2023-09-02
2707. Extra Characters in a String

Topic: Array, Hash Table, String, Dynamic Programming, Trie
Difficulty: Medium

Problem:
You are given a 0-indexed string s and a dictionary of words dictionary. You have to break s into one or more non-overlapping substrings such that each substring is present in dictionary. There may be some extra characters in s which are not present in any of the substrings.

Return the minimum number of extra characters left over if you break up s optimally.

Example 1:

Input: s = "leetscode", dictionary = ["leet","code","leetcode"]
Output: 1
Explanation: We can break s in two substrings: "leet" from index 0 to 3 and "code" from index 5 to 8. There is only 1 unused character (at index 4), so we return 1.

Example 2:

Input: s = "sayhelloworld", dictionary = ["hello","world"]
Output: 3
Explanation: We can break s in two substrings: "hello" from index 3 to 7 and "world" from index 8 to 12. The characters at indices 0, 1, 2 are not used in any substring and thus are considered as extra characters. Hence, we return 3.

Constraints:

• 1 <= s.length <= 50
• 1 <= dictionary.length <= 50
• 1 <= dictionary[i].length <= 50
• dictionary[i] and s consists of only lowercase English letters
• dictionary contains distinct words

2023-09-03
62. Unique Paths

Topic: Math, Dynamic Programming, Combinatorics
Difficulty: Medium

Problem:
There is a robot on an m x n grid. The robot is initially located at the top-left corner (i.e., grid[0][0]). The robot tries to move to the bottom-right corner (i.e., grid[m - 1][n - 1]). The robot can only move either down or right at any point in time.

Given the two integers m and n, return the number of possible unique paths that the robot can take to reach the bottom-right corner.

The test cases are generated so that the answer will be less than or equal to 2 * 10^9.

Example 1:

Image: https://assets.leetcode.com/uploads/2018/10/22/robot_maze.png

Input: m = 3, n = 7
Output: 28

Example 2:

Input: m = 3, n = 2
Output: 3
Explanation: From the top-left corner, there are a total of 3 ways to reach the bottom-right corner:
1. Right -> Down -> Down
2. Down -> Down -> Right
3. Down -> Right -> Down

Constraints:

• 1 <= m, n <= 100

2023-09-04
141. Linked List Cycle

Topic: Hash Table, Linked List, Two Pointers
Difficulty: Easy

Problem:
Given head, the head of a linked list, determine if the linked list has a cycle in it.

There is a cycle in a linked list if there is some node in the list that can be reached again by continuously following the next pointer. Internally, pos is used to denote the index of the node that tail's next pointer is connected to. Note that pos is not passed as a parameter.

Return true if there is a cycle in the linked list. Otherwise, return false.

Example 1:

Image: https://assets.leetcode.com/uploads/2018/12/07/circularlinkedlist.png

Input: head = [3,2,0,-4], pos = 1
Output: true
Explanation: There is a cycle in the linked list, where the tail connects to the 1st node (0-indexed).

Example 2:

Image: https://assets.leetcode.com/uploads/2018/12/07/circularlinkedlist_test2.png

Input: head = [1,2], pos = 0
Output: true
Explanation: There is a cycle in the linked list, where the tail connects to the 0th node.

Example 3:

Image: https://assets.leetcode.com/uploads/2018/12/07/circularlinkedlist_test3.png

Input: head = [1], pos = -1
Output: false
Explanation: There is no cycle in the linked list.

Constraints:

• The number of the nodes in the list is in the range [0, 10^4].
• -10^5 <= Node.val <= 10^5
• pos is -1 or a valid index in the linked-list.

Follow up: Can you solve it using O(1) (i.e. constant) memory?

2023-09-05
138. Copy List with Random Pointer

Topic: Hash Table, Linked List
Difficulty: Medium

Problem:
A linked list of length n is given such that each node contains an additional random pointer, which could point to any node in the list, or null.

