2024-08-28
1905. Count Sub Islands

Topic: Array, Depth-First Search, Breadth-First Search, Union Find, Matrix
Difficulty: Medium

Problem:
You are given two m x n binary matrices grid1 and grid2 containing only 0's (representing water) and 1's (representing land). An island is a group of 1's connected 4-directionally (horizontal or vertical). Any cells outside of the grid are considered water cells.

An island in grid2 is considered a sub-island if there is an island in grid1 that contains all the cells that make up this island in grid2.

Return the number of islands in grid2 that are considered sub-islands.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/06/10/test1.png

Input: grid1 = [[1,1,1,0,0],[0,1,1,1,1],[0,0,0,0,0],[1,0,0,0,0],[1,1,0,1,1]], grid2 = [[1,1,1,0,0],[0,0,1,1,1],[0,1,0,0,0],[1,0,1,1,0],[0,1,0,1,0]]
Output: 3
Explanation: In the picture above, the grid on the left is grid1 and the grid on the right is grid2.
The 1s colored red in grid2 are those considered to be part of a sub-island. There are three sub-islands.

Example 2:

Image: https://assets.leetcode.com/uploads/2021/06/03/testcasex2.png

Input: grid1 = [[1,0,1,0,1],[1,1,1,1,1],[0,0,0,0,0],[1,1,1,1,1],[1,0,1,0,1]], grid2 = [[0,0,0,0,0],[1,1,1,1,1],[0,1,0,1,0],[0,1,0,1,0],[1,0,0,0,1]]
Output: 2 
Explanation: In the picture above, the grid on the left is grid1 and the grid on the right is grid2.
The 1s colored red in grid2 are those considered to be part of a sub-island. There are two sub-islands.

Constraints:

• m == grid1.length == grid2.length
• n == grid1[i].length == grid2[i].length
• 1 <= m, n <= 500
• grid1[i][j] and grid2[i][j] are either 0 or 1.

2024-08-29
947. Most Stones Removed with Same Row or Column

Topic: Hash Table, Depth-First Search, Union Find, Graph
Difficulty: Medium

Problem:
On a 2D plane, we place n stones at some integer coordinate points. Each coordinate point may have at most one stone.

A stone can be removed if it shares either the same row or the same column as another stone that has not been removed.

Given an array stones of length n where stones[i] = [x_i, y_i] represents the location of the i^th stone, return the largest possible number of stones that can be removed.

Example 1:

Input: stones = [[0,0],[0,1],[1,0],[1,2],[2,1],[2,2]]
Output: 5
Explanation: One way to remove 5 stones is as follows:
1. Remove stone [2,2] because it shares the same row as [2,1].
2. Remove stone [2,1] because it shares the same column as [0,1].
3. Remove stone [1,2] because it shares the same row as [1,0].
4. Remove stone [1,0] because it shares the same column as [0,0].
5. Remove stone [0,1] because it shares the same row as [0,0].
Stone [0,0] cannot be removed since it does not share a row/column with another stone still on the plane.

Example 2:

Input: stones = [[0,0],[0,2],[1,1],[2,0],[2,2]]
Output: 3
Explanation: One way to make 3 moves is as follows:
1. Remove stone [2,2] because it shares the same row as [2,0].
2. Remove stone [2,0] because it shares the same column as [0,0].
3. Remove stone [0,2] because it shares the same row as [0,0].
Stones [0,0] and [1,1] cannot be removed since they do not share a row/column with another stone still on the plane.

Example 3:

Input: stones = [[0,0]]
Output: 0
Explanation: [0,0] is the only stone on the plane, so you cannot remove it.

Constraints:

• 1 <= stones.length <= 1000
• 0 <= x_i, y_i <= 10^4
• No two stones are at the same coordinate point.

2024-08-30
2699. Modify Graph Edge Weights

Topic: Graph, Heap (Priority Queue), Shortest Path
Difficulty: Hard

Problem:
You are given an undirected weighted connected graph containing n nodes labeled from 0 to n - 1, and an integer array edges where edges[i] = [a_i, b_i, w_i] indicates that there is an edge between nodes a_i and b_i with weight w_i.

