标题:HZ可以IPV6 ONLY了,省1.7刀
作者:tomcb
原帖:https://hostloc.com/thread-937635-1-1.html
摘要:https://status.hetzner.com/incident/78fde926-b749-4666-94bb-c5b5b3b3c266
Starting now, Primary IPv4 addresses will be an addon (IPv4 Addon) for dedicated root servers. They will appear as separate products on Robot and on future invoices.
We have reduced the price for dedicated root servers by the price for the IPv4 Addon. You will pay the same total price for both products (the IPv4 address and the dedicated root server). You can find more information on Hetzner Docs.
作者:tomcb
原帖:https://hostloc.com/thread-937635-1-1.html
摘要:https://status.hetzner.com/incident/78fde926-b749-4666-94bb-c5b5b3b3c266
Starting now, Primary IPv4 addresses will be an addon (IPv4 Addon) for dedicated root servers. They will appear as separate products on Robot and on future invoices.
We have reduced the price for dedicated root servers by the price for the IPv4 Addon. You will pay the same total price for both products (the IPv4 address and the dedicated root server). You can find more information on Hetzner Docs.
标题:vir是真的垃圾,5刀多的机器,剑皇命令都卡
作者:专业黑人抬棺
原帖:https://hostloc.com/thread-937633-1-1.html
摘要:vir是真的垃圾,5刀多的机器,剑皇命令都卡
手上开了Gcp 刷
看了下 有个 vir 的机器
想着刷着玩玩
命令居然直接能卡住
机器除了V2啥都没装
作者:专业黑人抬棺
原帖:https://hostloc.com/thread-937633-1-1.html
摘要:vir是真的垃圾,5刀多的机器,剑皇命令都卡
手上开了Gcp 刷
看了下 有个 vir 的机器
想着刷着玩玩
命令居然直接能卡住
机器除了V2啥都没装
标题:微信二维码收款提示这个
作者:leonvero
原帖:https://hostloc.com/thread-937632-1-1.html
摘要:你们碰到过吗,对方不敢付款了,我微信账户正常啊,有什么办法解除吗
作者:leonvero
原帖:https://hostloc.com/thread-937632-1-1.html
摘要:你们碰到过吗,对方不敢付款了,我微信账户正常啊,有什么办法解除吗
标题:GV申请,不能下号。
作者:舞舞轩轩
原帖:https://hostloc.com/thread-937638-1-1.html
摘要:小白第一次申请
实体卡接到验证码了,输入进去跳转说绑定了接码的手机号,后面就自动刷新了。然还还提示我去选号。为什么下不来号呀?
作者:舞舞轩轩
原帖:https://hostloc.com/thread-937638-1-1.html
摘要:小白第一次申请
实体卡接到验证码了,输入进去跳转说绑定了接码的手机号,后面就自动刷新了。然还还提示我去选号。为什么下不来号呀?
标题:出两vir
作者:ilpl
原帖:https://hostloc.com/thread-937637-1-1.html
摘要:$11.88 /年 (95出)
惊人折扣,快抢!
VIRTUALIZATION KVM – 1 GIGABIT
RAM 3456MB 内存
CPU 2 核心
HDD 50GB 固态硬盘 (RAID 10)
BANDWIDTH 5000GB 流量
LOCATION 水牛城 机房
IPs 1 独享 IPv4
$4.95 /年(45出)
绝对超值!
VIRTUALIZATION KVM – 1 GIGABIT
RAM 1024MB 内存
CPU 1 核心
HDD 15GB 固态硬盘 (RAID 10)
BANDWIDTH 670GB 流量
LOCATION 洛杉矶 机房
IPs 1 独享 IPv4
联系
QQ:1405050005
tg:chromeapk
作者:ilpl
原帖:https://hostloc.com/thread-937637-1-1.html
摘要:$11.88 /年 (95出)
惊人折扣,快抢!
VIRTUALIZATION KVM – 1 GIGABIT
RAM 3456MB 内存
CPU 2 核心
HDD 50GB 固态硬盘 (RAID 10)
BANDWIDTH 5000GB 流量
LOCATION 水牛城 机房
IPs 1 独享 IPv4
$4.95 /年(45出)
绝对超值!