Construct a deep copy of the list. The deep copy should consist of exactly n brand new nodes, where each new node has its value set to the value of its corresponding original node. Both the next and random pointer of the new nodes should point to new nodes in the copied list such that the pointers in the original list and copied list represent the same list state. None of the pointers in the new list should point to nodes in the original list.

For example, if there are two nodes X and Y in the original list, where X.random --> Y, then for the corresponding two nodes x and y in the copied list, x.random --> y.

Return the head of the copied linked list.

The linked list is represented in the input/output as a list of n nodes. Each node is represented as a pair of [val, random_index] where:

• val: an integer representing Node.val
• random_index: the index of the node (range from 0 to n-1) that the random pointer points to, or null if it does not point to any node.

Your code will only be given the head of the original linked list.

Example 1:

Image: https://assets.leetcode.com/uploads/2019/12/18/e1.png

Input: head = [[7,null],[13,0],[11,4],[10,2],[1,0]]
Output: [[7,null],[13,0],[11,4],[10,2],[1,0]]

Example 2:

Image: https://assets.leetcode.com/uploads/2019/12/18/e2.png

Input: head = [[1,1],[2,1]]
Output: [[1,1],[2,1]]

Example 3:

Image: https://assets.leetcode.com/uploads/2019/12/18/e3.png

Input: head = [[3,null],[3,0],[3,null]]
Output: [[3,null],[3,0],[3,null]]

Constraints:

• 0 <= n <= 1000
• -10^4 <= Node.val <= 10^4
• Node.random is null or is pointing to some node in the linked list.

2023-09-06
725. Split Linked List in Parts

Topic: Linked List
Difficulty: Medium

Problem:
Given the head of a singly linked list and an integer k, split the linked list into k consecutive linked list parts.

The length of each part should be as equal as possible: no two parts should have a size differing by more than one. This may lead to some parts being null.

The parts should be in the order of occurrence in the input list, and parts occurring earlier should always have a size greater than or equal to parts occurring later.

Return an array of the k parts.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/06/13/split1-lc.jpg

Input: head = [1,2,3], k = 5
Output: [[1],[2],[3],[],[]]
Explanation:
The first element output[0] has output[0].val = 1, output[0].next = null.
The last element output[4] is null, but its string representation as a ListNode is [].

Example 2:

Image: https://assets.leetcode.com/uploads/2021/06/13/split2-lc.jpg

Input: head = [1,2,3,4,5,6,7,8,9,10], k = 3
Output: [[1,2,3,4],[5,6,7],[8,9,10]]
Explanation:
The input has been split into consecutive parts with size difference at most 1, and earlier parts are a larger size than the later parts.

Constraints:

• The number of nodes in the list is in the range [0, 1000].
• 0 <= Node.val <= 1000
• 1 <= k <= 50

2023-09-07
92. Reverse Linked List II

Topic: Linked List
Difficulty: Medium

Problem:
Given the head of a singly linked list and two integers left and right where left <= right, reverse the nodes of the list from position left to position right, and return the reversed list.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/02/19/rev2ex2.jpg

Input: head = [1,2,3,4,5], left = 2, right = 4
Output: [1,4,3,2,5]

Example 2:

Input: head = [5], left = 1, right = 1
Output: [5]

Constraints:

• The number of nodes in the list is n.
• 1 <= n <= 500
• -500 <= Node.val <= 500
• 1 <= left <= right <= n

Follow up: Could you do it in one pass?

2023-09-08
118. Pascal's Triangle

Topic: Array, Dynamic Programming
Difficulty: Easy

Problem:
Given an integer numRows, return the first numRows of Pascal's triangle.

In Pascal's triangle, each number is the sum of the two numbers directly above it as shown:

Image: https://upload.wikimedia.org/wikipedia/commons/0/0d/PascalTriangleAnimated2.gif

Example 1:

Input: numRows = 5
Output: [[1],[1,1],[1,2,1],[1,3,3,1],[1,4,6,4,1]]

Example 2:

Input: numRows = 1
Output: [[1]]

Constraints:

• 1 <= numRows <= 30

2023-09-09
377. Combination Sum IV

Topic: Array, Dynamic Programming
Difficulty: Medium

Problem:
Given an array of distinct integers nums and a target integer target, return the number of possible combinations that add up to target.

