2022-06-23
630. Course Schedule III

Topic: Array, Greedy, Heap (Priority Queue)
Difficulty: Hard

Problem:
There are n different online courses numbered from 1 to n. You are given an array courses where courses[i] = [duration_i, lastDay_i] indicate that the i^th course should be taken continuously for duration_i days and must be finished before or on lastDay_i.

You will start on the 1^st day and you cannot take two or more courses simultaneously.

Return the maximum number of courses that you can take.

Example 1:

Input: courses = [[100,200],[200,1300],[1000,1250],[2000,3200]]
Output: 3
Explanation: 
There are totally 4 courses, but you can take 3 courses at most:
First, take the 1^st course, it costs 100 days so you will finish it on the 100^th day, and ready to take the next course on the 101^st day.
Second, take the 3^rd course, it costs 1000 days so you will finish it on the 1100^th day, and ready to take the next course on the 1101^st day. 
Third, take the 2^nd course, it costs 200 days so you will finish it on the 1300^th day. 
The 4^th course cannot be taken now, since you will finish it on the 3300^th day, which exceeds the closed date.

Example 2:

Input: courses = [[1,2]]
Output: 1

Example 3:

Input: courses = [[3,2],[4,3]]
Output: 0

Constraints:

• 1 <= courses.length <= 10^4
• 1 <= duration_i, lastDay_i <= 10^4

2022-06-24
1354. Construct Target Array With Multiple Sums

Topic: Array, Heap (Priority Queue)
Difficulty: Hard

Problem:
You are given an array target of n integers. From a starting array arr consisting of n 1's, you may perform the following procedure :

• let x be the sum of all elements currently in your array.
• choose index i, such that 0 <= i < n and set the value of arr at index i to x.
• You may repeat this procedure as many times as needed.

Return true if it is possible to construct the target array from arr, otherwise, return false.

Example 1:

Input: target = [9,3,5]
Output: true
Explanation: Start with arr = [1, 1, 1] 
[1, 1, 1], sum = 3 choose index 1
[1, 3, 1], sum = 5 choose index 2
[1, 3, 5], sum = 9 choose index 0
[9, 3, 5] Done

Example 2:

Input: target = [1,1,1,2]
Output: false
Explanation: Impossible to create target array from [1,1,1,1].

Example 3:

Input: target = [8,5]
Output: true

Constraints:

• n == target.length
• 1 <= n <= 5 * 10^4
• 1 <= target[i] <= 10^9

2022-06-25
665. Non-decreasing Array

Topic: Array
Difficulty: Medium

Problem:
Given an array nums with n integers, your task is to check if it could become non-decreasing by modifying at most one element.

We define an array is non-decreasing if nums[i] <= nums[i + 1] holds for every i (0-based) such that (0 <= i <= n - 2).

Example 1:

Input: nums = [4,2,3]
Output: true
Explanation: You could modify the first 4 to 1 to get a non-decreasing array.

Example 2:

Input: nums = [4,2,1]
Output: false
Explanation: You can't get a non-decreasing array by modify at most one element.

Constraints:

• n == nums.length
• 1 <= n <= 10^4
• -10^5 <= nums[i] <= 10^5

2022-06-26
1423. Maximum Points You Can Obtain from Cards

Topic: Array, Sliding Window, Prefix Sum
Difficulty: Medium

Problem:
There are several cards arranged in a row, and each card has an associated number of points. The points are given in the integer array cardPoints.

In one step, you can take one card from the beginning or from the end of the row. You have to take exactly k cards.

Your score is the sum of the points of the cards you have taken.

Given the integer array cardPoints and the integer k, return the maximum score you can obtain.

Example 1:

Input: cardPoints = [1,2,3,4,5,6,1], k = 3
Output: 12
Explanation: After the first step, your score will always be 1. However, choosing the rightmost card first will maximize your total score. The optimal strategy is to take the three cards on the right, giving a final score of 1 + 6 + 5 = 12.

