CVE-2026-113383 - Optimal IdM OptimalCloud Login cross site scripting
CVE ID :CVE-2026-113383
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :A vulnerability was detected in Optimal IdM OptimalCloud 5.0. This affects an unknown part of the file /v5.0/webapps/pages/public/Login. Performing a manipulation of the argument tz results in cross site scripting. Remote exploitation of the attack is possible. The vendor was contacted early about this disclosure but did not respond in any way.
Severity: 5.0 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-113383
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :A vulnerability was detected in Optimal IdM OptimalCloud 5.0. This affects an unknown part of the file /v5.0/webapps/pages/public/Login. Performing a manipulation of the argument tz results in cross site scripting. Remote exploitation of the attack is possible. The vendor was contacted early about this disclosure but did not respond in any way.
Severity: 5.0 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-113384 - Optimal IdM OptimalCloud social redirect
CVE ID :CVE-2026-113384
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :A flaw has been found in Optimal IdM OptimalCloud 5.0. This vulnerability affects unknown code of the file /v5.0/social. Executing a manipulation of the argument state can lead to open redirect. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way.
Severity: 5.0 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-113384
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :A flaw has been found in Optimal IdM OptimalCloud 5.0. This vulnerability affects unknown code of the file /v5.0/social. Executing a manipulation of the argument state can lead to open redirect. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way.
Severity: 5.0 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-9589 - Unblu Spark Authorization Bypass in Configuration Cascade Operations
CVE ID :CVE-2026-9589
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :Missing authorization in the configuration cascade operations of the Collaboration Server in Unblu inc. Unblu Spark 7.0 through 8.36.1-hotfix.0, on on-premises and cloud deployments, allows an authenticated remote attacker to read and change configuration properties of entities they aren't authorized to access, including other users, other accounts and, in Unblu Cloud, other customers' accounts, via configuration read and write operations that target those entities. The Collaboration Server doesn't check whether the user reading or changing configuration has access to the entity the configuration belongs to. With certain non-default configuration validation settings, a registered user can additionally write configuration properties they aren't allowed to edit, in any scope. Exploitation requires an authenticated session but no user interaction.
Severity: 9.3 | CRITICAL
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-9589
Published : Oct. 20, 2026, 11:17 a.m. | 22 minutes ago
Description :Missing authorization in the configuration cascade operations of the Collaboration Server in Unblu inc. Unblu Spark 7.0 through 8.36.1-hotfix.0, on on-premises and cloud deployments, allows an authenticated remote attacker to read and change configuration properties of entities they aren't authorized to access, including other users, other accounts and, in Unblu Cloud, other customers' accounts, via configuration read and write operations that target those entities. The Collaboration Server doesn't check whether the user reading or changing configuration has access to the entity the configuration belongs to. With certain non-default configuration validation settings, a registered user can additionally write configuration properties they aren't allowed to edit, in any scope. Exploitation requires an authenticated session but no user interaction.
Severity: 9.3 | CRITICAL
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-112941 - filelock: SoftReadWriteLock follows a lock tree swapped in after its first acquire and writes lock records into directories of the user running the lock
CVE ID :CVE-2026-112941
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftReadWriteLock and AsyncSoftReadWriteLock cache a successful check of the .rw lock tree and resolve its names again during later record operations, allowing another local user who can replace that tree after the first acquisition to redirect lock-record writes into directories writable by the lock user. This issue is fixed in version 4.2.1.
Severity: 3.3 | LOW
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-112941
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftReadWriteLock and AsyncSoftReadWriteLock cache a successful check of the .rw lock tree and resolve its names again during later record operations, allowing another local user who can replace that tree after the first acquisition to redirect lock-record writes into directories writable by the lock user. This issue is fixed in version 4.2.1.
Severity: 3.3 | LOW
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-112942 - launch-editor: `fs.existsSync()` existence check can be bypassed on Windows
CVE ID :CVE-2026-112942
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, launch-editor-middleware processes an attacker-controlled Windows file argument where the file argument ends in a parent-directory component plus a line-and-column suffix: the path is resolved while the suffix is still present, and launch-editor removes the suffix before its existsSync check, leaving the existing parent directory for existsSync and allowing the attacker-controlled file argument to pass filename existence validation without requiring the malicious filename to exist. The bypass can lead to OS command injection when combined with the separately described Windows percent-expansion flaw. This issue is fixed in version 2.14.2.
Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-112942
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, launch-editor-middleware processes an attacker-controlled Windows file argument where the file argument ends in a parent-directory component plus a line-and-column suffix: the path is resolved while the suffix is still present, and launch-editor removes the suffix before its existsSync check, leaving the existing parent directory for existsSync and allowing the attacker-controlled file argument to pass filename existence validation without requiring the malicious filename to exist. The bypass can lead to OS command injection when combined with the separately described Windows percent-expansion flaw. This issue is fixed in version 2.14.2.
Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-112943 - launch-editor: escapeCmdArgs() omits % escaping on Windows
CVE ID :CVE-2026-112943
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, launch-editor did not escape % on Windows when passing an argument to cmd. When an environment variable contained a malicious value, it was possible that that content to be executed. This vulnerability is fixed in 2.14.2.
Severity: 6.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-112943
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, launch-editor did not escape % on Windows when passing an argument to cmd. When an environment variable contained a malicious value, it was possible that that content to be executed. This vulnerability is fixed in 2.14.2.
Severity: 6.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-112944 - launch-editor: Editor CLI flag misinterpretation causing arbitrary command execution for some editors
CVE ID :CVE-2026-112944
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, when an attacker can create a filesystem entry beginning with plus or minus in the working directory, an affected editor is selected, and the path can remain relative or is converted to a relative WSL path, launchEditor forwards the path without forcing it to be interpreted as a positional filename. Editor option parsing then treats the attacker-controlled filename as a command-line flag, which can cause unintended file overwrite or arbitrary command execution by the selected editor. The affected editors are Vim and gVim, MacVim, Emacs and Emacsclient, and Notepad++ when a plugin exposes dangerous operations; WSL path conversion keeps Vite and newer middleware callers exposed. This issue is fixed in version 2.14.2.
Severity: 6.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-112944
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, when an attacker can create a filesystem entry beginning with plus or minus in the working directory, an affected editor is selected, and the path can remain relative or is converted to a relative WSL path, launchEditor forwards the path without forcing it to be interpreted as a positional filename. Editor option parsing then treats the attacker-controlled filename as a command-line flag, which can cause unintended file overwrite or arbitrary command execution by the selected editor. The affected editors are Vim and gVim, MacVim, Emacs and Emacsclient, and Notepad++ when a plugin exposes dangerous operations; WSL path conversion keeps Vite and newer middleware callers exposed. This issue is fixed in version 2.14.2.
Severity: 6.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-113397 - DrayTek Vigor2960 IPsec mainfunction.cgi ruequest_certificate command injection
CVE ID :CVE-2026-113397
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A security vulnerability has been detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function ruequest_certificate of the file /cgi-bin/mainfunction.cgi of the component IPsec Handler. Such manipulation of the argument option leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 1.5.1.7 mitigates this issue. Upgrading the affected component is recommended. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
Severity: 7.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-113397
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A security vulnerability has been detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function ruequest_certificate of the file /cgi-bin/mainfunction.cgi of the component IPsec Handler. Such manipulation of the argument option leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 1.5.1.7 mitigates this issue. Upgrading the affected component is recommended. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
Severity: 7.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-113411 - Nerimity Desktop Window Open mainWindow.js shell.openExternal improper authorization in handler for custom url scheme
CVE ID :CVE-2026-113411
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A vulnerability was found in Nerimity Desktop up to 2.2.2. Affected by this issue is the function shell.openExternal of the file src/mainWindow.js of the component Window Open Handler. The manipulation of the argument url results in improper authorization in handler for custom url scheme. The attack can be executed remotely. The exploit has been made public and could be used. Upgrading to version 2.3.3 can resolve this issue. The patch is identified as f4df21bbc290f6c1956d899cf4da9e963074a6e4. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.
Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-113411
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A vulnerability was found in Nerimity Desktop up to 2.2.2. Affected by this issue is the function shell.openExternal of the file src/mainWindow.js of the component Window Open Handler. The manipulation of the argument url results in improper authorization in handler for custom url scheme. The attack can be executed remotely. The exploit has been made public and could be used. Upgrading to version 2.3.3 can resolve this issue. The patch is identified as f4df21bbc290f6c1956d899cf4da9e963074a6e4. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.
Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-113466 - MinIO Embedded Console common-main.go SessionTokenAuthenticate hard-coded key
CVE ID :CVE-2026-113466
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A security vulnerability has been detected in MinIO up to RELEASE.2025-10-15T17-29-55Z. This issue affects the function globalDeploymentID/SessionTokenAuthenticate of the file cmd/common-main.go of the component Embedded Console. Such manipulation leads to use of hard-coded cryptographic key . It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Severity: 5.5 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-113466
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :A security vulnerability has been detected in MinIO up to RELEASE.2025-10-15T17-29-55Z. This issue affects the function globalDeploymentID/SessionTokenAuthenticate of the file cmd/common-main.go of the component Embedded Console. Such manipulation leads to use of hard-coded cryptographic key . It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Severity: 5.5 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-95109 - Cortex-A7 module data validation checks only the first address of a caller-supplied range
CVE ID :CVE-2026-95109
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start. A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on.
Severity: 8.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-95109
Published : Oct. 20, 2026, 3:17 p.m. | 27 minutes ago
Description :The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start. A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on.