The test cases are generated so that the answer can fit in a 32-bit integer.

Example 1:

Input: nums = [1,2,3], target = 4
Output: 7
Explanation:
The possible combination ways are:
(1, 1, 1, 1)
(1, 1, 2)
(1, 2, 1)
(1, 3)
(2, 1, 1)
(2, 2)
(3, 1)
Note that different sequences are counted as different combinations.

Example 2:

Input: nums = [9], target = 3
Output: 0

Constraints:

• 1 <= nums.length <= 200
• 1 <= nums[i] <= 1000
• All the elements of nums are unique.
• 1 <= target <= 1000

Follow up: What if negative numbers are allowed in the given array? How does it change the problem? What limitation we need to add to the question to allow negative numbers?

2023-09-10
1359. Count All Valid Pickup and Delivery Options

Topic: Math, Dynamic Programming, Combinatorics
Difficulty: Hard

Problem:
Given n orders, each order consist in pickup and delivery services. 

Count all valid pickup/delivery possible sequences such that delivery(i) is always after of pickup(i). 

Since the answer may be too large, return it modulo 10^9 + 7.

Example 1:

Input: n = 1
Output: 1
Explanation: Unique order (P1, D1), Delivery 1 always is after of Pickup 1.

Example 2:

Input: n = 2
Output: 6
Explanation: All possible orders: 
(P1,P2,D1,D2), (P1,P2,D2,D1), (P1,D1,P2,D2), (P2,P1,D1,D2), (P2,P1,D2,D1) and (P2,D2,P1,D1).
This is an invalid order (P1,D2,P2,D1) because Pickup 2 is after of Delivery 2.

Example 3:

Input: n = 3
Output: 90

Constraints:

• 1 <= n <= 500

2023-09-11
1282. Group the People Given the Group Size They Belong To

Topic: Array, Hash Table
Difficulty: Medium

Problem:
There are n people that are split into some unknown number of groups. Each person is labeled with a unique ID from 0 to n - 1.

You are given an integer array groupSizes, where groupSizes[i] is the size of the group that person i is in. For example, if groupSizes[1] = 3, then person 1 must be in a group of size 3.

Return a list of groups such that each person i is in a group of size groupSizes[i].

Each person should appear in exactly one group, and every person must be in a group. If there are multiple answers, return any of them. It is guaranteed that there will be at least one valid solution for the given input.

Example 1:

Input: groupSizes = [3,3,3,3,3,1,3]
Output: [[5],[0,1,2],[3,4,6]]
Explanation: 
The first group is [5]. The size is 1, and groupSizes[5] = 1.
The second group is [0,1,2]. The size is 3, and groupSizes[0] = groupSizes[1] = groupSizes[2] = 3.
The third group is [3,4,6]. The size is 3, and groupSizes[3] = groupSizes[4] = groupSizes[6] = 3.
Other possible solutions are [[2,1,6],[5],[0,4,3]] and [[5],[0,6,2],[4,3,1]].

Example 2:

Input: groupSizes = [2,1,3,3,3,2]
Output: [[1],[0,5],[2,3,4]]

Constraints:

• groupSizes.length == n
• 1 <= n <= 500
• 1 <= groupSizes[i] <= n

2023-09-12
1647. Minimum Deletions to Make Character Frequencies Unique

Topic: Hash Table, String, Greedy, Sorting
Difficulty: Medium

Problem:
A string s is called good if there are no two different characters in s that have the same frequency.

Given a string s, return the minimum number of characters you need to delete to make s good.

The frequency of a character in a string is the number of times it appears in the string. For example, in the string "aab", the frequency of 'a' is 2, while the frequency of 'b' is 1.

Example 1:

Input: s = "aab"
Output: 0
Explanation: s is already good.