Some edges have a weight of -1 (w_i = -1), while others have a positive weight (w_i > 0).

Your task is to modify all edges with a weight of -1 by assigning them positive integer values in the range [1, 2 * 10^9] so that the shortest distance between the nodes source and destination becomes equal to an integer target. If there are multiple modifications that make the shortest distance between source and destination equal to target, any of them will be considered correct.

Return an array containing all edges (even unmodified ones) in any order if it is possible to make the shortest distance from source to destination equal to target, or an empty array if it's impossible.

Note: You are not allowed to modify the weights of edges with initial positive weights.

Example 1:

Image: https://assets.leetcode.com/uploads/2023/04/18/graph.png

Input: n = 5, edges = [[4,1,-1],[2,0,-1],[0,3,-1],[4,3,-1]], source = 0, destination = 1, target = 5
Output: [[4,1,1],[2,0,1],[0,3,3],[4,3,1]]
Explanation: The graph above shows a possible modification to the edges, making the distance from 0 to 1 equal to 5.

Example 2:

Image: https://assets.leetcode.com/uploads/2023/04/18/graph-2.png

Input: n = 3, edges = [[0,1,-1],[0,2,5]], source = 0, destination = 2, target = 6
Output: []
Explanation: The graph above contains the initial edges. It is not possible to make the distance from 0 to 2 equal to 6 by modifying the edge with weight -1. So, an empty array is returned.

Example 3:

Image: https://assets.leetcode.com/uploads/2023/04/19/graph-3.png

Input: n = 4, edges = [[1,0,4],[1,2,3],[2,3,5],[0,3,-1]], source = 0, destination = 2, target = 6
Output: [[1,0,4],[1,2,3],[2,3,5],[0,3,1]]
Explanation: The graph above shows a modified graph having the shortest distance from 0 to 2 as 6.

Constraints:

• 1 <= n <= 100
• 1 <= edges.length <= n * (n - 1) / 2
• edges[i].length == 3
• 0 <= a_i, b_i < n
• w_i = -1or 1 <= w_i <= 10^7
• a_i != b_i
• 0 <= source, destination < n
• source != destination
• 1 <= target <= 10^9
• The graph is connected, and there are no self-loops or repeated edges

2024-08-31
1514. Path with Maximum Probability

Topic: Array, Graph, Heap (Priority Queue), Shortest Path
Difficulty: Medium

Problem:
You are given an undirected weighted graph of n nodes (0-indexed), represented by an edge list where edges[i] = [a, b] is an undirected edge connecting the nodes a and b with a probability of success of traversing that edge succProb[i].

Given two nodes start and end, find the path with the maximum probability of success to go from start to end and return its success probability.

If there is no path from start to end, return 0. Your answer will be accepted if it differs from the correct answer by at most 1e-5.

Example 1:

Image: https://assets.leetcode.com/uploads/2019/09/20/1558_ex1.png

Input: n = 3, edges = [[0,1],[1,2],[0,2]], succProb = [0.5,0.5,0.2], start = 0, end = 2
Output: 0.25000
Explanation: There are two paths from start to end, one having a probability of success = 0.2 and the other has 0.5 * 0.5 = 0.25.

Example 2:

Image: https://assets.leetcode.com/uploads/2019/09/20/1558_ex2.png

Input: n = 3, edges = [[0,1],[1,2],[0,2]], succProb = [0.5,0.5,0.3], start = 0, end = 2
Output: 0.30000

Example 3:

Image: https://assets.leetcode.com/uploads/2019/09/20/1558_ex3.png

Input: n = 3, edges = [[0,1]], succProb = [0.5], start = 0, end = 2
Output: 0.00000
Explanation: There is no path between 0 and 2.

Constraints:

• 2 <= n <= 10^4
• 0 <= start, end < n
• start != end
• 0 <= a, b < n
• a != b
• 0 <= succProb.length == edges.length <= 2*10^4
• 0 <= succProb[i] <= 1
• There is at most one edge between every two nodes.