Severity: 8.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-91059 - JPEG decoder: a duplicate SOF0 after SOS publishes a pixelmap that misreports its own allocation size
CVE ID :CVE-2026-91059
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it. Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path. Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-91059
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it. Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path. Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-91186 - PNG decoder: a duplicate IHDR chunk after IDAT resizes the image after allocation, causing a heap out-of-bounds write
CVE ID :CVE-2026-91186
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The PNG chunk reader has no notion of chunk ordering. It records whether an IDAT has been seen and whether a tRNS has already supplied transparency, but nothing prevents an IHDR being read a second time. A PNG carries exactly one IHDR and it is the first chunk. A file that places a second one after IDAT rewrites the image width, height, bit depth and pixel depth *after* the decoded-data buffer has already been allocated and filled from the original values. The pass that reverses the PNG row filters then derives its own extent from the new dimensions and walks the old allocation, moving image bytes past the end of it. The buffer is allocated by GUIX rather than supplied by the caller, so the application has no way to size it defensively. The decoder is compiled in by default.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-91186
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The PNG chunk reader has no notion of chunk ordering. It records whether an IDAT has been seen and whether a tRNS has already supplied transparency, but nothing prevents an IHDR being read a second time. A PNG carries exactly one IHDR and it is the first chunk. A file that places a second one after IDAT rewrites the image width, height, bit depth and pixel depth *after* the decoded-data buffer has already been allocated and filled from the original values. The pass that reverses the PNG row filters then derives its own extent from the new dimensions and walks the old allocation, moving image bytes past the end of it. The buffer is allocated by GUIX rather than supplied by the caller, so the application has no way to size it defensively. The decoder is compiled in by default.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-91189 - GUIX binary resource loader: unvalidated glyph range causes an integer underflow and a heap out-of-bounds write when loading an untrusted font or theme
CVE ID :CVE-2026-91189
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer.
Severity: 7.1 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-91189
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer.
Severity: 7.1 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92162 - Flatpak vulnerable to path traversal via unvalidated "arch" parameter in DeployAppstream
CVE ID :CVE-2026-92162
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. Prior to version 1.18.1, on systems where at least one OCI remote is configured (most common on Fedora systems), a malicious local user in an active local session could use a crafted architecture name to trick the `flatpak-system-helper` process into creating a root-owned directory tree with contents determined by the OCI remote, plus a root-owned `lock` file and `icons` directory, outside the intended root directory. If this vulnerability is combined with other vulnerabilities also fixed in 1.18.1, the combination can lead to local root privilege escalation. This particular vulnerability is not believed to be exploitable if there are no OCI remotes configured (common on non-Fedora systems). Version 1.18.1 patches the issue.
Severity: 7.2 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92162
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. Prior to version 1.18.1, on systems where at least one OCI remote is configured (most common on Fedora systems), a malicious local user in an active local session could use a crafted architecture name to trick the `flatpak-system-helper` process into creating a root-owned directory tree with contents determined by the OCI remote, plus a root-owned `lock` file and `icons` directory, outside the intended root directory. If this vulnerability is combined with other vulnerabilities also fixed in 1.18.1, the combination can lead to local root privilege escalation. This particular vulnerability is not believed to be exploitable if there are no OCI remotes configured (common on non-Fedora systems). Version 1.18.1 patches the issue.
Severity: 7.2 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92446 - GUIX binary resource loader reads past the end of a resource, because no length for it ever reaches the loader
CVE ID :CVE-2026-92446
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :`gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded. This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92446
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :`gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded. This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92449 - Binary resource loader: unbounded map_id from a theme file causes a heap out-of-bounds write in the GUIX-allocated arena
CVE ID :CVE-2026-92449
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92449
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92454 - JPEG decoder: truncated segments are read past the image buffer, and a zero sampling factor hangs the decode
CVE ID :CVE-2026-92454
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92454
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled.
Severity: 6.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-95111 - Module queue front-send validates a word count as a byte count
CVE ID :CVE-2026-95111
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes. The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied. A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back.
Severity: 4.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-95111
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes. The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied. A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back.
Severity: 4.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-95168 - TheFuck Arbitrary Code Execution Vulnerability
CVE ID :CVE-2026-95168
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :An issue in nvbn thefuck v.3.32 allows a local attacker to execute arbitrary code via the get_rules_import_paths in thefuck/corrector.py and Rule.from_path in thefuck/types.py
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-95168
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :An issue in nvbn thefuck v.3.32 allows a local attacker to execute arbitrary code via the get_rules_import_paths in thefuck/corrector.py and Rule.from_path in thefuck/types.py
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-96402 - USBX PIMA/MTP host class reads past its receive buffer when a device over-reports its object handle count
CVE ID :CVE-2026-96402
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page.
Severity: 5.2 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-96402
Published : Oct. 20, 2026, 3:17 p.m. | 26 minutes ago
Description :A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page.
Severity: 5.2 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...