I’ve started refactoring of Partial close (because it consumes a lot of resources).
The first step was to separate it from the EA into a standalone module, and that was done.
You may notice a slight difference in the results if you use the “Close any with any” mode — CP 2.60 checked Partial close conditions before checking individual series signals, while now the EA checks them after.
In the first image, CP v2.60 closed 2 trades on Partial close and continued to manage the selling series until it closed on the opposite signal the next day. And in the second image, you can see how CP v2.60.3 closed the entire series on the first day (because it had enough profit and had a closing signal).
This change should not affect your results much. If it does happen, please PM me your settings and I will check and try to resolve the issue.
The first step was to separate it from the EA into a standalone module, and that was done.
You may notice a slight difference in the results if you use the “Close any with any” mode — CP 2.60 checked Partial close conditions before checking individual series signals, while now the EA checks them after.
In the first image, CP v2.60 closed 2 trades on Partial close and continued to manage the selling series until it closed on the opposite signal the next day. And in the second image, you can see how CP v2.60.3 closed the entire series on the first day (because it had enough profit and had a closing signal).
This change should not affect your results much. If it does happen, please PM me your settings and I will check and try to resolve the issue.
👍4🔥3🥰1
💪 CommunityPower EA v2.60.3 is here!
2024.09.15 (2.60.1):
[+] Spread: Apply to close
[*] Lot: Risk per trade mode takes into account Individual StopLoss first, and only if it is disabled, the series StopLoss is used
2024.09.30 (2.60.2):
[+] News: Consider weekend
2024.10.03 (2.60.3):
[*] PartialClose refactored
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
2024.09.15 (2.60.1):
[+] Spread: Apply to close
[*] Lot: Risk per trade mode takes into account Individual StopLoss first, and only if it is disabled, the series StopLoss is used
2024.09.30 (2.60.2):
[+] News: Consider weekend
2024.10.03 (2.60.3):
[*] PartialClose refactored
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
https://communitypowerea.com
Signals and filters
Parameters of all Signals and filters
21🔥6❤2👍1
👍4❤3🐳2
💪 CommunityPower EA v2.60.4
I'm continuing to refactor the EA to finally make it multi-symbol, and this is the next step in that journey.
Please check your favorite set files with this beta to make sure everything continues to work fine. The results should not differ from 2.60.3 (but may differ slightly from 2.60 if you use PartialClose Any with Any).
2024.10.10 (2.60.4):
[*] ActivePeriods and CollectiveSignal refactored
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
I'm continuing to refactor the EA to finally make it multi-symbol, and this is the next step in that journey.
Please check your favorite set files with this beta to make sure everything continues to work fine. The results should not differ from 2.60.3 (but may differ slightly from 2.60 if you use PartialClose Any with Any).
2024.10.10 (2.60.4):
[*] ActivePeriods and CollectiveSignal refactored
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
Communitypowerea
Multi-set (multi-currency as well) version of EA / CommunityPower EA / CommunityPower EA
It is global improvement that will allow to run (and test) multiple instances of CP EA on the single chart.All settings are hidden, you specify only folder cont
👍5🔥4👏2🐳2
👍4🐳3
Now a 12.5 months test of a really heavy strategy with 13.4k trades takes 00:21:42 instead of 00:42:04 for v2.60 (1.93 times faster). And a 6.5 months (7k trades) test is 2.04 times faster (00:06:05 instead of 00:10:22)!
Backtesting and optimization in general is also slightly sped up.
Please check your set files so I can fix any bugs we find before release.
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
Please open Telegram to view this post
VIEW IN TELEGRAM
Telegram
Andrey Khatimlianskyi in CommunityPower EA
Thanks for the details, I’ve checked it.
Test for 6.5 months takes 00:07:50 (1 min 12 sec per month)
12.5 months (13.6k trades) — 00:35:55 (2 min 52 sec per month)
18.5 months (20k trades) — 01:05:25 (3 min 32 sec per month)
The most consuming part of the…
Test for 6.5 months takes 00:07:50 (1 min 12 sec per month)
12.5 months (13.6k trades) — 00:35:55 (2 min 52 sec per month)
18.5 months (20k trades) — 01:05:25 (3 min 32 sec per month)
The most consuming part of the…
14👍7🔥4❤2🐳2
❤4🐳2
CommunityPower 2.61.ex5
1.8 MB
💪 CommunityPower EA v2.61 has been released!
[+] Spread: Apply to close parameter
[*] Lot: Risk per trade mode takes into account Individual StopLoss first, and only if it is disabled, the series StopLoss is used
[+] News: Consider weekend parameter
[*] PartialClose refactored, speed increased
[*] ActivePeriods and CollectiveSignal refactored
[+] Backtesting and optimization speed increased
[+] Individual TakeProfit with “coefficient to SL” mode
This is the last version before the Multi-symbol version release.
