API- Ace Petroleum Engineering
2.54K subscribers
671 photos
5 videos
161 files
551 links
Initiative by IITians & Experts to guide aspirants for Petroleum Eng. CBT, GATE, SPE, PSUs..etc. & Interviews👔🎯

Website:- gateaceinpetroleumots.conductexam.com/
📩 apigateinpetroleum@gmail.com
❤️FB-Apiace

Est.Dt: 3-07-2019
Download Telegram
The bulk density of a brine saturated core sample is 1.9 gm/c. If the density of brine solution and core matrix are 1.04 gm/cc and 2.55 gm/cc, the porosity of the formation will be:
Anonymous Poll
13%
36.5
22%
28.5
14%
24.5
51%
None
Reservoir ques👇
#ReferenceBookMahto
Absolute k with oil and water is 100mD. If the relative permeability to water is 0.40, the effective permeability to oil is
Anonymous Poll
51%
60
47%
40
2%
50
Reservoir begins to fill up with oil is termed as
Anonymous Poll
68%
a) Drainage
32%
b) Imbibition
The relationship characteristic of the displacement of the wetting phase from residual saturation to irreducible saturation is called
Anonymous Poll
31%
a) Primary Drainage Curve
27%
b) Imbibition Curve
42%
c) Secondary Drainage Curve
Which of the following statement is true?

a) The non-wetting phase occupies the Larger pore spaces where flow occurs with the least difficulty b) The non-wetting phase flows at the relatively lower saturation (Soc = 17%) than wetting phase (Swc= 20%).
Anonymous Poll
54%
A
12%
B
4%
None
30%
Both
If the pressure in water is greater, the rock is____
a) oil wet
b) Neutrally wet c) water-wet
Anonymous Poll
50%
A
5%
B
45%
C
Volatile oils are characterized by:

a) Gravities > 45oAPI b) Formation factor > 2 c) High solution gas ratios d) All of the above
Anonymous Poll
21%
A
3%
B
4%
C
72%
D
Using the following parameters, what is the ratio of the gas cap to the oil rim, m? Area = 80 acres,
net pay thickness = 50 ft
average porosity = 20%,initial water saturation, Swc = 10%, Sg = 10%, Boi = 1.42rb/stb, Bgi = 0.8 rb/mscf.
Anonymous Poll
59%
a) 0.125
27%
b) 0.22
14%
c) 0.5
Which of the following is incompressible fluid?
a) Dead oil
b) Live oil c) Gas
Anonymous Poll
79%
A
13%
B
7%
C
For volatile oils, which sampling
method is preferred?
a) Subsurface sampling b) Wellhead sampling c) Surface separator sampling d) None of the above
Anonymous Poll
58%
A
13%
B
27%
C
2%
D