Example 2:

Input: cardPoints = [2,2,2], k = 2
Output: 4
Explanation: Regardless of which two cards you take, your score will always be 4.

Example 3:

Input: cardPoints = [9,7,7,9,7,7,9], k = 7
Output: 55
Explanation: You have to take all the cards. Your score is the sum of points of all cards.

Constraints:

• 1 <= cardPoints.length <= 10^5
• 1 <= cardPoints[i] <= 10^4
• 1 <= k <= cardPoints.length

2022-06-27
1689. Partitioning Into Minimum Number Of Deci-Binary Numbers

Topic: String, Greedy
Difficulty: Medium

Problem:
A decimal number is called deci-binary if each of its digits is either 0 or 1 without any leading zeros. For example, 101 and 1100 are deci-binary, while 112 and 3001 are not.

Given a string n that represents a positive decimal integer, return the minimum number of positive deci-binary numbers needed so that they sum up to n.

Example 1:

Input: n = "32"
Output: 3
Explanation: 10 + 11 + 11 = 32

Example 2:

Input: n = "82734"
Output: 8

Example 3:

Input: n = "27346209830709182346"
Output: 9

Constraints:

• 1 <= n.length <= 10^5
• n consists of only digits.
• n does not contain any leading zeros and represents a positive integer.

2022-06-28
1647. Minimum Deletions to Make Character Frequencies Unique

Topic: String, Greedy, Sorting
Difficulty: Medium

Problem:
A string s is called good if there are no two different characters in s that have the same frequency.

Given a string s, return the minimum number of characters you need to delete to make s good.

The frequency of a character in a string is the number of times it appears in the string. For example, in the string "aab", the frequency of 'a' is 2, while the frequency of 'b' is 1.

Example 1:

Input: s = "aab"
Output: 0
Explanation: s is already good.

Example 2:

Input: s = "aaabbbcc"
Output: 2
Explanation: You can delete two 'b's resulting in the good string "aaabcc".
Another way it to delete one 'b' and one 'c' resulting in the good string "aaabbc".

Example 3:

Input: s = "ceabaacb"
Output: 2
Explanation: You can delete both 'c's resulting in the good string "eabaab".
Note that we only care about characters that are still in the string at the end (i.e. frequency of 0 is ignored).

Constraints:

• 1 <= s.length <= 10^5
• s contains only lowercase English letters.

2022-06-29
406. Queue Reconstruction by Height

Topic: Array, Greedy, Binary Indexed Tree, Segment Tree, Sorting
Difficulty: Medium

Problem:
You are given an array of people, people, which are the attributes of some people in a queue (not necessarily in order). Each people[i] = [h_i, k_i] represents the i^th person of height h_i with exactly k_i other people in front who have a height greater than or equal to h_i.

Reconstruct and return the queue that is represented by the input array people. The returned queue should be formatted as an array queue, where queue[j] = [h_j, k_j] is the attributes of the j^th person in the queue (queue[0] is the person at the front of the queue).

Example 1:

Input: people = [[7,0],[4,4],[7,1],[5,0],[6,1],[5,2]]
Output: [[5,0],[7,0],[5,2],[6,1],[4,4],[7,1]]
Explanation:
Person 0 has height 5 with no other people taller or the same height in front.
Person 1 has height 7 with no other people taller or the same height in front.
Person 2 has height 5 with two persons taller or the same height in front, which is person 0 and 1.
Person 3 has height 6 with one person taller or the same height in front, which is person 1.
Person 4 has height 4 with four people taller or the same height in front, which are people 0, 1, 2, and 3.
Person 5 has height 7 with one person taller or the same height in front, which is person 1.
Hence [[5,0],[7,0],[5,2],[6,1],[4,4],[7,1]] is the reconstructed queue.