The first beta of the multi-symbol version will be published later today — it’s fully prepared and ready to go.
Congratulations to all of you — we’re entering an exciting new era! 🥳
#new_version
[+] Spread: Apply to close parameter
[*] Lot: Risk per trade mode takes into account Individual StopLoss first, and only if it is disabled, the series StopLoss is used
[+] News: Consider weekend parameter
[*] PartialClose refactored, speed increased
[*] ActivePeriods and CollectiveSignal refactored
[+] Backtesting and optimization speed increased
[+] Individual TakeProfit with “coefficient to SL” mode
Warning
All set-files with active Individual TP must be reviewed!
The first beta of the multi-symbol version will be published later today — it’s fully prepared and ready to go.
Congratulations to all of you — we’re entering an exciting new era! 🥳
#new_version
53👍13❤8🔥3👏3🐳2🎉1
CommunityPower 3.0 MS.ex5
1.8 MB
This is the first official multi-symbol version. Now you can backtest and run live your multi-symbol strategies, try different risk-management and account-management approaches (MT5 only).
MA filters have also been improved to work better on small timeframes and symbols with high spreads.
More improvements are coming soon, I have developed a lot over the past months and am actively testing new features. A new beta version will be released in January.
I'm also going to start a small closed (but still free) community for the most active members who want to develop strategies together, sharing optimization and tuning efforts among other members. Stay tuned, I'll post an invite link in this channel
#new_version
Please open Telegram to view this post
VIEW IN TELEGRAM
19🔥17❤14👍13👏5😱1🐳1
CommunityPower 3.0.19 MS.ex5
1.9 MB
💪 CommunityPower EA v3.0.19 is here!
Please, check your existing set-files and test the new features before the v3.1 release.
The list of improvements is quite long. The main change is the universal Distance calculator which is used for all parameters nominated in points and in some filters (Big candle, MA, ZZ, Line, Pivot). It is even more powerful than before, allowing more volatility modes and Percentage mode.
The full list of changes you can find on the Versions history page, as usual.
Please report any bugs you find so I can fix them before release.
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
Please, check your existing set-files and test the new features before the v3.1 release.
The list of improvements is quite long. The main change is the universal Distance calculator which is used for all parameters nominated in points and in some filters (Big candle, MA, ZZ, Line, Pivot). It is even more powerful than before, allowing more volatility modes and Percentage mode.
The full list of changes you can find on the Versions history page, as usual.
Please report any bugs you find so I can fix them before release.
It is a beta-version, don't update if you don't want to check these specific improvements.
#beta
9🔥9❤6👍6
Dear community!
Our team has created a new tool that shows you all your trading expenses in one place — DeepPip.com. You can check things like spreads, slippages, commission, how fast your trades happen and more. In other words, you can see the total cost of trading for each symbol and compare it with other accounts and brokers.
This tool will help you see exactly how much you're spending on trading. You can easily compare costs between different accounts and find the best place to trade to save money and make more profit.
We've just launched our first version and would love to hear what you think:
- Is the tool easy to understand?
- Do you find tracking trading costs helpful?
- Did you have any trouble connecting your account?
- Any other thoughts or suggestions?
Right now, DeepPip only works with MT4 accounts and mainly for Forex trading. This means you might see some incorrect calculations for other types of trades like Brent oil or Bitcoin.
We appreciate any feedback you can share — it helps us make the tool better for you!
💪💪💪
Our team has created a new tool that shows you all your trading expenses in one place — DeepPip.com. You can check things like spreads, slippages, commission, how fast your trades happen and more. In other words, you can see the total cost of trading for each symbol and compare it with other accounts and brokers.
This tool will help you see exactly how much you're spending on trading. You can easily compare costs between different accounts and find the best place to trade to save money and make more profit.
We've just launched our first version and would love to hear what you think:
- Is the tool easy to understand?
- Do you find tracking trading costs helpful?
- Did you have any trouble connecting your account?
- Any other thoughts or suggestions?
Right now, DeepPip only works with MT4 accounts and mainly for Forex trading. This means you might see some incorrect calculations for other types of trades like Brent oil or Bitcoin.
We appreciate any feedback you can share — it helps us make the tool better for you!
💪💪💪
5👍5🔥4❤2👏1
CommunityPower 3.01.ex5
2.8 MB
Distance calculator has been improved with new modes, Martingale has became even more flexible, a CloseBy option has been added for faster exits, bugs have been fixed and overall speed has been improved.
Detailed change-log is on the web-site, as usual.
Do not forget to open new accounts using my partner links, it will allow me to put more effort into the development of the project.
Thank you and have a great weekend!
#new_version
Please open Telegram to view this post
VIEW IN TELEGRAM
20❤22👍8🔥2👌2👏1