷键，用于显示或隐藏窗口、切换系统代理以及切换虚拟网卡模式。
● 快捷键注册会拒绝不支持或重复的组合，录制期间暂停触发，并忽略 500 毫秒内的重复操作。
● 现在可以在设置子页按 Escape 返回上一级。
● Windows 升级安装停止应用后会关闭系统代理，避免留下无法使用的代理开关。
● 静默启动后打开主窗口的速度得到改善，页面准备会在窗口显示后再开始。
● 定位已选代理后，即使滚动到其他位置，节点列表也不会再被后续刷新反复拉回。
● 分数缩放下的网格项目现在能够保持对齐，最后一列不再被裁切或越出边界。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
● You can now register separate global shortcuts to show or hide the window, toggle the system proxy, and toggle virtual network adapter mode.
● Shortcut registration rejects unsupported or duplicate combinations, pauses activation while recording, and ignores repeated activations for 500 milliseconds.
● Pressing Escape now returns from a settings subpage.
● Windows upgrades now turn off the system proxy after stopping the app, preventing an unusable proxy from remaining enabled.
● Opening the main window after a silent startup is now faster because page preparation begins only after the window appears.
● Locating the selected proxy no longer repeatedly pulls the node list back after you scroll elsewhere.
● Wrapped grid items now stay aligned at fractional display scaling without clipping or overflowing the final column.
Upgrading from versions before 2.0.0 [v2.0.0]
Version 2.0.0 was a major rewrite and does not retain compatibility with installation state from the old Flutter version. Before installing this release over an older version:
1. Disable and uninstall startup integration in the old version.
2. Uninstall service mode in the old version.
3. Exit and uninstall the old application completely.
4. Install the current version only after the previous steps are complete.
Skipping these steps may leave old startup or service components on the system and cause unexpected behavior.
----------------------
● 现在可以分别注册全局快捷键，用于显示或隐藏窗口、切换系统代理以及切换虚拟网卡模式。
● 快捷键注册会拒绝不支持或重复的组合，录制期间暂停触发，并忽略 500 毫秒内的重复操作。
● 现在可以在设置子页按 Escape 返回上一级。
● Windows 升级安装停止应用后会关闭系统代理，避免留下无法使用的代理开关。
● 静默启动后打开主窗口的速度得到改善，页面准备会在窗口显示后再开始。
● 定位已选代理后，即使滚动到其他位置，节点列表也不会再被后续刷新反复拉回。
● 分数缩放下的网格项目现在能够保持对齐，最后一列不再被裁切或越出边界。
从 2.0.0 之前的版本升级 [v2.0.0]
2.0.0 是一次大规模重构，不兼容旧 Flutter 版本留下的安装状态。从旧版本升级到当前版本前，请依次完成以下操作：
1. 在旧版本中关闭并卸载开机启动。
2. 在旧版本中卸载服务模式。
3. 完全退出并卸载旧应用。
4. 确认以上步骤完成后，再安装当前版本。
跳过这些步骤可能导致系统中残留旧版开机启动项或服务组件，进而引发异常行为。
via Release notes from stelliberty (author: github-actions[bot])
👍2❤1
Stelliberty 2.0.7
● Added bouncier page, settings subpage, and dialog transitions, with smoother enter and exit motion during rapid navigation.
● Page and dialog transitions now avoid stale hover states, visual overlap, and unfinished closing animations.
● Pages are warmed up after the window opens, making the first visit to each section feel more responsive.
● Hiding the app in the system tray now releases page content after 30 seconds to reduce memory use, while restoring the current page and scroll positions when reopened.
● Settings subpages are now created only when needed and remember their individual scroll positions.
● Large proxy node lists now render items on demand in a virtualized grid, improving first-open speed and scrolling smoothness.
● The proxy page now rebuilds correctly after language changes or node selections that finish while the page is hidden.
● Proxy delay tests now use a pulsing ellipsis indicator and keep results synchronized with nodes rendered later.
● Connection and core log pause controls now switch between pause and resume icons with matching tooltips.
● Scrollbar thumbs now keep fully rounded ends.
● Installing or updating service mode now switches the current session to the service core immediately, while uninstalling returns to the normal core without restarting the app.
● Service mode changes now recover the normal core after failed or canceled transitions and prevent normal and service cores from competing for the same runtime channel.
● Service mode notices now distinguish installation, uninstallation, cancellation, session activation failure, and normal-mode recovery failure.
● A failed proxy selection, proxy list, or rule refresh during startup no longer prevents the remaining runtime lists from loading.
----------------------
● 新增更加 Q 弹的页面、设置子页与对话框切换动画，快速切换时的进入和退出动效也更加顺滑。
● 页面与对话框切换现在会避免残留悬停状态、画面重叠以及关闭动画未完成的问题。
● 窗口打开后会在后台预热各个页面，首次进入不同功能区时响应更加流畅。
● 应用隐藏到系统托盘 30 秒后会释放页面内容以降低内存占用，再次打开时会恢复当前页面和滚动位置。
● 设置子页现在只在需要时创建，并会分别记住各自的滚动位置。
● 大型代理节点列表现在会通过虚拟化网格按需渲染，首次打开速度和滚动流畅度得到改善。
● 切换语言或节点选择在代理页隐藏期间完成后，再次进入代理页时也能正确重建显示状态。
● 代理延迟测试现在使用呼吸变化的省略号提示，并会让稍后渲染的节点保持正确的测试结果。
● 连接与核心日志页面的暂停控件现在会在暂停和继续图标之间切换，并同步更新提示文字。
● 滚动条滑块现在会始终保持完整的圆角端点。
● 安装或更新服务模式后，当前会话会立即切换到服务核心；卸载后也会直接恢复普通核心，无需重启应用。
● 服务模式切换失败或取消后现在会恢复普通核心，并避免普通核心与服务核心争用同一个运行通道。
● 服务模式提示现在会分别说明安装、卸载、取消、当前会话激活失败以及普通模式恢复失败。
● 启动时恢复代理选择、刷新代理列表或刷新规则中的某一步失败，不再阻止其余运行列表继续加载。
via Release notes from stelliberty (author: github-actions[bot])
● Added bouncier page, settings subpage, and dialog transitions, with smoother enter and exit motion during rapid navigation.