2024-09-01
2022. Convert 1D Array Into 2D Array

Topic: Array, Matrix, Simulation
Difficulty: Easy

Problem:
You are given a 0-indexed 1-dimensional (1D) integer array original, and two integers, m and n. You are tasked with creating a 2-dimensional (2D) array with m rows and n columns using all the elements from original.

The elements from indices 0 to n - 1 (inclusive) of original should form the first row of the constructed 2D array, the elements from indices n to 2 * n - 1 (inclusive) should form the second row of the constructed 2D array, and so on.

Return an m x n 2D array constructed according to the above procedure, or an empty 2D array if it is impossible.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/08/26/image-20210826114243-1.png

Input: original = [1,2,3,4], m = 2, n = 2
Output: [[1,2],[3,4]]
Explanation: The constructed 2D array should contain 2 rows and 2 columns.
The first group of n=2 elements in original, [1,2], becomes the first row in the constructed 2D array.
The second group of n=2 elements in original, [3,4], becomes the second row in the constructed 2D array.

Example 2:

Input: original = [1,2,3], m = 1, n = 3
Output: [[1,2,3]]
Explanation: The constructed 2D array should contain 1 row and 3 columns.
Put all three elements in original into the first row of the constructed 2D array.

Example 3:

Input: original = [1,2], m = 1, n = 1
Output: []
Explanation: There are 2 elements in original.
It is impossible to fit 2 elements in a 1x1 2D array, so return an empty 2D array.

Constraints:

• 1 <= original.length <= 5 * 10^4
• 1 <= original[i] <= 10^5
• 1 <= m, n <= 4 * 10^4

2024-09-02
1894. Find the Student that Will Replace the Chalk

Topic: Array, Binary Search, Simulation, Prefix Sum
Difficulty: Medium

Problem:
There are n students in a class numbered from 0 to n - 1. The teacher will give each student a problem starting with the student number 0, then the student number 1, and so on until the teacher reaches the student number n - 1. After that, the teacher will restart the process, starting with the student number 0 again.

You are given a 0-indexed integer array chalk and an integer k. There are initially k pieces of chalk. When the student number i is given a problem to solve, they will use chalk[i] pieces of chalk to solve that problem. However, if the current number of chalk pieces is strictly less than chalk[i], then the student number i will be asked to replace the chalk.

Return the index of the student that will replace the chalk pieces.

Example 1:

Input: chalk = [5,1,5], k = 22
Output: 0
Explanation: The students go in turns as follows:
- Student number 0 uses 5 chalk, so k = 17.
- Student number 1 uses 1 chalk, so k = 16.
- Student number 2 uses 5 chalk, so k = 11.
- Student number 0 uses 5 chalk, so k = 6.
- Student number 1 uses 1 chalk, so k = 5.
- Student number 2 uses 5 chalk, so k = 0.
Student number 0 does not have enough chalk, so they will have to replace it.

Example 2:

Input: chalk = [3,4,1,2], k = 25
Output: 1
Explanation: The students go in turns as follows:
- Student number 0 uses 3 chalk so k = 22.
- Student number 1 uses 4 chalk so k = 18.
- Student number 2 uses 1 chalk so k = 17.
- Student number 3 uses 2 chalk so k = 15.
- Student number 0 uses 3 chalk so k = 12.
- Student number 1 uses 4 chalk so k = 8.
- Student number 2 uses 1 chalk so k = 7.
- Student number 3 uses 2 chalk so k = 5.
- Student number 0 uses 3 chalk so k = 2.
Student number 1 does not have enough chalk, so they will have to replace it.

Constraints:

• chalk.length == n
• 1 <= n <= 10^5
• 1 <= chalk[i] <= 10^5
• 1 <= k <= 10^9

2024-09-03
1945. Sum of Digits of String After Convert

Topic: String, Simulation
Difficulty: Easy

Problem:
You are given a string s consisting of lowercase English letters, and an integer k.