Example 2:

Input: s = "aaabbbcc"
Output: 2
Explanation: You can delete two 'b's resulting in the good string "aaabcc".
Another way it to delete one 'b' and one 'c' resulting in the good string "aaabbc".

Example 3:

Input: s = "ceabaacb"
Output: 2
Explanation: You can delete both 'c's resulting in the good string "eabaab".
Note that we only care about characters that are still in the string at the end (i.e. frequency of 0 is ignored).

Constraints:

• 1 <= s.length <= 10^5
• s contains only lowercase English letters.

2023-09-13
135. Candy

Topic: Array, Greedy
Difficulty: Hard

Problem:
There are n children standing in a line. Each child is assigned a rating value given in the integer array ratings.

You are giving candies to these children subjected to the following requirements:

• Each child must have at least one candy.
• Children with a higher rating get more candies than their neighbors.

Return the minimum number of candies you need to have to distribute the candies to the children.

Example 1:

Input: ratings = [1,0,2]
Output: 5
Explanation: You can allocate to the first, second and third child with 2, 1, 2 candies respectively.

Example 2:

Input: ratings = [1,2,2]
Output: 4
Explanation: You can allocate to the first, second and third child with 1, 2, 1 candies respectively.
The third child gets 1 candy because it satisfies the above two conditions.

Constraints:

• n == ratings.length
• 1 <= n <= 2 * 10^4
• 0 <= ratings[i] <= 2 * 10^4

2023-09-14
332. Reconstruct Itinerary

Topic: Depth-First Search, Graph, Eulerian Circuit
Difficulty: Hard

Problem:
You are given a list of airline tickets where tickets[i] = [from_i, to_i] represent the departure and the arrival airports of one flight. Reconstruct the itinerary in order and return it.

All of the tickets belong to a man who departs from "JFK", thus, the itinerary must begin with "JFK". If there are multiple valid itineraries, you should return the itinerary that has the smallest lexical order when read as a single string.

• For example, the itinerary ["JFK", "LGA"] has a smaller lexical order than ["JFK", "LGB"].

You may assume all tickets form at least one valid itinerary. You must use all the tickets once and only once.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/03/14/itinerary1-graph.jpg

Input: tickets = [["MUC","LHR"],["JFK","MUC"],["SFO","SJC"],["LHR","SFO"]]
Output: ["JFK","MUC","LHR","SFO","SJC"]

Example 2:

Image: https://assets.leetcode.com/uploads/2021/03/14/itinerary2-graph.jpg

Input: tickets = [["JFK","SFO"],["JFK","ATL"],["SFO","ATL"],["ATL","JFK"],["ATL","SFO"]]
Output: ["JFK","ATL","JFK","SFO","ATL","SFO"]
Explanation: Another possible reconstruction is ["JFK","SFO","ATL","JFK","ATL","SFO"] but it is larger in lexical order.

Constraints:

• 1 <= tickets.length <= 300
• tickets[i].length == 2
• from_i.length == 3
• to_i.length == 3
• from_i and to_i consist of uppercase English letters.
• from_i != to_i

2023-09-15
1584. Min Cost to Connect All Points

Topic: Array, Union Find, Graph, Minimum Spanning Tree
Difficulty: Medium

Problem:
You are given an array points representing integer coordinates of some points on a 2D-plane, where points[i] = [x_i, y_i].

The cost of connecting two points [x_i, y_i] and [x_j, y_j] is the manhattan distance between them: |x_i - x_j| + |y_i - y_j|, where |val| denotes the absolute value of val.

Return the minimum cost to make all points connected. All points are connected if there is exactly one simple path between any two points.

Example 1:

Image: https://assets.leetcode.com/uploads/2020/08/26/d.png

Input: points = [[0,0],[2,2],[3,10],[5,2],[7,0]]
Output: 20
Explanation: 

Image: [https://assets.leetcode.com/uploads/2020/08/26/c.png](https://assets.leetcode.com/uploads/2020/08/26/c.png)

We can connect the points as shown above to get the minimum cost of 20.
Notice that there is a unique path between every pair of points.