Example 2:

Input: people = [[6,0],[5,0],[4,0],[3,2],[2,2],[1,4]]
Output: [[4,0],[5,0],[2,2],[3,2],[1,4],[6,0]]

Constraints:

• 1 <= people.length <= 2000
• 0 <= h_i <= 10^6
• 0 <= k_i < people.length
• It is guaranteed that the queue can be reconstructed.

2022-06-30
462. Minimum Moves to Equal Array Elements II

Topic: Array, Math, Sorting
Difficulty: Medium

Problem:
Given an integer array nums of size n, return the minimum number of moves required to make all array elements equal.

In one move, you can increment or decrement an element of the array by 1.

Test cases are designed so that the answer will fit in a 32-bit integer.

Example 1:

Input: nums = [1,2,3]
Output: 2
Explanation:
Only two moves are needed (remember each move increments or decrements one element):
[1,2,3]  =>  [2,2,3]  =>  [2,2,2]

Example 2:

Input: nums = [1,10,2,9]
Output: 16

Constraints:

• n == nums.length
• 1 <= nums.length <= 10^5
• -10^9 <= nums[i] <= 10^9

2022-07-01
1710. Maximum Units on a Truck

Topic: Array, Greedy, Sorting
Difficulty: Easy

Problem:
You are assigned to put some amount of boxes onto one truck. You are given a 2D array boxTypes, where boxTypes[i] = [numberOfBoxes_i, numberOfUnitsPerBox_i]:

• numberOfBoxes_i is the number of boxes of type i.
• numberOfUnitsPerBox_i is the number of units in each box of the type i.

You are also given an integer truckSize, which is the maximum number of boxes that can be put on the truck. You can choose any boxes to put on the truck as long as the number of boxes does not exceed truckSize.

Return the maximum total number of units that can be put on the truck.

Example 1:

Input: boxTypes = [[1,3],[2,2],[3,1]], truckSize = 4
Output: 8
Explanation: There are:
- 1 box of the first type that contains 3 units.
- 2 boxes of the second type that contain 2 units each.
- 3 boxes of the third type that contain 1 unit each.
You can take all the boxes of the first and second types, and one box of the third type.
The total number of units will be = (1 * 3) + (2 * 2) + (1 * 1) = 8.

Example 2:

Input: boxTypes = [[5,10],[2,5],[4,7],[3,9]], truckSize = 10
Output: 91

Constraints:

• 1 <= boxTypes.length <= 1000
• 1 <= numberOfBoxes_i, numberOfUnitsPerBox_i <= 1000
• 1 <= truckSize <= 10^6

2022-07-02
1465. Maximum Area of a Piece of Cake After Horizontal and Vertical Cuts

Topic: Array, Greedy, Sorting
Difficulty: Medium

Problem:
You are given a rectangular cake of size h x w and two arrays of integers horizontalCuts and verticalCuts where:

• horizontalCuts[i] is the distance from the top of the rectangular cake to the i^th horizontal cut and similarly, and
• verticalCuts[j] is the distance from the left of the rectangular cake to the j^th vertical cut.

Return the maximum area of a piece of cake after you cut at each horizontal and vertical position provided in the arrays horizontalCuts and verticalCuts. Since the answer can be a large number, return this modulo 10^9 + 7.

Example 1:

Image: https://assets.leetcode.com/uploads/2020/05/14/leetcode_max_area_2.png

Input: h = 5, w = 4, horizontalCuts = [1,2,4], verticalCuts = [1,3]
Output: 4 
Explanation: The figure above represents the given rectangular cake. Red lines are the horizontal and vertical cuts. After you cut the cake, the green piece of cake has the maximum area.

Example 2:

Image: https://assets.leetcode.com/uploads/2020/05/14/leetcode_max_area_3.png

Input: h = 5, w = 4, horizontalCuts = [3,1], verticalCuts = [1]
Output: 6
Explanation: The figure above represents the given rectangular cake. Red lines are the horizontal and vertical cuts. After you cut the cake, the green and yellow pieces of cake have the maximum area.