First, convert s into an integer by replacing each letter with its position in the alphabet (i.e., replace 'a' with 1, 'b' with 2, ..., 'z' with 26). Then, transform the integer by replacing it with the sum of its digits. Repeat the transform operation k times in total.

For example, if s = "zbax" and k = 2, then the resulting integer would be 8 by the following operations:

• Convert: "zbax" ➝ "(26)(2)(1)(24)" ➝ "262124" ➝ 262124
• Transform #1: 262124 ➝ 2 + 6 + 2 + 1 + 2 + 4 ➝ 17
• Transform #2: 17 ➝ 1 + 7 ➝ 8

Return the resulting integer after performing the operations described above.

Example 1:

Input: s = "iiii", k = 1
Output: 36
Explanation: The operations are as follows:
- Convert: "iiii" ➝ "(9)(9)(9)(9)" ➝ "9999" ➝ 9999
- Transform #1: 9999 ➝ 9 + 9 + 9 + 9 ➝ 36
Thus the resulting integer is 36.

Example 2:

Input: s = "leetcode", k = 2
Output: 6
Explanation: The operations are as follows:
- Convert: "leetcode" ➝ "(12)(5)(5)(20)(3)(15)(4)(5)" ➝ "12552031545" ➝ 12552031545
- Transform #1: 12552031545 ➝ 1 + 2 + 5 + 5 + 2 + 0 + 3 + 1 + 5 + 4 + 5 ➝ 33
- Transform #2: 33 ➝ 3 + 3 ➝ 6
Thus the resulting integer is 6.

Example 3:

Input: s = "zbax", k = 2
Output: 8

Constraints:

• 1 <= s.length <= 100
• 1 <= k <= 10
• s consists of lowercase English letters.

2024-09-04
874. Walking Robot Simulation

Topic: Array, Hash Table, Simulation
Difficulty: Medium

Problem:
A robot on an infinite XY-plane starts at point (0, 0) facing north. The robot can receive a sequence of these three possible types of commands:

• -2: Turn left 90 degrees.
• -1: Turn right 90 degrees.
• 1 <= k <= 9: Move forward k units, one unit at a time.

Some of the grid squares are obstacles. The i^th obstacle is at grid point obstacles[i] = (x_i, y_i). If the robot runs into an obstacle, then it will instead stay in its current location and move on to the next command.

Return the maximum Euclidean distance that the robot ever gets from the origin squared (i.e. if the distance is 5, return 25).

Note:

• North means +Y direction.
• East means +X direction.
• South means -Y direction.
• West means -X direction.
• There can be obstacle in 0,0.

Example 1:

Input: commands = [4,-1,3], obstacles = []
Output: 25
Explanation: The robot starts at (0, 0):
1. Move north 4 units to (0, 4).
2. Turn right.
3. Move east 3 units to (3, 4).
The furthest point the robot ever gets from the origin is (3, 4), which squared is 3^2 + 4^2 = 25 units away.

Example 2:

Input: commands = [4,-1,4,-2,4], obstacles = [[2,4]]
Output: 65
Explanation: The robot starts at (0, 0):
1. Move north 4 units to (0, 4).
2. Turn right.
3. Move east 1 unit and get blocked by the obstacle at (2, 4), robot is at (1, 4).
4. Turn left.
5. Move north 4 units to (1, 8).
The furthest point the robot ever gets from the origin is (1, 8), which squared is 1^2 + 8^2 = 65 units away.

Example 3:

Input: commands = [6,-1,-1,6], obstacles = []
Output: 36
Explanation: The robot starts at (0, 0):
1. Move north 6 units to (0, 6).
2. Turn right.
3. Turn right.
4. Move south 6 units to (0, 0).
The furthest point the robot ever gets from the origin is (0, 6), which squared is 6^2 = 36 units away.

Constraints:

• 1 <= commands.length <= 10^4
• commands[i] is either -2, -1, or an integer in the range [1, 9].
• 0 <= obstacles.length <= 10^4
• -3 * 10^4 <= x_i, y_i <= 3 * 10^4
• The answer is guaranteed to be less than 2^31.