Example 2:

Input: points = [[3,12],[-2,5],[-4,1]]
Output: 18

Constraints:

• 1 <= points.length <= 1000
• -10^6 <= x_i, y_i <= 10^6
• All pairs (x_i, y_i) are distinct.

2023-09-16
1631. Path With Minimum Effort

Topic: Array, Binary Search, Depth-First Search, Breadth-First Search, Union Find, Heap (Priority Queue), Matrix
Difficulty: Medium

Problem:
You are a hiker preparing for an upcoming hike. You are given heights, a 2D array of size rows x columns, where heights[row][col] represents the height of cell (row, col). You are situated in the top-left cell, (0, 0), and you hope to travel to the bottom-right cell, (rows-1, columns-1) (i.e., 0-indexed). You can move up, down, left, or right, and you wish to find a route that requires the minimum effort.

A route's effort is the maximum absolute difference in heights between two consecutive cells of the route.

Return the minimum effort required to travel from the top-left cell to the bottom-right cell.

Example 1:

Image: https://assets.leetcode.com/uploads/2020/10/04/ex1.png

Input: heights = [[1,2,2],[3,8,2],[5,3,5]]
Output: 2
Explanation: The route of [1,3,5,3,5] has a maximum absolute difference of 2 in consecutive cells.
This is better than the route of [1,2,2,2,5], where the maximum absolute difference is 3.

Example 2:

Image: https://assets.leetcode.com/uploads/2020/10/04/ex2.png

Input: heights = [[1,2,3],[3,8,4],[5,3,5]]
Output: 1
Explanation: The route of [1,2,3,4,5] has a maximum absolute difference of 1 in consecutive cells, which is better than route [1,3,5,3,5].

Example 3:

Image: https://assets.leetcode.com/uploads/2020/10/04/ex3.png

Input: heights = [[1,2,1,1,1],[1,2,1,2,1],[1,2,1,2,1],[1,2,1,2,1],[1,1,1,2,1]]
Output: 0
Explanation: This route does not require any effort.

Constraints:

• rows == heights.length
• columns == heights[i].length
• 1 <= rows, columns <= 100
• 1 <= heights[i][j] <= 10^6

2023-09-17
847. Shortest Path Visiting All Nodes

Topic: Dynamic Programming, Bit Manipulation, Breadth-First Search, Graph, Bitmask
Difficulty: Hard

Problem:
You have an undirected, connected graph of n nodes labeled from 0 to n - 1. You are given an array graph where graph[i] is a list of all the nodes connected with node i by an edge.

Return the length of the shortest path that visits every node. You may start and stop at any node, you may revisit nodes multiple times, and you may reuse edges.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/05/12/shortest1-graph.jpg

Input: graph = [[1,2,3],[0],[0],[0]]
Output: 4
Explanation: One possible path is [1,0,2,0,3]

Example 2:

Image: https://assets.leetcode.com/uploads/2021/05/12/shortest2-graph.jpg

Input: graph = [[1],[0,2,4],[1,3,4],[2],[1,2]]
Output: 4
Explanation: One possible path is [0,1,4,2,3]

Constraints:

• n == graph.length
• 1 <= n <= 12
• 0 <= graph[i].length < n
• graph[i] does not contain i.
• If graph[a] contains b, then graph[b] contains a.
• The input graph is always connected.

2023-09-18
1337. The K Weakest Rows in a Matrix

Topic: Array, Binary Search, Sorting, Heap (Priority Queue), Matrix
Difficulty: Easy

Problem:
You are given an m x n binary matrix mat of 1's (representing soldiers) and 0's (representing civilians). The soldiers are positioned in front of the civilians. That is, all the 1's will appear to the left of all the 0's in each row.

A row i is weaker than a row j if one of the following is true:

• The number of soldiers in row i is less than the number of soldiers in row j.
• Both rows have the same number of soldiers and i < j.

