API- Ace Petroleum Engineering
Which of the statement is true about Pneumatic drilling fluids
Key to this-A, B, C, D
EXPLAINATION::
Pneumatic fluids are like air, gas or foam type
Because of their low density they impart low pressure to formation, loss circulation problem is usually very low.
Air, being less reactive to reservoir fluid or formation, formation damage is also very low.
Fire occurs when Fuel+O2+ spark source
Corrosion occurs when, electrolyte+O2+metal present in the system.
In both of the above cases O2 or oxidation type environment may be generated because of air used as pneumatic drilling mud.
Fire will be created if reservoir gases as a kick within explosive limit comes in contact with O2in presence of spark.
Corrosion may also happen because of producing reservoir water reaction with metallic tubing/equipment in presence of O2 from pneumatic drilling mud.
Hope u understood.๐ค
EXPLAINATION::
Pneumatic fluids are like air, gas or foam type
Because of their low density they impart low pressure to formation, loss circulation problem is usually very low.
Air, being less reactive to reservoir fluid or formation, formation damage is also very low.
Fire occurs when Fuel+O2+ spark source
Corrosion occurs when, electrolyte+O2+metal present in the system.
In both of the above cases O2 or oxidation type environment may be generated because of air used as pneumatic drilling mud.
Fire will be created if reservoir gases as a kick within explosive limit comes in contact with O2in presence of spark.
Corrosion may also happen because of producing reservoir water reaction with metallic tubing/equipment in presence of O2 from pneumatic drilling mud.
Hope u understood.๐ค
Cooking of Organic Matter. "This is how I transform to fuel the Humanity. It takes time and extraordinary environment to get results".- Black Gold ๐ค๐ข๐ธ #KITCHEN
#Transformation
#Transformation
At a dam site, a bed of sandstone is exposed on horizontal ground. If it is 25ยฐ towards East. Its width of outcrop on a level ground is 240 m, what is its vertical thickness?
Anonymous Quiz
33%
a) 101.9 m
16%
b) 99.9 m
41%
c) 111.9 m
11%
d) 121.9 m
๐โHow to overcome the foamy crude phenomenon inside Seperatorsโ
๐There are many ways to overcome this phenomenon in oil and gas separators, such as installing Defoaming Plates which are inclines parallel plates which are to close to each other, when foamy crude flows through these plates, oil droplets are collected when hitting these plates and the gas is liberated. Provide additional surface area, which breaks up the foam and allows the foam to collapse into the liquid layer but some resources say that Installation of defoaming plates to combat foam is normally not effective and may even be counterproductive. โฆ๏ธFoaming in the vessel is minimized by decreasing the downward liquid velocity, for instance by increasing the diameter of the separator vessel. We can also use foam depressants or defoamers, these chemicals are rather expensive, we can also reduce or break foam by other means such as heat or centrifugal force.
๐There are many ways to overcome this phenomenon in oil and gas separators, such as installing Defoaming Plates which are inclines parallel plates which are to close to each other, when foamy crude flows through these plates, oil droplets are collected when hitting these plates and the gas is liberated. Provide additional surface area, which breaks up the foam and allows the foam to collapse into the liquid layer but some resources say that Installation of defoaming plates to combat foam is normally not effective and may even be counterproductive. โฆ๏ธFoaming in the vessel is minimized by decreasing the downward liquid velocity, for instance by increasing the diameter of the separator vessel. We can also use foam depressants or defoamers, these chemicals are rather expensive, we can also reduce or break foam by other means such as heat or centrifugal force.
__________ is a line that connects points of
equal true thickness
equal true thickness
Anonymous Quiz
24%
isochore
13%
isochrone
11%
isobath
51%
isopach
Neat cement is the one having the density of
Anonymous Quiz
29%
9 ppg
35%
12 ppg
24%
16 ppg
11%
25 ppg
Primary Cementing- Major components #DrillingTechnology
What is the use of whipstock?
Anonymous Poll
16%
a) Maintain the deviation angle
12%
b) Create window hole in the casing for sidetracking
7%
c) Plug the main hole for sidetracking
64%
d) All of the above
OWC usually have lower content.
Anonymous Poll
25%
a) Tricalcium aluminate
45%
b) Tricalcium silicate
18%
c) Dicalcium silicate
12%
d) None of the above
Long teeth bits are used to drill
#DrillingTechnology
#DrillingTechnology
Anonymous Poll
27%
a) Hard rocks
6%
b) Medium rocks
65%
c) Soft rocks
2%
d) None of the above
๐ โช๏ธ๐ขOn the 74th Freedom day Week, We are announcing
"ACE FREEDOM WEEK DEAL". a discount offer of
๐ฎ๐ณ20% on purchase of RMS and
๐ฎ๐ณ25% on (RMS+BEP)
Deal will expire on 21st Aug 2020.
To avail discount voucher, contact me below. Or mail ๐
apigateinpetroleum@gmail.com
๐ฎ๐ณ๐ฎ๐ณ
"ACE FREEDOM WEEK DEAL". a discount offer of
๐ฎ๐ณ20% on purchase of RMS and
๐ฎ๐ณ25% on (RMS+BEP)
Deal will expire on 21st Aug 2020.
To avail discount voucher, contact me below. Or mail ๐
apigateinpetroleum@gmail.com
๐ฎ๐ณ๐ฎ๐ณ
Mud Cake thickness is calculated by
Anonymous Quiz
63%
Caliper Log
10%
Resistivity log
9%
SP log
19%
Mud log
Formation permeability can be calculated by
Anonymous Quiz
14%
Neutron
13%
Gamma gamma
54%
NMR
19%
SP Log