Example 3:

Input: h = 5, w = 4, horizontalCuts = [3], verticalCuts = [3]
Output: 9

Constraints:

• 2 <= h, w <= 10^9
• 1 <= horizontalCuts.length <= min(h - 1, 10^5)
• 1 <= verticalCuts.length <= min(w - 1, 10^5)
• 1 <= horizontalCuts[i] < h
• 1 <= verticalCuts[i] < w
• All the elements in horizontalCuts are distinct.
• All the elements in verticalCuts are distinct.

2022-07-03
376. Wiggle Subsequence

Topic: Array, Dynamic Programming, Greedy
Difficulty: Medium

Problem:
A wiggle sequence is a sequence where the differences between successive numbers strictly alternate between positive and negative. The first difference (if one exists) may be either positive or negative. A sequence with one element and a sequence with two non-equal elements are trivially wiggle sequences.

• For example, [1, 7, 4, 9, 2, 5] is a wiggle sequence because the differences (6, -3, 5, -7, 3) alternate between positive and negative.
• In contrast, [1, 4, 7, 2, 5] and [1, 7, 4, 5, 5] are not wiggle sequences. The first is not because its first two differences are positive, and the second is not because its last difference is zero.

A subsequence is obtained by deleting some elements (possibly zero) from the original sequence, leaving the remaining elements in their original order.

Given an integer array nums, return the length of the longest wiggle subsequence of nums.

Example 1:

Input: nums = [1,7,4,9,2,5]
Output: 6
Explanation: The entire sequence is a wiggle sequence with differences (6, -3, 5, -7, 3).

Example 2:

Input: nums = [1,17,5,10,13,15,10,5,16,8]
Output: 7
Explanation: There are several subsequences that achieve this length.
One is [1, 17, 10, 13, 10, 16, 8] with differences (16, -7, 3, -3, 6, -8).

Example 3:

Input: nums = [1,2,3,4,5,6,7,8,9]
Output: 2

Constraints:

• 1 <= nums.length <= 1000
• 0 <= nums[i] <= 1000

Follow up: Could you solve this in O(n) time?

2022-07-04
135. Candy

Topic: Array, Greedy
Difficulty: Hard

Problem:
There are n children standing in a line. Each child is assigned a rating value given in the integer array ratings.

You are giving candies to these children subjected to the following requirements:

• Each child must have at least one candy.
• Children with a higher rating get more candies than their neighbors.

Return the minimum number of candies you need to have to distribute the candies to the children.

Example 1:

Input: ratings = [1,0,2]
Output: 5
Explanation: You can allocate to the first, second and third child with 2, 1, 2 candies respectively.

Example 2:

Input: ratings = [1,2,2]
Output: 4
Explanation: You can allocate to the first, second and third child with 1, 2, 1 candies respectively.
The third child gets 1 candy because it satisfies the above two conditions.

Constraints:

• n == ratings.length
• 1 <= n <= 2 * 10^4
• 0 <= ratings[i] <= 2 * 10^4

2022-07-05
128. Longest Consecutive Sequence

Topic: Array, Hash Table, Union Find
Difficulty: Medium

Problem:
Given an unsorted array of integers nums, return the length of the longest consecutive elements sequence.

You must write an algorithm that runs in O(n) time.

Example 1:

Input: nums = [100,4,200,1,3,2]
Output: 4
Explanation: The longest consecutive elements sequence is [1, 2, 3, 4]. Therefore its length is 4.

Example 2:

Input: nums = [0,3,7,2,5,8,4,6,0,1]
Output: 9

Constraints:

• 0 <= nums.length <= 10^5
• -10^9 <= nums[i] <= 10^9

2022-07-06
509. Fibonacci Number

Topic: Math, Dynamic Programming, Recursion, Memoization
Difficulty: Easy

Problem:
The Fibonacci numbers, commonly denoted F(n) form a sequence, called the Fibonacci sequence, such that each number is the sum of the two preceding ones, starting from 0 and 1. That is,

F(0) = 0, F(1) = 1
F(n) = F(n - 1) + F(n - 2), for n > 1.