2024-09-05
2028. Find Missing Observations

Topic: Array, Math, Simulation
Difficulty: Medium

Problem:
You have observations of n + m 6-sided dice rolls with each face numbered from 1 to 6. n of the observations went missing, and you only have the observations of m rolls. Fortunately, you have also calculated the average value of the n + m rolls.

You are given an integer array rolls of length m where rolls[i] is the value of the i^th observation. You are also given the two integers mean and n.

Return an array of length n containing the missing observations such that the average value of the n + m rolls is exactly mean. If there are multiple valid answers, return any of them. If no such array exists, return an empty array.

The average value of a set of k numbers is the sum of the numbers divided by k.

Note that mean is an integer, so the sum of the n + m rolls should be divisible by n + m.

Example 1:

Input: rolls = [3,2,4,3], mean = 4, n = 2
Output: [6,6]
Explanation: The mean of all n + m rolls is (3 + 2 + 4 + 3 + 6 + 6) / 6 = 4.

Example 2:

Input: rolls = [1,5,6], mean = 3, n = 4
Output: [2,3,2,2]
Explanation: The mean of all n + m rolls is (1 + 5 + 6 + 2 + 3 + 2 + 2) / 7 = 3.

Example 3:

Input: rolls = [1,2,3,4], mean = 6, n = 4
Output: []
Explanation: It is impossible for the mean to be 6 no matter what the 4 missing rolls are.

Constraints:

• m == rolls.length
• 1 <= n, m <= 10^5
• 1 <= rolls[i], mean <= 6

2024-09-06
3217. Delete Nodes From Linked List Present in Array

Topic: Array, Hash Table, Linked List
Difficulty: Medium

Problem:
You are given an array of integers nums and the head of a linked list. Return the head of the modified linked list after removing all nodes from the linked list that have a value that exists in nums.

Example 1:

Input: nums = 1,2,3, head = 1,2,3,4,5

Output: 4,5

Explanation:

Image: https://assets.leetcode.com/uploads/2024/06/11/linkedlistexample0.png

Remove the nodes with values 1, 2, and 3.

Example 2:

Input: nums = 1, head = 1,2,1,2,1,2

Output: 2,2,2

Explanation:

Image: https://assets.leetcode.com/uploads/2024/06/11/linkedlistexample1.png

Remove the nodes with value 1.

Example 3:

Input: nums = 5, head = 1,2,3,4

Output: 1,2,3,4

Explanation:

Image: https://assets.leetcode.com/uploads/2024/06/11/linkedlistexample2.png

No node has value 5.

Constraints:

• 1 <= nums.length <= 10^5
• 1 <= nums[i] <= 10^5
• All elements in nums are unique.
• The number of nodes in the given list is in the range [1, 10^5].
• 1 <= Node.val <= 10^5
• The input is generated such that there is at least one node in the linked list that has a value not present in nums.

2024-09-07
1367. Linked List in Binary Tree

Topic: Linked List, Tree, Depth-First Search, Breadth-First Search, Binary Tree
Difficulty: Medium

Problem:
Given a binary tree root and a linked list with head as the first node. 

Return True if all the elements in the linked list starting from the head correspond to some downward path connected in the binary tree otherwise return False.

In this context downward path means a path that starts at some node and goes downwards.

Example 1:

Image: https://assets.leetcode.com/uploads/2020/02/12/sample_1_1720.png

Input: head = [4,2,8], root = [1,4,4,null,2,2,null,1,null,6,8,null,null,null,null,1,3]
Output: true
Explanation: Nodes in blue form a subpath in the binary Tree.

Example 2:

Image: https://assets.leetcode.com/uploads/2020/02/12/sample_2_1720.png

Input: head = [1,4,2,6], root = [1,4,4,null,2,2,null,1,null,6,8,null,null,null,null,1,3]
Output: true

Example 3:

Input: head = [1,4,2,6,8], root = [1,4,4,null,2,2,null,1,null,6,8,null,null,null,null,1,3]
Output: false
Explanation: There is no path in the binary tree that contains all the elements of the linked list from head.

