Connected Port: SPRD U2S Diag (COM27)
SROM: SPRD3
Sending payload: OK
Sending preloader: OK
Sending fdl loader: OK
Reading device Info [EROFS]
Brand: TECNO
Model: TECNO KL4
Device: TECNO-KL4
Product name: KL4-OP
Manufacturer: TECNO
Android version: 14
Android cpu: arm64-v8a
Android platform: ums9230
Incremental version: 250322V1
Security patch: 2025-02-05
Activate slot: a
Wipe persist Partition: OK
Reboot device: OK
Operation time: 00:10
Operation: Finish 6.0.5.2

✅ Improved support for Oppo/Realme/OnePlus (EDL mode) 
 
✅Added support Motorola Moto G24, Moto G24 Power, Moto G05 5G 
 
✅Added support new preloader ver for Samsung SM-A75F  
  
✅Added support Unisoc phones:  
          Realme P3 Lite 4G RMX5300 
          Realme C71 RMX5303 
          Realme Note 70T RMX5313  
          HMD Pulse TA-1589, TA-1594 
          HMD Aura TA-1631, TA-1635, TA-1637 
          Blackview Link 2, Oscal Flat 2C, Blackview Wave 9C, Blackview Active 5, Blackview BV4800 SE 
          Blackview Fort 1, Blackview Mega 2, Blackview Oscal Marine 1, Blackview Oscal Marine 2 
          Blackview Oscal Pad 100, Blackview Oscal Pad 90 Pro, Blackview Zeno 1, Blackview Mega 8 
 
✅Added support Mediatek phones: 
          Blackview Mega 3, Blackview Link 8, Blackview BL7000 
 
✅Added support Meizu QCOM phones (EDL mode) 
          Meizu 16, Meizu 16 Plus, Meizu 16th, Meizu 16s, Meizu 16s Pro 
          Meizu 18 Pro, Meizu 18s Pro, Meizu 18X 
          Meizu Note 16 Pro, Meizu 21, Meizu 17, Meizu 20 PRO, Meizu 21, Meizu 21 Note  
  
✅ Fixed some bugs  

*FIX 12.02.2026

Wait for device... 
Download port: Qualcomm HS-USB QDLoader 9008 (COM42)
Port: Qualcomm HS-USB QDLoader 9008 (COM42)
Manufacturer: Qualcomm Incorporated
Waiting for server........ OK
Connect to comport... OK
Read chip info... OK
OEM Private key: **********************************************************
Vendor: GENERIC QUALCOMM
Load loader... OK
Send Loader... OK
Ping Device... OK
Load Config... OK.... .... .... .... 
Read Build Prop Info... OK
 Brand: SAMSUNG
 Model: SM-G770F
 Product: QSSI
 Manufacturer: SAMSUNG
 Android Version: 11 (Android 11)
 Security Patch: 2024-02-01
 Build ID: RP1A.200720.012
 Build Date: MON JAN 22 16:14:38 +07 2024
 Display ID: TP1A.220624.014.G770FXXS9HXA1
 Fingerprint: SAMSUNG/*************/QSSI:13/TP1A.220624.014/G770FXXS9HXA1:USER/RELEASE-KEYS
 Base OS: SAMSUNG/*****************/R5Q:13/TP1A.220624.014/G770FXXU8HWK5:USER/RELEASE-KEYS
 Build: G770FXXS9HXA1
Read Internal Storage Info... OK
USERDATA: 109.42 GB
USERDATA: ENCRYPTED
Remove FRP Lock... OK
Reboot... OK
Elapsed Time: 7 secs, 411 msecs

Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A155F
CSC Version: A155FOXM9DZA2 [january 2026, rev2]
AP/PDA Version: A155FXXS9DZA2 [january 2026, rev2]
CP/Phone Version: A155FXXS9DZA2 [january 2026, rev2]
Serial: ***************
IMEI: ******************
IMEI2: ***********************
Product Code: SKZ
Unique Number: **********************
Android Version: 16
Network Lock Status: UNLOCK
Operation in progress. Be patient! Do NOT disconnect the phone!
Successfully finished.

Phone found.
Sending preloader...
Preloader send successfully
Reading flash memory parameters..
Setting baudrate..
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 000000000000000
SW version: E1190JVLC
Phone SN : *************
Repairing phone IMEI A ...
Phone IMEI A Repair successfully.

Start Connect SoC SC9863a1 Boot [FF] FireFly v2.48
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device... SPRD U2S Diag (COM96) 1782:4D00
boot: SPRD3
boot iLoader... Ok
run iLoader... Ok
boot xLoader... Ok
run xLoader... Ok
Bootcode Handshake... Ok [FF] v2
Loader exec[0] Ok
Selected CPU [SC9863]
get flash type... EMMC
EMMC CID:  crc Ok
  Vendor: Samsung OEM: 0x0100 ID:  [RC14MB] PRV: 0x12 Serial:  0x59844A10
  MM/YY: 6/2022
CSD: 
  temp write protect: No
  perm write protect: No
  wp group: 0x10 en 0x01
EXTCSD rev1.8 EMMC 5.1 Firmware: 12
  BOOT_CONFIG: 0x08 boot1
  BOOT_BUS_WIDTH: 0x00
  RST_N_FUNCTION: 0x01
  PART_S_COMPLETED: No
  BOOT size: 0x00400000 4.00 Mb
  RPMB size: 0x00400000 4.00 Mb
  Size Market 64 Gb; Actual 0xE8F800000 58.24 Gb
  EOL: Status: Normal: Less than 80% reserved blocks used
  EOL_A: SLC status: 0% - 10% used
  EOL_B: MLC status: 0% - 10% used
Load 1st GPT... Ok
gpt: rebuild mbr
1st GPT Ok
Connected
 