Given n, calculate F(n).

Example 1:

Input: n = 2
Output: 1
Explanation: F(2) = F(1) + F(0) = 1 + 0 = 1.

Example 2:

Input: n = 3
Output: 2
Explanation: F(3) = F(2) + F(1) = 1 + 1 = 2.

Example 3:

Input: n = 4
Output: 3
Explanation: F(4) = F(3) + F(2) = 2 + 1 = 3.

Constraints:

• 0 <= n <= 30

2022-07-07
97. Interleaving String

Topic: String, Dynamic Programming
Difficulty: Medium

Problem:
Given strings s1, s2, and s3, find whether s3 is formed by an interleaving of s1 and s2.

An interleaving of two strings s and t is a configuration where they are divided into non-empty substrings such that:

• s = s_1 + s_2 + ... + s_n
• t = t_1 + t_2 + ... + t_m
• |n - m| <= 1
• The interleaving is s_1 + t_1 + s_2 + t_2 + s_3 + t_3 + ... or t_1 + s_1 + t_2 + s_2 + t_3 + s_3 + ...

Note: a + b is the concatenation of strings a and b.

Example 1:

Image: https://assets.leetcode.com/uploads/2020/09/02/interleave.jpg

Input: s1 = "aabcc", s2 = "dbbca", s3 = "aadbbcbcac"
Output: true

Example 2:

Input: s1 = "aabcc", s2 = "dbbca", s3 = "aadbbbaccc"
Output: false

Example 3:

Input: s1 = "", s2 = "", s3 = ""
Output: true

Constraints:

• 0 <= s1.length, s2.length <= 100
• 0 <= s3.length <= 200
• s1, s2, and s3 consist of lowercase English letters.

Follow up: Could you solve it using only O(s2.length) additional memory space?

2022-07-08
1473. Paint House III

Topic: Array, Dynamic Programming
Difficulty: Hard

Problem:
There is a row of m houses in a small city, each house must be painted with one of the n colors (labeled from 1 to n), some houses that have been painted last summer should not be painted again.

A neighborhood is a maximal group of continuous houses that are painted with the same color.

• For example: houses = [1,2,2,3,3,2,1,1] contains 5 neighborhoods [{1}, {2,2}, {3,3}, {2}, {1,1}].

Given an array houses, an m x n matrix cost and an integer target where:

• houses[i]: is the color of the house i, and 0 if the house is not painted yet.
• cost[i][j]: is the cost of paint the house i with the color j + 1.

Return the minimum cost of painting all the remaining houses in such a way that there are exactly target neighborhoods. If it is not possible, return -1.

Example 1:

Input: houses = [0,0,0,0,0], cost = [[1,10],[10,1],[10,1],[1,10],[5,1]], m = 5, n = 2, target = 3
Output: 9
Explanation: Paint houses of this way [1,2,2,1,1]
This array contains target = 3 neighborhoods, [{1}, {2,2}, {1,1}].
Cost of paint all houses (1 + 1 + 1 + 1 + 5) = 9.

Example 2:

Input: houses = [0,2,1,2,0], cost = [[1,10],[10,1],[10,1],[1,10],[5,1]], m = 5, n = 2, target = 3
Output: 11
Explanation: Some houses are already painted, Paint the houses of this way [2,2,1,2,2]
This array contains target = 3 neighborhoods, [{2,2}, {1}, {2,2}]. 
Cost of paint the first and last house (10 + 1) = 11.

Example 3:

Input: houses = [3,1,2,3], cost = [[1,1,1],[1,1,1],[1,1,1],[1,1,1]], m = 4, n = 3, target = 3
Output: -1
Explanation: Houses are already painted with a total of 4 neighborhoods [{3},{1},{2},{3}] different of target = 3.