Constraints:

• The number of nodes in the tree will be in the range [1, 2500].
• The number of nodes in the list will be in the range [1, 100].
• 1 <= Node.val <= 100 for each node in the linked list and binary tree.

2024-09-08
725. Split Linked List in Parts

Topic: Linked List
Difficulty: Medium

Problem:
Given the head of a singly linked list and an integer k, split the linked list into k consecutive linked list parts.

The length of each part should be as equal as possible: no two parts should have a size differing by more than one. This may lead to some parts being null.

The parts should be in the order of occurrence in the input list, and parts occurring earlier should always have a size greater than or equal to parts occurring later.

Return an array of the k parts.

Example 1:

Image: https://assets.leetcode.com/uploads/2021/06/13/split1-lc.jpg

Input: head = [1,2,3], k = 5
Output: [[1],[2],[3],[],[]]
Explanation:
The first element output[0] has output[0].val = 1, output[0].next = null.
The last element output[4] is null, but its string representation as a ListNode is [].

Example 2:

Image: https://assets.leetcode.com/uploads/2021/06/13/split2-lc.jpg

Input: head = [1,2,3,4,5,6,7,8,9,10], k = 3
Output: [[1,2,3,4],[5,6,7],[8,9,10]]
Explanation:
The input has been split into consecutive parts with size difference at most 1, and earlier parts are a larger size than the later parts.

Constraints:

• The number of nodes in the list is in the range [0, 1000].
• 0 <= Node.val <= 1000
• 1 <= k <= 50

2024-09-09
2326. Spiral Matrix IV

Topic: Array, Linked List, Matrix, Simulation
Difficulty: Medium

Problem:
You are given two integers m and n, which represent the dimensions of a matrix.

You are also given the head of a linked list of integers.

Generate an m x n matrix that contains the integers in the linked list presented in spiral order (clockwise), starting from the top-left of the matrix. If there are remaining empty spaces, fill them with -1.

Return the generated matrix.

Example 1:

Image: https://assets.leetcode.com/uploads/2022/05/09/ex1new.jpg

Input: m = 3, n = 5, head = [3,0,2,6,8,1,7,9,4,2,5,5,0]
Output: [[3,0,2,6,8],[5,0,-1,-1,1],[5,2,4,9,7]]
Explanation: The diagram above shows how the values are printed in the matrix.
Note that the remaining spaces in the matrix are filled with -1.

Example 2:

Image: https://assets.leetcode.com/uploads/2022/05/11/ex2.jpg

Input: m = 1, n = 4, head = [0,1,2]
Output: [[0,1,2,-1]]
Explanation: The diagram above shows how the values are printed from left to right in the matrix.
The last space in the matrix is set to -1.

Constraints:

• 1 <= m, n <= 10^5
• 1 <= m * n <= 10^5
• The number of nodes in the list is in the range [1, m * n].
• 0 <= Node.val <= 1000

2024-09-10
2807. Insert Greatest Common Divisors in Linked List

Topic: Linked List, Math, Number Theory
Difficulty: Medium

Problem:
Given the head of a linked list head, in which each node contains an integer value.

Between every pair of adjacent nodes, insert a new node with a value equal to the greatest common divisor of them.

Return the linked list after insertion.

The greatest common divisor of two numbers is the largest positive integer that evenly divides both numbers.

Example 1:

Image: https://assets.leetcode.com/uploads/2023/07/18/ex1_copy.png

Input: head = [18,6,10,3]
Output: [18,6,6,2,10,1,3]
Explanation: The 1^st diagram denotes the initial linked list and the 2^nd diagram denotes the linked list after inserting the new nodes (nodes in blue are the inserted nodes).
- We insert the greatest common divisor of 18 and 6 = 6 between the 1^st and the 2^nd nodes.
- We insert the greatest common divisor of 6 and 10 = 2 between the 2^nd and the 3^rd nodes.
- We insert the greatest common divisor of 10 and 3 = 1 between the 3^rd and the 4^th nodes.
There are no more adjacent nodes, so we return the linked list.