VIRTUALIZATION KVM – 1 GIGABIT
RAM 1024MB 内存
CPU 1 核心
HDD 15GB 固态硬盘 (RAID 10)
BANDWIDTH 670GB 流量
LOCATION 洛杉矶 机房
IPs 1 独享 IPv4
联系
QQ:1405050005
tg:chromeapk
标题:收一个5年以上的Dndpod专业版
作者:DeKvin
原帖:https://hostloc.com/thread-937642-1-1.html
摘要:转移教程: https://hostloc.com/thread-918726-1-1.html
价格: 80元(这个价应该能收到吧,不够可以再谈谈)
交易方式: 走闲鱼 转移我后立即确认收货 若loc账号有良好的交易历史可以先款
TG: @Heluxiaofu
作者:DeKvin
原帖:https://hostloc.com/thread-937642-1-1.html
摘要:转移教程: https://hostloc.com/thread-918726-1-1.html
价格: 80元(这个价应该能收到吧,不够可以再谈谈)
交易方式: 走闲鱼 转移我后立即确认收货 若loc账号有良好的交易历史可以先款
TG: @Heluxiaofu
标题:修改pt种子,hash值也跟着变化, 会影响到考核或封号吗
作者:改过自新
原帖:https://hostloc.com/thread-937640-1-1.html
摘要:在原来的种子里面修改了文件名, 新的种子hash值也跟着修改而产生了变化. 那么请问一下, 我在下载和上传 新的hash和pt站的不一样了, 会被考核或封号吗
作者:改过自新
原帖:https://hostloc.com/thread-937640-1-1.html
摘要:在原来的种子里面修改了文件名, 新的种子hash值也跟着修改而产生了变化. 那么请问一下, 我在下载和上传 新的hash和pt站的不一样了, 会被考核或封号吗
标题:a1全局被封看人品哈,我的偷渡a1,2年多了没被封
作者:lonelyer
原帖:https://hostloc.com/thread-937639-1-1.html
摘要:a1全局sp0 被封看人品哈,我的偷渡a1,2年多了没被封,我的没吃灰,都是正常用了,感觉只有吃灰的才会被封。
作者:lonelyer
原帖:https://hostloc.com/thread-937639-1-1.html
摘要:a1全局sp0 被封看人品哈,我的偷渡a1,2年多了没被封,我的没吃灰,都是正常用了,感觉只有吃灰的才会被封。
标题:netfront 这几天都在打折PING.PE一片红
作者:kucn
原帖:https://hostloc.com/thread-937644-1-1.html
摘要:netfront 这几天都在打折PING.PE一片红,不知道能不能用,就是宽带大硬盘大。。
作者:kucn
原帖:https://hostloc.com/thread-937644-1-1.html
摘要:netfront 这几天都在打折PING.PE一片红,不知道能不能用,就是宽带大硬盘大。。
标题:各位大佬,我参考:KIMSUFI使用proxmox开【IPv4nat+IPv6】小鸡,...
作者:forward_99
原帖:https://hostloc.com/thread-937643-1-1.html
摘要:各位大佬,我参考:KIMSUFI使用proxmox开【IPv4nat+IPv6】小鸡 教程,我是在Kimsufi后台面板通过执行Reinstall来执行安装 proxmox【PVE】系统,安装完之后,使用命令 vi /etc/network/interfaces修改文件 /etc/network/interfaces,把教程里面内容追加到该文件末尾,但是在保存并退出后执行 /etc/init.d/networking restart 指令,这个时候就会报错:
[....] Restarting networking (via systemctl): networking.serviceJob for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details. failed! root@nsXXXX:~# systemctl status networking.service ● networking.service - Raise network interfaces Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2021-12-12 04:10:31 UTC; 13s ago Docs: man:interfaces(5) Process: 19137 ExecStart=/sbin/ifup -a --read-environment (code=exited, status=1/FAILURE) Main PID: 19137 (code=exited, status=1/FAILURE) Dec 12 04:10:31 nsXXXX systemd[1]: Starting Raise network interfaces... Dec 12 04:10:31 nsXXXX ifup[19137]: Waiting for vmbr1 to get ready (MAXWAIT is 2 seconds). Dec 12 04:10:31 nsXXXX ifup[19137]: RTNETLINK answers: File exists Dec 12 04:10:31 nsXXXX ifup[19137]: ifup: failed to bring up vmbr1 Dec 12 04:10:31 nsXXXX systemd[1]: networking.service: Main process exited, code=exited, status=1/FAILURE Dec 12 04:10:31 nsXXXX systemd[1]: networking.service: Failed with result 'exit-code'. Dec 12 04:10:31 nsXXXX systemd[1]: Failed to start Raise network interfaces.复制代码
