In between cutoff and saturation along
the load line is the active region of the
transistor’s operation
the load line is the active region of the
transistor’s operation
Anonymous Quiz
95%
T
5%
F
At ... , BCJ becomes Fwd-biased
and there is no more increase for IC
and there is no more increase for IC
Anonymous Quiz
18%
cutoff
71%
saturation
11%
active
من الاسئلة اللي فاتت هنلاحظ ان
cut off => IC = 0 VCE = VCC- IC RC
saturation => IC = IC(sat) VCE = VCE(sat)
cut off => IC = 0 VCE = VCC
At saturation , BCJ becomes ...-biased
and there is no more increase for IC
and there is no more increase for IC
Anonymous Quiz
83%
Forward
17%
Reverse
القوانين اللي استخدمناها المسالة اللي فاتت
IC(sat) = (VCC - VCE(sat)) / RC
IB = (VBB - VBE) / RB
IC = IB β
VCE(sat) = VCE
لاحظ اول قانونين هتلاقيهم زي بعض الفرق اني ببدل الC بالB ويطلعلي القانون التاني
IC > IC(sat) => saturated
IC(sat) = (VCC - VCE(sat)) / RC
IB = (VBB - VBE) / RB
IC = IB β
VCE(sat) = VCE
لاحظ اول قانونين هتلاقيهم زي بعض الفرق اني ببدل الC بالB ويطلعلي القانون التاني
IC > IC(sat) => saturated
It is the region along the load line
including all points between
saturation and cutoff.
including all points between
saturation and cutoff.
Anonymous Quiz
8%
cutoff
11%
saturation
81%
active
The BJT is normally operated in linear
region to act as .....
region to act as .....
Anonymous Quiz
77%
amplifier
23%
switch
ways of Configurations Of BJT
Anonymous Quiz
2%
DC Fixed-biasing
2%
Emitter-stabilized Bias Circuit
3%
DC Collector Feedback biasing
3%
Voltage-divider biasing
90%
All of the above
In a simple biasing circuit(Fixed-bias ), ... is eliminated by connecting the
resistor RB to the supply ...
resistor RB to the supply ...
Anonymous Quiz
43%
VCC - VBB
57%
VBB - VCC