Example 2:

Image: https://assets.leetcode.com/uploads/2023/07/18/ex2_copy1.png

Input: head = [7]
Output: [7]
Explanation: The 1^st diagram denotes the initial linked list and the 2^nd diagram denotes the linked list after inserting the new nodes.
There are no pairs of adjacent nodes, so we return the initial linked list.

Constraints:

• The number of nodes in the list is in the range [1, 5000].
• 1 <= Node.val <= 1000

2024-09-11
2220. Minimum Bit Flips to Convert Number

Topic: Bit Manipulation
Difficulty: Easy

Problem:
A bit flip of a number x is choosing a bit in the binary representation of x and flipping it from either 0 to 1 or 1 to 0.

• For example, for x = 7, the binary representation is 111 and we may choose any bit (including any leading zeros not shown) and flip it. We can flip the first bit from the right to get 110, flip the second bit from the right to get 101, flip the fifth bit from the right (a leading zero) to get 10111, etc.

Given two integers start and goal, return the minimum number of bit flips to convert start to goal.

Example 1:

Input: start = 10, goal = 7
Output: 3
Explanation: The binary representation of 10 and 7 are 1010 and 0111 respectively. We can convert 10 to 7 in 3 steps:
- Flip the first bit from the right: 1010 -> 1011.
- Flip the third bit from the right: 1011 -> 1111.
- Flip the fourth bit from the right: 1111 -> 0111.
It can be shown we cannot convert 10 to 7 in less than 3 steps. Hence, we return 3.

Example 2:

Input: start = 3, goal = 4
Output: 3
Explanation: The binary representation of 3 and 4 are 011 and 100 respectively. We can convert 3 to 4 in 3 steps:
- Flip the first bit from the right: 011 -> 010.
- Flip the second bit from the right: 010 -> 000.
- Flip the third bit from the right: 000 -> 100.
It can be shown we cannot convert 3 to 4 in less than 3 steps. Hence, we return 3.

Constraints:

• 0 <= start, goal <= 10^9

2024-09-12
1684. Count the Number of Consistent Strings

Topic: Array, Hash Table, String, Bit Manipulation, Counting
Difficulty: Easy

Problem:
You are given a string allowed consisting of distinct characters and an array of strings words. A string is consistent if all characters in the string appear in the string allowed.

Return the number of consistent strings in the array words.

Example 1:

Input: allowed = "ab", words = ["ad","bd","aaab","baa","badab"]
Output: 2
Explanation: Strings "aaab" and "baa" are consistent since they only contain characters 'a' and 'b'.

Example 2:

Input: allowed = "abc", words = ["a","b","c","ab","ac","bc","abc"]
Output: 7
Explanation: All strings are consistent.

Example 3:

Input: allowed = "cad", words = ["cc","acd","b","ba","bac","bad","ac","d"]
Output: 4
Explanation: Strings "cc", "acd", "ac", and "d" are consistent.

Constraints:

• 1 <= words.length <= 10^4
• 1 <= allowed.length <= 26
• 1 <= words[i].length <= 10
• The characters in allowed are distinct.
• words[i] and allowed contain only lowercase English letters.

2024-09-13
1310. XOR Queries of a Subarray

Topic: Array, Bit Manipulation, Prefix Sum
Difficulty: Medium

Problem:
You are given an array arr of positive integers. You are also given the array queries where queries[i] = [left_i, right_i].

For each query i compute the XOR of elements from left_i to right_i (that is, arr[left_i] XOR arr[left_i + 1] XOR ... XOR arr[right_i] ).

Return an array answer where answer[i] is the answer to the i^th query.