Constraints:

• m == houses.length == cost.length
• n == cost[i].length
• 1 <= m <= 100
• 1 <= n <= 20
• 1 <= target <= m
• 0 <= houses[i] <= n
• 1 <= cost[i][j] <= 10^4

2022-07-09
1696. Jump Game VI

Topic: Array, Dynamic Programming, Queue, Sliding Window, Heap (Priority Queue), Monotonic Queue
Difficulty: Medium

Problem:
You are given a 0-indexed integer array nums and an integer k.

You are initially standing at index 0. In one move, you can jump at most k steps forward without going outside the boundaries of the array. That is, you can jump from index i to any index in the range [i + 1, min(n - 1, i + k)] inclusive.

You want to reach the last index of the array (index n - 1). Your score is the sum of all nums[j] for each index j you visited in the array.

Return the maximum score you can get.

Example 1:

Input: nums = [1,-1,-2,4,-7,3], k = 2
Output: 7
Explanation: You can choose your jumps forming the subsequence [1,-1,4,3] (underlined above). The sum is 7.

Example 2:

Input: nums = [10,-5,-2,4,0,3], k = 3
Output: 17
Explanation: You can choose your jumps forming the subsequence [10,4,3] (underlined above). The sum is 17.

Example 3:

Input: nums = [1,-5,-20,4,-1,3,-6,-3], k = 2
Output: 0

Constraints:

• 1 <= nums.length, k <= 10^5
• -10^4 <= nums[i] <= 10^4

2022-07-10
746. Min Cost Climbing Stairs

Topic: Array, Dynamic Programming
Difficulty: Easy

Problem:
You are given an integer array cost where cost[i] is the cost of i^th step on a staircase. Once you pay the cost, you can either climb one or two steps.

You can either start from the step with index 0, or the step with index 1.

Return the minimum cost to reach the top of the floor.

Example 1:

Input: cost = [10,15,20]
Output: 15
Explanation: You will start at index 1.
- Pay 15 and climb two steps to reach the top.
The total cost is 15.

Example 2:

Input: cost = [1,100,1,1,1,100,1,1,100,1]
Output: 6
Explanation: You will start at index 0.
- Pay 1 and climb two steps to reach index 2.
- Pay 1 and climb two steps to reach index 4.
- Pay 1 and climb two steps to reach index 6.
- Pay 1 and climb one step to reach index 7.
- Pay 1 and climb two steps to reach index 9.
- Pay 1 and climb one step to reach the top.
The total cost is 6.

Constraints:

• 2 <= cost.length <= 1000
• 0 <= cost[i] <= 999

2022-07-11
199. Binary Tree Right Side View

Topic: Tree, Depth-First Search, Breadth-First Search, Binary Tree
Difficulty: Medium

Problem:
Given the root of a binary tree, imagine yourself standing on the right side of it, return the values of the nodes you can see ordered from top to bottom.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/02/14/tree.jpg

Input: root = [1,2,3,null,5,null,4]
Output: [1,3,4]

Example 2:

Input: root = [1,null,3]
Output: [1,3]

Example 3:

Input: root = []
Output: []

Constraints:

• The number of nodes in the tree is in the range [0, 100].
• -100 <= Node.val <= 100

2022-07-12
473. Matchsticks to Square

Topic: Array, Dynamic Programming, Backtracking, Bit Manipulation, Bitmask
Difficulty: Medium

Problem:
You are given an integer array matchsticks where matchsticks[i] is the length of the i^th matchstick. You want to use all the matchsticks to make one square. You should not break any stick, but you can link them up, and each matchstick must be used exactly one time.

Return true if you can make this square and false otherwise.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/04/09/matchsticks1-grid.jpg

Input: matchsticks = [1,1,2,2,2]
Output: true
Explanation: You can form a square with length 2, one side of the square came two sticks with length 1.

Example 2:

Input: matchsticks = [3,3,3,3,4]
Output: false
Explanation: You cannot find a way to form a square with all the matchsticks.

Constraints:

• 1 <= matchsticks.length <= 15
• 1 <= matchsticks[i] <= 10^8