● Page and dialog transitions now avoid stale hover states, visual overlap, and unfinished closing animations.
● Pages are warmed up after the window opens, making the first visit to each section feel more responsive.
● Hiding the app in the system tray now releases page content after 30 seconds to reduce memory use, while restoring the current page and scroll positions when reopened.
● Settings subpages are now created only when needed and remember their individual scroll positions.
● Large proxy node lists now render items on demand in a virtualized grid, improving first-open speed and scrolling smoothness.
● The proxy page now rebuilds correctly after language changes or node selections that finish while the page is hidden.
● Proxy delay tests now use a pulsing ellipsis indicator and keep results synchronized with nodes rendered later.
● Connection and core log pause controls now switch between pause and resume icons with matching tooltips.
● Scrollbar thumbs now keep fully rounded ends.
● Installing or updating service mode now switches the current session to the service core immediately, while uninstalling returns to the normal core without restarting the app.
● Service mode changes now recover the normal core after failed or canceled transitions and prevent normal and service cores from competing for the same runtime channel.
● Service mode notices now distinguish installation, uninstallation, cancellation, session activation failure, and normal-mode recovery failure.
● A failed proxy selection, proxy list, or rule refresh during startup no longer prevents the remaining runtime lists from loading.
----------------------
● 新增更加 Q 弹的页面、设置子页与对话框切换动画，快速切换时的进入和退出动效也更加顺滑。
● 页面与对话框切换现在会避免残留悬停状态、画面重叠以及关闭动画未完成的问题。
● 窗口打开后会在后台预热各个页面，首次进入不同功能区时响应更加流畅。
● 应用隐藏到系统托盘 30 秒后会释放页面内容以降低内存占用，再次打开时会恢复当前页面和滚动位置。
● 设置子页现在只在需要时创建，并会分别记住各自的滚动位置。
● 大型代理节点列表现在会通过虚拟化网格按需渲染，首次打开速度和滚动流畅度得到改善。
● 切换语言或节点选择在代理页隐藏期间完成后，再次进入代理页时也能正确重建显示状态。
● 代理延迟测试现在使用呼吸变化的省略号提示，并会让稍后渲染的节点保持正确的测试结果。
● 连接与核心日志页面的暂停控件现在会在暂停和继续图标之间切换，并同步更新提示文字。
● 滚动条滑块现在会始终保持完整的圆角端点。
● 安装或更新服务模式后，当前会话会立即切换到服务核心；卸载后也会直接恢复普通核心，无需重启应用。
● 服务模式切换失败或取消后现在会恢复普通核心，并避免普通核心与服务核心争用同一个运行通道。
● 服务模式提示现在会分别说明安装、卸载、取消、当前会话激活失败以及普通模式恢复失败。
● 启动时恢复代理选择、刷新代理列表或刷新规则中的某一步失败，不再阻止其余运行列表继续加载。
via Release notes from stelliberty (author: github-actions[bot])
❤2
Stelliberty 2.0.8-beta1
Changes
● feat(settings): add title bar FPS toggle
● ci(release): align beta build baselines
via Release notes from stelliberty (author: github-actions[bot])
Changes
● feat(settings): add title bar FPS toggle
6adde82● ci(release): align beta build baselines
74b35b5via Release notes from stelliberty (author: github-actions[bot])
❤1
beta-base/v2.0.8: fix(ci): skip beta build for stable version bumps
● Detect AppVersion changes only in the current push before resolving beta release baselines
via Release notes from stelliberty (author: Kindness-Kismet)
● Detect AppVersion changes only in the current push before resolving beta release baselines
via Release notes from stelliberty (author: Kindness-Kismet)
Stelliberty 2.0.8
● Added an application behavior option to show or hide the live frame rate in the title bar, enabled by default.
----------------------
● 新增在标题栏显示或隐藏实时帧率的应用行为选项，并默认开启。
via Release notes from stelliberty (author: github-actions[bot])
● Added an application behavior option to show or hide the live frame rate in the title bar, enabled by default.
----------------------
● 新增在标题栏显示或隐藏实时帧率的应用行为选项，并默认开启。
via Release notes from stelliberty (author: github-actions[bot])
beta-base/v2.0.9: chore: update summary from v2.0.8 to v2.0.9
● Restore the circular delay test indicator across both proxy layouts
● Add dedicated automation identifiers for delay text and loading states
via Release notes from stelliberty (author: Kindness-Kismet)
● Restore the circular delay test indicator across both proxy layouts
● Add dedicated automation identifiers for delay text and loading states
via Release notes from stelliberty (author: Kindness-Kismet)
Stelliberty 2.0.9
● Proxy delay tests once again show a rotating circular indicator instead of an ellipsis.
----------------------
● 代理延迟测试重新显示旋转圆环，不再使用省略号。
via Release notes from stelliberty (author: github-actions[bot])
● Proxy delay tests once again show a rotating circular indicator instead of an ellipsis.
----------------------
● 代理延迟测试重新显示旋转圆环，不再使用省略号。
via Release notes from stelliberty (author: github-actions[bot])
❤1