这种是要怎么解决的?我之前安装了debian11系统,在里面通过 ip -6 a 查看了我的机器的ipv6地址:为inet6 2001:41d0:1XXX:2XXX::1/56 scope global复制代码
然后我把原来博客里面的 2001:41d0:2:cf5a 替换成 2001:41d0:1XXX:cf5a,这样再去执行: /etc/init.d/networking restart 指令也是会报错。。
有大佬可以帮忙看下怎么解决这问题吗?谢谢。
作者:forward_99
原帖:https://hostloc.com/thread-937643-1-1.html
摘要:各位大佬,我参考:KIMSUFI使用proxmox开【IPv4nat+IPv6】小鸡 教程,我是在Kimsufi后台面板通过执行Reinstall来执行安装 proxmox【PVE】系统,安装完之后,使用命令 vi /etc/network/interfaces修改文件 /etc/network/interfaces,把教程里面内容追加到该文件末尾,但是在保存并退出后执行 /etc/init.d/networking restart 指令,这个时候就会报错:
[....] Restarting networking (via systemctl): networking.serviceJob for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details. failed! root@nsXXXX:~# systemctl status networking.service ● networking.service - Raise network interfaces Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2021-12-12 04:10:31 UTC; 13s ago Docs: man:interfaces(5) Process: 19137 ExecStart=/sbin/ifup -a --read-environment (code=exited, status=1/FAILURE) Main PID: 19137 (code=exited, status=1/FAILURE) Dec 12 04:10:31 nsXXXX systemd[1]: Starting Raise network interfaces... Dec 12 04:10:31 nsXXXX ifup[19137]: Waiting for vmbr1 to get ready (MAXWAIT is 2 seconds). Dec 12 04:10:31 nsXXXX ifup[19137]: RTNETLINK answers: File exists Dec 12 04:10:31 nsXXXX ifup[19137]: ifup: failed to bring up vmbr1 Dec 12 04:10:31 nsXXXX systemd[1]: networking.service: Main process exited, code=exited, status=1/FAILURE Dec 12 04:10:31 nsXXXX systemd[1]: networking.service: Failed with result 'exit-code'. Dec 12 04:10:31 nsXXXX systemd[1]: Failed to start Raise network interfaces.复制代码
这种是要怎么解决的?我之前安装了debian11系统,在里面通过 ip -6 a 查看了我的机器的ipv6地址:为inet6 2001:41d0:1XXX:2XXX::1/56 scope global复制代码
然后我把原来博客里面的 2001:41d0:2:cf5a 替换成 2001:41d0:1XXX:cf5a,这样再去执行: /etc/init.d/networking restart 指令也是会报错。。
有大佬可以帮忙看下怎么解决这问题吗?谢谢。
标题:收个kurun1.5
作者:xwnlearn.cn
原帖:https://hostloc.com/thread-937646-1-1.html
摘要:rt
tg:https://t.me/xwnlearn_bot
作者:xwnlearn.cn
原帖:https://hostloc.com/thread-937646-1-1.html
摘要:rt
tg:https://t.me/xwnlearn_bot
标题:sys开一些小鸡有人需要吗
作者:渣渣灰
原帖:https://hostloc.com/thread-937645-1-1.html
摘要:开一下小鸡平摊下费用有人需要吗
宿主机是D1540 16h 32g 4x4TB
作者:渣渣灰