Return the indices of the k weakest rows in the matrix ordered from weakest to strongest.

Example 1:

Input: mat = 
[[1,1,0,0,0],
 [1,1,1,1,0],
 [1,0,0,0,0],
 [1,1,0,0,0],
 [1,1,1,1,1]], 
k = 3
Output: [2,0,3]
Explanation: 
The number of soldiers in each row is: 
- Row 0: 2 
- Row 1: 4 
- Row 2: 1 
- Row 3: 2 
- Row 4: 5 
The rows ordered from weakest to strongest are [2,0,3,1,4].

Example 2:

Input: mat = 
[[1,0,0,0],
 [1,1,1,1],
 [1,0,0,0],
 [1,0,0,0]], 
k = 2
Output: [0,2]
Explanation: 
The number of soldiers in each row is: 
- Row 0: 1 
- Row 1: 4 
- Row 2: 1 
- Row 3: 1 
The rows ordered from weakest to strongest are [0,2,3,1].

Constraints:

• m == mat.length
• n == mat[i].length
• 2 <= n, m <= 100
• 1 <= k <= m
• matrix[i][j] is either 0 or 1.

2023-09-19
287. Find the Duplicate Number

Topic: Array, Two Pointers, Binary Search, Bit Manipulation
Difficulty: Medium

Problem:
Given an array of integers nums containing n + 1 integers where each integer is in the range [1, n] inclusive.

There is only one repeated number in nums, return this repeated number.

You must solve the problem without modifying the array nums and uses only constant extra space.

Example 1:

Input: nums = [1,3,4,2,2]
Output: 2

Example 2:

Input: nums = [3,1,3,4,2]
Output: 3

Constraints:

• 1 <= n <= 10^5
• nums.length == n + 1
• 1 <= nums[i] <= n
• All the integers in nums appear only once except for precisely one integer which appears two or more times.

Follow up:

• How can we prove that at least one duplicate number must exist in nums?
• Can you solve the problem in linear runtime complexity?

2023-09-20
1658. Minimum Operations to Reduce X to Zero

Topic: Array, Hash Table, Binary Search, Sliding Window, Prefix Sum
Difficulty: Medium

Problem:
You are given an integer array nums and an integer x. In one operation, you can either remove the leftmost or the rightmost element from the array nums and subtract its value from x. Note that this modifies the array for future operations.

Return the minimum number of operations to reduce x to exactly 0 if it is possible, otherwise, return -1.

Example 1:

Input: nums = [1,1,4,2,3], x = 5
Output: 2
Explanation: The optimal solution is to remove the last two elements to reduce x to zero.

Example 2:

Input: nums = [5,6,7,8,9], x = 4
Output: -1

Example 3:

Input: nums = [3,2,20,1,1,3], x = 10
Output: 5
Explanation: The optimal solution is to remove the last three elements and the first two elements (5 operations in total) to reduce x to zero.

Constraints:

• 1 <= nums.length <= 10^5
• 1 <= nums[i] <= 10^4
• 1 <= x <= 10^9

2023-09-21
4. Median of Two Sorted Arrays

Topic: Array, Binary Search, Divide and Conquer
Difficulty: Hard

Problem:
Given two sorted arrays nums1 and nums2 of size m and n respectively, return the median of the two sorted arrays.

The overall run time complexity should be O(log (m+n)).

Example 1:

Input: nums1 = [1,3], nums2 = [2]
Output: 2.00000
Explanation: merged array = [1,2,3] and median is 2.

Example 2:

Input: nums1 = [1,2], nums2 = [3,4]
Output: 2.50000
Explanation: merged array = [1,2,3,4] and median is (2 + 3) / 2 = 2.5.

Constraints:

• nums1.length == m
• nums2.length == n
• 0 <= m <= 1000
• 0 <= n <= 1000
• 1 <= m + n <= 2000
• -10^6 <= nums1[i], nums2[i] <= 10^6