Example 1:

Input: arr = [1,3,4,8], queries = [[0,1],[1,2],[0,3],[3,3]]
Output: [2,7,14,8] 
Explanation: 
The binary representation of the elements in the array are:
1 = 0001 
3 = 0011 
4 = 0100 
8 = 1000 
The XOR values for queries are:
[0,1] = 1 xor 3 = 2 
[1,2] = 3 xor 4 = 7 
[0,3] = 1 xor 3 xor 4 xor 8 = 14 
[3,3] = 8

Example 2:

Input: arr = [4,8,2,10], queries = [[2,3],[1,3],[0,0],[0,3]]
Output: [8,0,4,4]

Constraints:

• 1 <= arr.length, queries.length <= 3 * 10^4
• 1 <= arr[i] <= 10^9
• queries[i].length == 2
• 0 <= left_i <= right_i < arr.length

2024-09-14
2419. Longest Subarray With Maximum Bitwise AND

Topic: Array, Bit Manipulation, Brainteaser
Difficulty: Medium

Problem:
You are given an integer array nums of size n.

Consider a non-empty subarray from nums that has the maximum possible bitwise AND.

• In other words, let k be the maximum value of the bitwise AND of any subarray of nums. Then, only subarrays with a bitwise AND equal to k should be considered.

Return the length of the longest such subarray.

The bitwise AND of an array is the bitwise AND of all the numbers in it.

A subarray is a contiguous sequence of elements within an array.

Example 1:

Input: nums = [1,2,3,3,2,2]
Output: 2
Explanation:
The maximum possible bitwise AND of a subarray is 3.
The longest subarray with that value is [3,3], so we return 2.

Example 2:

Input: nums = [1,2,3,4]
Output: 1
Explanation:
The maximum possible bitwise AND of a subarray is 4.
The longest subarray with that value is [4], so we return 1.

Constraints:

• 1 <= nums.length <= 10^5
• 1 <= nums[i] <= 10^6

2024-09-15
1371. Find the Longest Substring Containing Vowels in Even Counts

Topic: Hash Table, String, Bit Manipulation, Prefix Sum
Difficulty: Medium

Problem:
Given the string s, return the size of the longest substring containing each vowel an even number of times. That is, 'a', 'e', 'i', 'o', and 'u' must appear an even number of times.

Example 1:

Input: s = "eleetminicoworoep"
Output: 13
Explanation: The longest substring is "leetminicowor" which contains two each of the vowels: e, i and o and zero of the vowels: a and u.

Example 2:

Input: s = "leetcodeisgreat"
Output: 5
Explanation: The longest substring is "leetc" which contains two e's.

Example 3:

Input: s = "bcbcbc"
Output: 6
Explanation: In this case, the given string "bcbcbc" is the longest because all vowels: a, e, i, o and u appear zero times.

Constraints:

• 1 <= s.length <= 5 x 10^5
• s contains only lowercase English letters.

2024-09-16
539. Minimum Time Difference

Topic: Array, Math, String, Sorting
Difficulty: Medium

Problem:
Given a list of 24-hour clock time points in "HH:MM" format, return the minimum minutes difference between any two time-points in the list.

Example 1:

Input: timePoints = ["23:59","00:00"]
Output: 1

Example 2:

Input: timePoints = ["00:00","23:59","00:00"]
Output: 0

Constraints:

• 2 <= timePoints.length <= 2 * 10^4
• timePoints[i] is in the format "HH:MM".

2024-09-17
884. Uncommon Words from Two Sentences

Topic: Hash Table, String, Counting
Difficulty: Easy

Problem:
A sentence is a string of single-space separated words where each word consists only of lowercase letters.

A word is uncommon if it appears exactly once in one of the sentences, and does not appear in the other sentence.

Given two sentences s1 and s2, return a list of all the uncommon words. You may return the answer in any order.

Example 1:

Input: s1 = "this apple is sweet", s2 = "this apple is sour"

Output: "sweet","sour"

Explanation:

The word "sweet" appears only in s1, while the word "sour" appears only in s2.

Example 2:

Input: s1 = "apple apple", s2 = "banana"

Output: "banana"

Constraints:

• 1 <= s1.length, s2.length <= 200
• s1 and s2 consist of lowercase English letters and spaces.
• s1 and s2 do not have leading or trailing spaces.
• All the words in s1 and s2 are separated by a single space.