Explained !

🖥 Roll bar in suspension ( 6/9 )

⚙ "There is a rod that has two ends and is part of the suspension system, and it only comes into play during cornering, not during braking or acceleration. When pressure is applied to one side, it transfers the load to the opposite side, and the anti-roll bar helps balance these forces, which is a separate and very detailed topic.

⚠️ "Briefly, an anti-roll bar is a rod that, as its name suggests, works against the roll bar. It prevents the distribution of weight and load of the vehicle from shifting to the opposite side during cornering. For example, imagine you are running and turning to the right; you feel that the left side of your body becomes heavier. This is called weight transfer to the opposite side. The job of the anti-roll bar is to control this to some extent, keeping the chassis in a normal state(to keep car in a normal aero condition) . If it works too strongly, the anti-roll bar can cause understeer and a lack of grip."
🚫"Specifically, I was talking about high-speed turns. In low-speed turns, there is no need for a strong anti-roll bar because, as it is clear, when we turn to the right at low speed, a significant amount of weight is not transferred to the opposite side."

Please open Telegram to view this post

VIEW IN TELEGRAM

269 viewsHesam Hb, edited 19:35

Explained !

🖥 The steering system is closely packaged with front suspension. a track rod links each tire to a fairly standard hydraulic rack and pinion setup, with the steering column extending into the cockpit. ( 7/9 )

Please open Telegram to view this post

VIEW IN TELEGRAM

288 viewsHesam Hb, edited 19:40

Explained !

🖥 The rear suspension has a track rod as well for vertical tire angle adjusment. ( 8/9 )

Please open Telegram to view this post

VIEW IN TELEGRAM

315 viewsHesam Hb, edited 19:42

Explained !

🖥 all wheels must be attached to the car with wheel tethers. these are strong cables that keep wheels connected to the car in the event of an accident. ( 9/9 )

⬜️ most of the element's of the suspension of a F1 car are made from Carbon Fiber for better aero forms.

➕ Wheel tethers are often made from Kevlar fibers or similar high-strength materials due to their excellent tensile strength and lightweight properties. Kevlar is known for its durability and resistance to impact, making it an ideal choice for applications where safety and performance are critical, such as in motorsports.

✈️ Explained !

Please open Telegram to view this post

VIEW IN TELEGRAM

428 viewsHesam Hb, edited 19:45

Explained !

⭐️ لیست مفاهیم و محتواهای ارائه شده :

✔️ این لیست هر زمان که محتوای جدیدی ارائه شود آپدیت خواهد شد.

⚠️ "محتواهای ارائه شده ممکن است بعد از انتشار هم ادیت شوند به دلیل وجود نقص و ایراد و اشتباه،ر در صورت تغییر در هرکدام از محتواها تغییر اعلام خواهد شد."

🔗 Push-rod Vs Pull-rod
🔗 Rocker in suspension system
🔗 Heave damper/Spring
🔗 Downforce Vs Drag V1 / Easy to understand
🔗 Downforce Vs Drag V2 / bit more technical
🔗 Stall & Anti-Stall
🔗 Dirty air Vs Slipstream
🔗 Ground Effect
🔗 Ride height
🔗 Porpoising
🔗 ERS
🔗 Coanda effect in F1 aero
🔗 Tires in F1
🔗 Sidepods in f1 cars
🔗 Toe & Camber angle

🔗

Australia Circuit

🔗

Tesla Vs. Top gear controversy

🔗

Shanghai international circuit

🔗

Slip angle

🔗

Ackerman Steering angle

🔗

Greatest Drivers in history

🔗

Hill Vs. Schumacher 1994

🔗

Hill Vs. Schumacher 1994 ( Fa )

🔗

Race Car Aerodynamics book ( Fa )

🔗

Trail braking ( Fa )

🔗

How drivers change their setups during a race! ( Fa )

🔗

Engine braking ( Fa )

🔗

Side drafting ( Fa )
🔗 Formula 1 for beginners ( Fa ) 🔜

🔗

Ferrari SF-25 Plank wear problem ( Fa )

🔗

2026 FIA Formula 1 Sporting Regulations
🔗 2026 FIA Formula 1 Technical Regulations <To be completed>

✈️ Explained !
✈️ Explained ! bot (موقتاً غیرفعال)

Please open Telegram to view this post

VIEW IN TELEGRAM

639 viewsHesam Hb, edited 20:03

Explained !

Milliken & Milliken_Race car vehicle dynamics.pdf

83.1 MB

440 viewsHesam Hb, 20:09

Explained !

🖥 Pull-rod Vs Push-rod : Explained ! ( 1/10 )

⚠️This picture shows the design of push-rod and pull-rod suspension systems.

◻️ If you don’t have enough time to read this entire content:

🔵 push-rod suspensions offer better packaging and are easier to tune, making them ideal for handling balance, but they can slightly compromise aero efficiency due to higher placement of components. Pull-rod suspensions, on the other hand, improve aerodynamic efficiency by keeping components lower, helping reduce drag and lowering the center of gravity, but they are more challenging to set up and maintain. Both systems affect handling differently based on how they're tuned, with pull-rod often being more beneficial for rear suspensions in high-performance cars like F1 cars.

✈️ Explained !

Please open Telegram to view this post

VIEW IN TELEGRAM

387 viewsHesam Hb, edited 09:43

About

Blog

Apps

Platform