Partitions: 69
Slot info... slot: b
get sw info...
Probe boot... vendor_boot_b v4 lz4 ramdisk.size=68.18 Mb; found 2 props boot_b v4 ramsidk.size=0; Ok 19 sec
super OTA updated
Probe vbmeta... End 15 us
  Product Brand: ajib
  Product Device: ajib_i10
  Product Model: ajib i10
  Product Name: ajib_i10
  Patch Level: UP1A.231005.007
  Display ID: AG_ajib_i10.HD.0610_1027.V04
  SW Version: 1749522412
  Ver. CodeName: REL
  Sec. Patch: 2025-05-05
  Build Time: 10.06.2025 2:26:52
  Product Info: ajib_i10
  Product Manfct: ajib
  Board Platform: sp9863a
  Product Board: pri_board
ID: ajib-i10-pri-board
Strategy [none|generic]
Firmware ID: SP9863A_ajib_ajib_i10_OSv14_AG_ajib_i10.HD.0610_1027.V04_UP1A.231005.007_ajib_i10_wota
OTA update
Android ver: 14
userdata: [f2fs] FBE [file based encryption] cache: [f2fs]
Backup(16) to C:\InfinityBox\CM2SP3\backup\SC9863_ajib-i10-pri-board\
Read...
#1/69 [prodnv] 64.00 Mb Ok [64.00 Mb] 34 sec
#2/69 [miscdata] 1024.00 Kb Ok [1024.00 Kb] 547 us
#4/69 [trustos_a] 6.00 Mb Ok [6.00 Mb] 3 sec
#5/69 [trustos_b] 6.00 Mb Ok [6.00 Mb] 3 sec
#6/69 [sml_a] 1024.00 Kb Ok [1024.00 Kb] 547 us
#7/69 [sml_b] 1024.00 Kb Ok [1024.00 Kb] 532 us
#8/69 [uboot_a] 3.00 Mb Ok [3.00 Mb] 1 sec
#9/69 [uboot_b] 3.00 Mb Ok [3.00 Mb] 1 sec
#13/69 [l_fixnv1_a] 2.00 Mb Ok [2.00 Mb] 1 sec
#14/69 [l_fixnv2_a] 2.00 Mb Ok [2.00 Mb] 1 sec
#15/69 [l_fixnv1_b] 2.00 Mb Ok [2.00 Mb] 1 sec
#16/69 [l_fixnv2_b] 2.00 Mb Ok [2.00 Mb] 1 sec
#30/69 [teecfg_a] 1024.00 Kb Ok [1024.00 Kb] 547 us
#31/69 [teecfg_b] 1024.00 Kb Ok [1024.00 Kb] 532 us
#68/69 [splloader] 4.00 Mb Ok [4.00 Mb] 2 sec
#69/69 [splloader_bak] 4.00 Mb Ok [4.00 Mb] 2 sec
Saved 16 of 16 [103.00 Mb] to C:\InfinityBox\CM2SP3\backup\SC9863__ajib-i10-pri-board\
Probe bootloader...
key mask=0, ver mask=1, key auto=a
Bootloader locked, oem|U
Stop [Job 44038455] Connect v2.48 1 min 44 sec
Set [Probe secondary gpt] On to load and verify 2nd GPT copy. Disable it if process stop/freez

Start Reset | Format SoC SC9863a1 Boot [FF] FireFly v2.48
Reset/Format? Yes
Backup exist C:\InfinityBox\CM2SP3\backup\SC9863_ajib-i10-pri-board.7z
Process Wipe...
#1... Ok
#2... End
Reset Userdata... User Wipe Auto => User Format
#1 userdata... Wiped Ok
#2 cache... Wiped Ok
#3 metadata... Wiped Ok Done(3)
Stop [Job 44038455] Reset | Format v2.48 8 sec
In case of recovery loop make Reset Userdata with [User Make filesystem]

Start FRP Complete. Erase Userdata SoC SC9863a1 Boot [FF] FireFly v2.48
Partitions: 69
Backup exist C:\InfinityBox\CM2SP3\backup\SC9863_ajib-i10-pri-board.7z
Reset FRP... frp config found
wipe persist... Ok 31 us
Completed(1)
Reset Userdata... User Wipe Auto => User Format
#1 userdata... Wiped Ok
#2 cache... Wiped Ok
#3 metadata... Wiped Ok Done(3)
Stop [Job 44038455] FRP Complete. Erase Userdata v2.48 7 sec
In case of recovery loop make Reset Userdata with [User Make filesystem]
Reboot... Disconnect cable if it freez
Bye