API- Ace Petroleum Engineering
2.54K subscribers
671 photos
5 videos
161 files
550 links
Initiative by IITians & Experts to guide aspirants for Petroleum Eng. CBT, GATE, SPE, PSUs..etc. & Interviews👔🎯

Website:- gateaceinpetroleumots.conductexam.com/
📩 apigateinpetroleum@gmail.com
❤️FB-Apiace

Est.Dt: 3-07-2019
Download Telegram
In _______, gases liberated from
oil are kept in intimate contact with liquid phase and thermodynamic equilibrium is established between the two phases and separation take place at the required pressure.
Anonymous Poll
67%
Flash separation
25%
Differential separation
5%
Both
3%
None
How many stages are required for differential separation?
a) 2-4 stages b) 20-40 stages c) 40-50 stages d) Too many stages
Anonymous Poll
71%
A
22%
B
4%
C
3%
D
Which of the following method is used for heavy crude oil and bitumen transportation via pipeline?
a) Viscosity reduction method b) In Situ upgrading method c) Both (a) and (b) d) All of the above
Anonymous Poll
33%
A
9%
B
36%
C
21%
D
Which of the following evaporative emission is associated with rail tank cars, tank trucks and marine vessels?
a) Bulk fuel drop losses b) Underground storage breathing loss c) Transit lossd) None of the above
Anonymous Poll
23%
A
25%
B
47%
C
5%
D
Which of the following flow meter is based on Bernoulli’s Theorem?
a) Orifice meter b) Coriolis flow meter c) Sonic flow meter d) None of the above
Anonymous Poll
85%
A
8%
B
3%
C
4%
D
The API gravity of water at 60°F is?
a) 6 b) 10 c) 15 d) 1.0
Anonymous Poll
4%
A
64%
B
5%
C
27%
D
Which of the following tank can
be used for liquid petroleum gas?
a) Fixed roof tank b) Floating roof tanks c) Bullet tanks d) None of the above
Anonymous Poll
27%
A
39%
B
27%
C
6%
D
_______ are used to store the products having very high vapour pressure
a) Spherical Tanks b) Fixed roof tanks c) Floating roof tanks d) None of the abov
Anonymous Poll
45%
A
15%
B
37%
C
3%
D
Class II hydrocarbons are those liquid crude oil derivatives which have _______
a) Flash point below 21oC b) Flash point from 21oC to 55oC c) Flash point above 55oC d) None of the above
Anonymous Poll
17%
A
72%
B
8%
C
3%
D
A sample taken at a specific location in a tank is called_____
a) An official sample b) A tank-side sample c) A spot sample d) A single-tank composite
Anonymous Poll
7%
A
25%
B
61%
C
7%
D
Total Calculated Volume (TCV) is_____
a) GSV plus free water b) NSV plus free water. c) GSV less sediment and water d) NSV plus sediment and water
Anonymous Poll
32%
A
21%
B
20%
C
27%
D
The advantage of using a 1-2 shell and tube heat exchanger over a 1-1 shell and tube heat exchanger is
Anonymous Poll
8%
Lower tube side pressure drop
13%
Lower shell side pressure drop
64%
Higher tube side heat transfer coefficient
16%
Higher shell side heat transfer coefficient
That is it in production engineering.
U hv to study many book for this subject. I understand that. But dont go into deep Or into correlations of any topic. Just basic fundamental of each topics will b asked in GATE.
Best of luck 👍

U can ask ur doubts in group chat.
This media is not supported in your browser
VIEW IN TELEGRAM
🔴OFFSHORE DRILLING AND PRODUCTION for GATE🔴
—------------------------------------------------------------------------------—


1- Sukumar Laik's Book
2- Subrata K. Chakrabati handbook
3- Offshore drilling,completion,ETA seminar
👇🏻
#News👇
These are IIT-ISM Prof Sukumar Laik's class notes... Start offshore from here and if u stuck in some concept and something is not clear in pics, refer to his book pdf that was uploaded earlier here.