原帖:https://hostloc.com/thread-937645-1-1.html
摘要:开一下小鸡平摊下费用有人需要吗
宿主机是D1540 16h 32g 4x4TB
标题:vir这种垃圾机器,剑皇新思路,嘿嘿
作者:专业黑人抬棺
原帖:https://hostloc.com/thread-937648-1-1.html
摘要:vir这种垃圾机器,剑皇新思路,嘿嘿
https://github.com/maintell/webBenchmark
垃圾机器用这种多线程,居然命令启动不了
换了个思路
只需要 不断的下载 ,然后删除,在继续下载不就行了
wget 命令不就能完成么
wget --delete-after time 100 https://all-live.secure2storeapple.btrongqi.com/20211210/%E6%9F%91%E6%A9%98%E3%90%85%E7%9B%B4%E6%92%AD_217120.apk复制代码
用这个代码,成功了
哈哈哈
命令解释
delete-after 代表下载后删除 time 1000 代表重复下载一千次
这下在垃圾的机器也能剑皇了
作者:专业黑人抬棺
原帖:https://hostloc.com/thread-937648-1-1.html
摘要:vir这种垃圾机器,剑皇新思路,嘿嘿
https://github.com/maintell/webBenchmark
垃圾机器用这种多线程,居然命令启动不了
换了个思路
只需要 不断的下载 ,然后删除,在继续下载不就行了
wget 命令不就能完成么
wget --delete-after time 100 https://all-live.secure2storeapple.btrongqi.com/20211210/%E6%9F%91%E6%A9%98%E3%90%85%E7%9B%B4%E6%92%AD_217120.apk复制代码
用这个代码,成功了
哈哈哈
命令解释
delete-after 代表下载后删除 time 1000 代表重复下载一千次
这下在垃圾的机器也能剑皇了
标题:甲骨文vnc连不上
作者:giegay
原帖:https://hostloc.com/thread-937649-1-1.html
摘要:按照这个帖子来的 https://51.ruyo.net/16216.html 唯一的不同是我的电脑本身就是linux ,
Screenshot_20211212_130826.png (21.36 KB, 下载次数: 0)
下载附件
3 分钟前 上传
求大佬解答
作者:giegay
原帖:https://hostloc.com/thread-937649-1-1.html
摘要:按照这个帖子来的 https://51.ruyo.net/16216.html 唯一的不同是我的电脑本身就是linux ,
Screenshot_20211212_130826.png (21.36 KB, 下载次数: 0)
下载附件
3 分钟前 上传
求大佬解答
标题:溢价1000出个斯巴达36刀
作者:kiy
原帖:https://hostloc.com/thread-937652-1-1.html
摘要:溢价1000出个斯巴达36刀
要的PM!
小鸡全部出完了。就剩斯巴达了!
作者:kiy
原帖:https://hostloc.com/thread-937652-1-1.html
摘要:溢价1000出个斯巴达36刀
要的PM!
小鸡全部出完了。就剩斯巴达了!
标题:水墨云有跑路迹象
作者:菠菜
原帖:https://hostloc.com/thread-937650-1-1.html
摘要:https://www.inkisp.com/cart.php?gid=56
推出优惠力度离谱的3年付套餐,和布丁跑路前行为相似,建议谨慎购买
作者:菠菜
原帖:https://hostloc.com/thread-937650-1-1.html
摘要:https://www.inkisp.com/cart.php?gid=56
推出优惠力度离谱的3年付套餐,和布丁跑路前行为相似,建议谨慎购买
标题:还有人在用无忧吗
作者:rkidc
原帖:https://hostloc.com/thread-937654-1-1.html
摘要:15块钱一个月,小贵哦 有什么优势不,哪里还有长期的性价比国内小鸡吗
作者:rkidc
原帖:https://hostloc.com/thread-937654-1-1.html
摘要:15块钱一个月,小贵哦 有什么优势不,哪里还有长期的性价比国内小鸡吗
标题:30出deepvm的11.11
作者:crystalstudio
原帖:https://hostloc.com/thread-937653-1-1.html
摘要:双12补货款
斯巴达上游 AS4837线路 1Gbps
可PUSH出
有意pm
作者:crystalstudio
原帖:https://hostloc.com/thread-937653-1-1.html
摘要:双12补货款
斯巴达上游 AS4837线路 1Gbps
可PUSH出
有意pm
标题:还好我所有a1都没事
作者:NEET姬
原帖:https://hostloc.com/thread-937655-1-1.html
摘要:一个两年多带tga的a1
2个偷渡a1
1个偷渡a1p
全没出事
现在还在查吗 是不是躲过这波风头了
作者:NEET姬
原帖:https://hostloc.com/thread-937655-1-1.html
摘要:一个两年多带tga的a1
2个偷渡a1
1个偷渡a1p
全没出事
现在还在查吗 是不是躲过这波风头了