Which of the following is most suitable for a low pressure reservoir with unconsolidated heavy oil sand?
a) Open hole completion
b) Perforated casing completion c) Uncemented liner completion d) None of the above

Which type of multilateral well completion has cased and cemented main well while the secondary wells have an openhole completion? a) Level 1 b) Level 2 c) Level 3

________ is used to connect flanges of different working pressure a) Crossover flange b) Adapter c) Tool joint d) None of the above

The liner geometry of Big hole shape charge is
a) Conical b) Parabolic c) Square d) None of the above

Which of the following acid is used in the main flush of matrix acidizing for carbonates
a) HCl b) 3wt%HFand 12wt%HCl c) H2SO4

Subsurface chokes are usually sized for_____ flow
a) Sub-critical b) Critical c) Both of these d) None of the above

Tubing elongation most likely occurs with:
a) Ballooning b) Buckling c) Reverse Ballooning d) Temperature Reduction

The control pressure for a surface safety valve is most likely equal to:
a) Valve body pressure divided by actuator ratio b) Actuator ratio divided by valve body pressure c) Two times valve body pressure divided by actuator ratio

Which of the following is not a component of IPR?
a) Reservoir pressure b) Perforation radius c) Completion thickness d) Fluid density

Which parameter has no effect on the inflow performance of a reservoir?
a) Formation permeability b) Perforation skin c) Production tubing diameter d) Reservoir boundary condition